Bladed wheels damage detection through Non-Harmonic Fourier Analysis improved algorithm

Abstract Recent papers introduced the Non-Harmonic Fourier Analysis for bladed wheels damage detection. This technique showed its potential in estimating the frequency of sinusoidal signals even when the acquisition time is short with respect to the vibration period, provided that some hypothesis are fulfilled. Anyway, previously proposed algorithms showed severe limitations in cracks detection at their early stage. The present paper proposes an improved algorithm which allows to detect a blade vibration frequency shift due to a crack whose size is really small compared to the blade width. Such a technique could be implemented for condition-based maintenance, allowing to use non-contact methods for vibration measurements. A stator-fixed laser sensor could monitor all the blades as they pass in front of the spot, giving precious information about the wheel health. This configuration determines an acquisition time for each blade which become shorter as the machine rotational speed increases. In this situation, traditional Discrete Fourier Transform analysis results in poor frequency resolution, being not suitable for small frequency shift detection. Non-Harmonic Fourier Analysis instead showed high reliability in vibration frequency estimation even with data samples collected in a short time range. A description of the improved algorithm is provided in the paper, along with a comparison with the previous one. Finally, a validation of the method is presented, based on finite element simulations results.

[1]  P. S. Heyns,et al.  Eulerian laser Doppler vibrometry: Online blade damage identification on a multi-blade test rotor , 2011 .

[2]  P BlochHeinz,et al.  STEAM TURBINES DESIGN, APPLICATIONS, AND RE-RATING , 2009 .

[3]  C. Hah,et al.  Inlet Flow Distortion and Unsteady Blade Response in a Transonic Axial-Compressor Rotor , 1999 .

[4]  C Deschênes,et al.  Part 1 – Experimental study of the pressure fluctuations on propeller turbine runner blades during steady-state operation , 2012 .

[5]  Paolo Neri,et al.  Analytical investigation of the SAFE diagram for bladed wheels, numerical and experimental validation , 2014 .

[6]  Mehmet Imregun,et al.  An improved single-parameter tip-timing method for turbomachinery blade vibration measurements using optical laser probes , 1996 .

[7]  R Coats,et al.  BLADE FAILURES IN THE H.P. TURBINES OF R.M.S. QUEEN ELIZABETH 2 AND THEIR RECTIFICATION , 1970 .

[8]  Tadanobu Misawa,et al.  Noise reduction for periodic signals using high-resolution frequency analysis , 2011 .

[9]  Roger D. Quinn,et al.  Laser vibrometry measurements of rotating blade vibrations , 1995 .

[10]  R. A. Cookson,et al.  A Fiber-Optic Laser-Doppler Probe for Vibration Analysis of Rotating Machines , 1979 .

[11]  Paolo Castellini,et al.  Development of the tracking laser vibrometer: Performance and uncertainty analysis , 2000 .

[12]  R. Abhari,et al.  Experimental Study on Impeller Blade Vibration During Resonance—Part I: Blade Vibration Due to Inlet Flow Distortion , 2009 .

[13]  B. O. Al-Bedoor,et al.  Vibration Measurement of Rotating Blades Using a Root Embedded PZT Sensor , 2008 .

[14]  Paolo Neri,et al.  Robot Assisted Modal Analysis on a Stationary Bladed Wheel , 2014 .

[15]  Paolo Neri,et al.  Excitation device for high frequency vibration analysis: Design and test results , 2018 .

[16]  R. Bishop,et al.  The Mechanics of Vibration , 2011 .

[17]  Antonios Pezouvanis,et al.  Turbocharger blade vibration: Measurement and validation through laser tip-timing , 2012 .

[18]  Dario Di Maio,et al.  Applications of continuous tracking SLDV measurement methods to axially symmetric rotating structures using different excitation methods , 2010 .

[19]  Paolo Neri,et al.  Automated Experimental Modal Analysis of Bladed Wheels with an Anthropomorphic Robotic Station , 2017 .

[20]  P. S. Heyns,et al.  Online condition monitoring of axial-flow turbomachinery blades using rotor-axial Eulerian laser Doppler vibrometry , 2009 .

[21]  Indranil Chattoraj,et al.  An investigation of the failure of low pressure steam turbine blades , 1998 .

[22]  A. Demeulenaere,et al.  Unsteady Blade and Disk Resonant Stress Analysis Due to Supersonic Inlet Guide Vane Wakes , 2008 .

[23]  Yoshimutsu Hirata.  Non-harmonic Fourier analysis available for detecting very low-frequency components , 2005 .

[24]  Craig Lawson,et al.  Tubomachinery blade vibration amplitude measurement through tip timing with capacitance tip clearanc , 2005 .

[25]  Peter Avitabile,et al.  Monitoring the Dynamics of an Operating Helicopter Rotor using 3D Digital Stereophotogrammetry , 2013 .

[26]  Peter Avitabile,et al.  Optical Non-contacting Vibration Measurement of Rotating Turbine Blades II , 2011 .

[27]  Paolo Neri,et al.  Non-Harmonic Fourier Analysis for bladed wheels damage detection , 2015 .