MEMS reliability: The challenge and the promise

MicroElectroMechanical Systems (MEMS) that think, sense, act and communicate will open up a broad new array of cost effective solutions only if they prove to be sufficiently reliable. A valid reliability assessment of MEMS has three prerequisites: (1) statistical significance; (2) a technique for accelerating fundamental failure mechanisms, and (3) valid physical models to allow prediction of failures during actual use. These already exist for the microelectronics portion of such integrated systems. The challenge lies in the less well understood micromachine portions and its synergistic effects with microelectronics. This paper presents a methodology addressing these prerequisites and a description of the underlying physics of reliability for micromachines.

[1]  Sophie Verdonckt-Vandebroek.  Micromachining technology for thermal ink-jet products , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[2]  Jack A. Collins,et al.  Failure of materials in mechanical design , 1981 .

[3]  Danelle M. Tanner,et al.  First reliability test of a surface-micromachined microengine using SHiMMeR , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[4]  D. M. Tanner,et al.  The effect of frequency on the lifetime of a surface micromachined microengine driving a load , 1998, 1998 IEEE International Reliability Physics Symposium Proceedings. 36th Annual (Cat. No.98CH36173).

[5]  M. R. Douglass,et al.  Lifetime estimates and unique failure mechanisms of the Digital Micromirror Device (DMD) , 1998, 1998 IEEE International Reliability Physics Symposium Proceedings. 36th Annual (Cat. No.98CH36173).

[6]  Paul J. McWhorter,et al.  Performance trade-offs for a surface micromachined microengine , 1996, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[7]  R. L. Edwards,et al.  Measurements of Young's modulus, Poisson's ratio, and tensile strength of polysilicon , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.