论文信息 - Engineering Validation and Engineering Design of Lithium Target Facility in IFMIF/EVEDA Project - 字舞流文

Engineering Validation and Engineering Design of Lithium Target Facility in IFMIF/EVEDA Project

Abstract EVEDA Lithium Test Loop (ELTL) has been designed and constructed, has operated a liquid lithium flow test facility with the world’s highest flow rate and has succeeded in generating a 100-mm-wide and 25-mm-thick free-surface lithium flow along a concave back plate steadily at a high speed of 20 m/s at 300°C for the first time in the world. This result will greatly advance the development of an accelerator-based neutron source to high energy and high density, one of the key objectives of the fusion reactor materials development under the BA (Broader Approach) Activities. Recent related engineering validation and engineering design of the lithium facility has been evaluated.

Akihiro Suzuki | Hisashi Serizawa | Eiichi Wakai | Masayoshi Sugimoto | F. Groeschel | F. S. Nitti | Hiroo Kondo | Yasushi Hirakawa | Yoshiyuki Tsuji | Satoshi Fukada | Tomohiro Furukawa | Mizuho Ida | Hiroshi Horiike | Takuji Kanemura | Juro Yagi | R. Heidinger | Juan Knaster | K. Furuya | Angel Ibarra | G. Micchiche | Yousuke Kawahito | Yuki Edao | Eiji Hoashi | R. Heidinger | M. Ida | Y. Kawahito | E. Wakai | J. Knaster | E. Hoashi | K. Watanabe | J. Yagi | H. Horiike | Kazuhiro Watanabe | T. Kanemura | S. Fukada | T. Furukawa | Kouji Fujishiro | Yoshinori Ito | S. Niitsuma | K. Nakaniwa | Y. Sugie | F. Nitti | M. Sugimoto | Y. Edao | F. Groeschel | K. Furuya | H. Kondo | Y. Sugie | Y. Hirakawa | Y. Ito | A. Ibarra | S. Niitsuma | K. Fujishiro | K. Nakaniwa | H. Serizawa | A. Suzuki | Y. Tsuji | G. Micchiche

[1] Eiichi Wakai,et al. Measurement of Li target thickness in the EVEDA Li Test Loop , 2015 .

[2] E. Wakai,et al. Current status of the technology development on lithium safety handling under IFMIF/EVEDA , 2014 .

[3] Eiichi Wakai,et al. The start-up and observation of the Li target in the EVEDA Li test loop , 2014 .

[4] Satoshi Fukada,et al. Trapping of deuterium dissolved in fluidized Li by Y , 2014 .

[5] N. Casal,et al. Current status of the engineering design of the test modules for the IFMIF , 2013 .

[6] M. Ida,et al. Fabrication and performance test of contact-type liquid level sensor for measuring thickness variation of liquid lithium jet in the IFMIF/EVEDA lithium test loop , 2013 .

[7] A. Ibarra,et al. IFMIF: overview of the validation activities , 2013 .

[8] Eiichi Wakai,et al. Completion of IFMIF/EVEDA lithium test loop construction , 2012 .

[9] Eiichi Wakai,et al. Analysis of Test Matrix and Design Status of Test Modules in IFMIF , 2012 .

[10] Akihiro Suzuki,et al. IFMIF/EVEDA lithium test loop: design and fabrication technology of target assembly as a key component , 2011 .

[11] Akihiro Suzuki,et al. Nitrogen contamination effect on yttrium gettering of hydrogen in liquid lithium , 2011 .

[12] Eiichi Wakai,et al. Design plan and requirement of test module and testing items in IFMIF , 2011 .

[13] Akihiro Suzuki,et al. Design of purification loop and traps for the IFMIF/EVEDA Li Test Loop: Design of cold trap , 2011 .

[14] T. Terai,et al. Fabrication of nitrogen trapping test loop for IFMIF-EVEDA , 2011 .

[15] M. Ida,et al. Safety concept of the IFMIF/EVEDA lithium test loop , 2011 .

[16] E. Wakai,et al. Reduction method of DBTT shift due to irradiation for reduced-activation ferritic/martensitic steels , 2010 .

[17] Pascal Garin,et al. Start of the engineering validation and design phase of IFMIF , 2009 .

[18] Anton Möslang,et al. Design optimization and experimental testing of the High-Flux Test Module of IFMIF , 2009 .

[19] Satoshi Fukada,et al. Verification to recover tritium in neutron-irradiated Li by Y plate , 2007 .

[20] E. Wakai,et al. Effect of gas atoms and displacement damage on mechanical properties and microstructures of F82H , 2006 .

[21] Satoru Tanaka,et al. Control of nitrogen concentration in liquid lithium by iron–titanium alloy , 2006 .

[22] Satoru Tanaka,et al. Gettering of nitrogen in liquid lithium , 2005 .

[23] S. Jitsukawa,et al. Radiation hardening and -embrittlement due to He production in F82H steel irradiated at 250 °C in JMTR , 2005 .

[24] E. Wakai,et al. Effect of Initial Heat Treatment on DBTT of F82H Steel Irradiated by Neutrons , 2005 .

[25] S. Jitsukawa,et al. Effects of Helium Production and Heat Treatment on Neutron Irradiation Hardening of F82H Steels Irradiated with Neutrons , 2005 .

[26] E. Wakai,et al. Point Defect Formation in V-4Cr-4Ti and F82H Irradiated with Fission and Fusion Neutrons , 2005 .

[27] H. Matsui,et al. Present status of the liquid lithium target facility in the international fusion materials irradiation facility (IFMIF) , 2004 .

[28] E. Wakai,et al. Effect of tempering temperature and time on tensile properties of F82H irradiated by neutrons , 2004 .

[29] E. Wakai,et al. Swelling behavior of F82H steel irradiated by triple/dual ion beams , 2003 .

[30] A. Hishinuma,et al. Swelling of cold-worked austenitic stainless steels irradiated in HFIR under spectrally tailored conditions , 2002 .

[31] S. Jitsukawa,et al. Microstructural study of irradiated isotopically tailored F82H steel , 2002 .

[32] M. Ida,et al. Thermal-hydraulic characteristics of IFMIF liquid lithium target , 2002 .

[33] E. Wakai,et al. Effect of triple ion beams in ferritic/martensitic steel on swelling behavior , 2002 .

[34] K. Shiba,et al. Effect of helium production on swelling of F82H irradiated in HFIR , 2000 .

[35] A. Hishinuma,et al. Tensile properties and damage microstructures in ORR/HFIR-irradiated austenitic stainless steels , 2000 .

[36] K. Natesan,et al. Influence of nonmetallic elements on the compatibility of structural materials with liquid alkali metals , 1983 .

[37] A. Mosnier. STATUS OF THE IFMIF-EVEDA 9 MeV 125 MA DEUTERON LINAC , 2013 .