Microstructure and tensile properties of friction welded aluminum alloy AA7075-T6

Solid-state welding processes like friction welding and friction stir welding are now being actively considered for welding aluminum alloy AA7075. In this work, friction welding of AA7075-T6 rods of 13 mm diameter was investigated with an aim to understand the effects of process parameters on weld microstructure and tensile properties. Welds made with various process parameter combinations (incorporating Taguchi methods) were subjected to tensile tests. Microstructural studies and hardness tests were also conducted. The results show that sound joints in AA7075-T6 can be achieved using friction welding, with a joint efficiency of 89% in as-welded condition with careful selection of process parameters. The effects of process parameters are discussed in detail based on microstructural observations.

[1]  Andrzej Służalec,et al.  Thermal effects in friction welding , 1990 .

[2]  A. Hasui,et al.  On the Effect of Faying Face Condition on Weldability in Friction Welding (The 2nd Report) , 1984 .

[3]  Hui Zhang,et al.  Dynamic and static softening behaviors of aluminum alloys during multistage hot deformation , 2004 .

[4]  Seung-Boo Jung,et al.  Effect of friction welding parameters on mechanical and metallurgical properties of aluminium alloy 5052–A36 steel joint , 2003 .

[5]  V. Linton,et al.  Influence of time on residual stresses in friction stir welds in agehardenable 7xxx aluminium alloys , 2008 .

[6]  A. Fuji,et al.  Joining phenomena during friction stage of A7075-T6 aluminium alloy friction weld , 2005 .

[7]  Bekir Sami Yilbas,et al.  Investigation into the properties of friction-welded aluminium bars , 1995 .

[8]  Ahmed Z. Al-Garni,et al.  Friction welding of StAl and AlCu materials , 1995 .

[9]  C. R. Feng,et al.  On fatigue crack initiation from corrosion pits in 7075-T7351 aluminum alloy , 2000 .

[10]  H. Tsubakino,et al.  Dynamic recrystallisation phenomena of commercial purity aluminium during friction welding , 2002 .

[11]  A. Fuji,et al.  Effect of friction welding conditions and aging treatment on mechanical properties of A7075-T6 aluminium alloy friction joints , 2005 .

[12]  V. Balasubramanian,et al.  Effect of Postweld Aging Treatment on Fatigue Behavior of Pulsed Current Welded AA7075 Aluminum Alloy Joints , 2008 .

[13]  Horst-Hannes Cerjak,et al.  Comparative analysis of heat generation in friction welding of steel bars , 2008 .

[14]  A. Fuji,et al.  Effect of friction welding conditions on mechanical properties of A5052 aluminium alloy friction welded joint , 2006 .

[15]  O. Midling,et al.  A process model for friction welding of AlMgSi alloys and AlSiC metal matrix composites—I. Haz temperature and strain rate distribution , 1994 .

[16]  K. Sreekumar,et al.  Metallurgical Studies on Cracked Al–5.5Zn–2.5Mg–1.5Cu Aluminum Alloy Injector Disc of Turbine Rotor , 2008 .

[17]  R. K. Gupta,et al.  Investigation of internal cracks in aluminium alloy AA7075 forging , 2006 .

[18]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .

[19]  M. Maalekian,et al.  Friction welding – critical assessment of literature , 2007 .