A robustness-based design strategy for composite structures

Purpose – This paper aims to present a new robustness-based design strategy for thin-walled composite structures under compressive loading, which combines strength requirements in terms of the limit and ultimate load with robustness requirements evaluated from the structural energy until collapse. Design/methodology/approach – In order to assess the structural energy, the area under the load-shortening curve between several characteristic points such as local buckling, global buckling, onset of degradation and collapse load is calculated. In this context, a geometrically nonlinear finite element analysis is carried out, in which the ply properties are selectively degraded by progressive failure. Findings – The advantage of the proposed methodology is observed by analyzing unstiffened composite plates under compressive loading, wherein the lightest plate that satisfies both strength and robustness requirements can be attained. Practical implications – As a practical implication, this methodology gives a ne...

[1]  W. T. Koiter.  Over de stabiliteit van het elastisch evenwicht , 1945 .

[2]  W. T. Koiter.  THE STABILITY OF ELASTIC EQUILIBRIUM , 1970 .

[3]  Donald O. Dusenberry,et al.  Best Practices for Reducing the Potential for Progressive Collapse in Buildings | NIST , 2007 .

[4]  Tae Hee Lee,et al.  Robust Design: An Overview , 2006 .

[5]  Johann Arbocz,et al.  The effect of general imperfections on the buckling of cylindrical shells , 1968 .

[6]  Donald O. Dusenberry,et al.  Building Design for Abnormal Loads and Progressive Collapse , 2005 .

[7]  Uwe Starossek,et al.  Progressive Collapse of Structures: Nomenclature and Procedures , 2006 .

[8]  Dan M. Frangopol,et al.  Effects of Damage and Redundancy on Structural Reliability , 1987 .

[9]  Uwe Starossek,et al.  Approaches to measures of structural robustness , 2011 .

[10]  Gila Ghilai,et al.  COCOMAT DESIGN AND ANALYSIS GUIDELINES FOR CFRP-STIFFENED PANELS IN BUCKLING AND POSTBUCKLING , 2010 .

[11]  Uwe Starossek,et al.  Disproportionate Collapse: Terminology and Procedures , 2010 .

[12]  Rodney S. Thomson,et al.  Robust design – A concept for imperfection insensitive composite structures , 2010 .

[13]  Rolf Zimmermann,et al.  Buckling and postbuckling of stringer stiffened fibre composite curved panels – Tests and computations , 2006 .

[14]  Raimund Rolfes,et al.  POSICOSS—improved postbuckling simulation for design of fibre composite stiffened fuselage structures , 2006 .

[15]  J. P. Peterson,et al.  Buckling of thin-walled circular cylinders, NASA SPACE VEHICLE DESIGN CRITERIA (Structures) , 1965 .

[16]  John William Smith.  Structural Robustness Analysis and the Fast Fracture Analogy , 2006 .

[17]  Richard Degenhardt,et al.  Analysis of structures under uncertainties , 2011 .

[18]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[19]  Dan M. Frangopol,et al.  Balancing weight, system reliability and redundancy in a multiobjective optimization framework , 1990 .

[20]  Jack W. Baker,et al.  On the assessment of robustness , 2008 .

[21]  Niels C. Lind.  A measure of vulnerability and damage tolerance , 1995 .

[22]  S. Rahman.  Reliability Engineering and System Safety , 2011 .

[23]  Richard Degenhardt,et al.  COCOMAT—improved material exploitation of composite airframe structures by accurate simulation of postbuckling and collapse , 2006 .

[24]  R. Degenhardt,et al.  FE-Simulation von axial gedrückten, versteiften CFK-Paneelen , 2004 .

[25]  Richard Degenhardt,et al.  Validation procedure for nonlinear analysis of stringer stiffened CFRP Panels , 2006 .

[26]  Raimund Rolfes,et al.  Semi-analytic probabilistic analysis of axially compressed stiffened composite panels , 2012 .

[27]  Richard Degenhardt,et al.  Investigations on imperfection sensitivity and deduction of improved knock-down factors for unstiffened CFRP cylindrical shells , 2010 .