Modeling of macrosegregation in direct-chill casting of aluminum alloys: Estimating the influence of casting parameters

Abstract The influences of the most important process parameters on macrosegregation in Al–5.25 wt.% Cu direct-chill cast billets of 218 and 282 mm diameter were studied by performing numerical simulations. Solidification and transport of heat, momentum, and species were modeled using the Bennon–Incropera one-phase continuum mixture model. A rigid, coalesced solid phase was assumed in the mushy zone, which was modeled as a porous medium. The model was solved numerically, using the finite volume method in axisymmetric geometry. Five cases, encompassing variations of billet diameter, casting velocity, casting temperature, and mold cooling type were simulated. A detailed analysis of the interplay of transport of species by flows induced by thermal and solutal natural convection as well as by solidification shrinkage and their effect on the final macrosegregation pattern is given. It was shown that the process parameters affect macrosegregation through their direct impact on the thermosolutal flow in the liquid pool and the mushy zone. The main factors were shown to be the depth of the liquid pool, and the temperature difference that drives the thermal natural convection in the liquid pool.

[1]  Christoph Beckermann,et al.  Modelling of macrosegregation: applications and future needs , 2002 .

[2]  M. Krane,et al.  Direct Chill Casting of Aluminum Alloys: Modeling and Experiments on Industrial Scale Ingots , 2001, Heat Transfer: Volume 6 — Heat Transfer in Materials Processing.

[3]  D. C. Weckman,et al.  A numerical simulation of the D.C. continuous casting process including nucleate boiling heat transfer , 1982 .

[4]  D. Gobin,et al.  Cooperating thermosolutal convection in enclosures—II. Heat transfer and flow structure , 1996 .

[5]  E. A. Starke,et al.  Aluminum alloys their physical and mechanical properties , 1986 .

[6]  Michel Rappaz,et al.  Modeling of casting, welding and advanced solidification processes-V : proceedings of the fifth International Conference on Modeling of Casting and Welding Processes, held in Davos Switzerland, September 16-21, 1990 , 1991 .

[7]  L. Katgerman,et al.  Structure formation and macrosegregation under different process conditions during DC casting , 2004 .

[8]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[9]  F. Incropera,et al.  A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems—I. Model formulation , 1987 .

[10]  A. V. Reddy,et al.  Modeling of macrosegregation due to thermosolutal convection and contraction-driven flow in direct chill continuous casting of an Al-Cu round ingot , 1997 .

[11]  Katta G. Murty,et al.  On KΔ , 1986, Discret. Appl. Math..

[12]  F. Incropera,et al.  The effect of free-floating dendrites and convection on macrosegregation in direct chill cast aluminum alloys. Part II : predictions for Al-Cu and Al-Mg alloys , 2000 .