Thick SU-8 photolithography for BioMEMS

SU-8, negative-tone epoxy base, photoresist has a great potential for ultra-thick high aspect ratio structures in low cost micro-fabrication technologies. Commercial formulation of NanoTM SU-8 2075 is investigate, process limitations are discuss. Good layer uniformity (few %) for single layer up to 200 μm could be obtained in a covered RC8 (Suss-MicroTec) spin coater, but for ultra-thick microstructures it is also possible to cast on the wafer a volume controlled of resist up to 1.5 mm without barrier. Long baking times are necessary for a well process control. The layout of the photo-masks design and process parameters have great impact on residual stress effects and adhesion failures, especially for dense SU-8 patterns on metallic under layer deposited on silicon wafers. A specific treatment applied before the resist coating definitely solved this problem. Bio-fluidic applications of on-wafer direct prototyping (silicon, glass, plastics) are presented. An example will be given on prototyping dielectophorectic micro-cell manipulation component. The SU-8 fluidic structure is made by a self planarized multi-level process (application for 2,5 to 3D microstructures). Biotechnology applications of integrated micro-cells could be considered thanks to the SU-8 good resistance to PCR (Polymerase Chain Reaction). Future developments are focusing on the SU-8 capabilities for Deep Reactive Ion Etching of plastic and 3D shaping of microstructures using a process called : Multidirectional Inclined Exposure Lithography (MIEL).

[1]  F. Tseng,et al.  A novel fabrication method of embedded micro channels employing simple UV dosage control and antireflection coating , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[2]  Chao-Min Cheng,et al.  Spin coating properties of SU-8 thick-layer photoresist , 2001, SPIE Advanced Lithography.

[3]  Hitoshi Ota,et al.  テーパ形状を有したマイクロ接合素子の加工法;テーパ形状を有したマイクロ接合素子の加工法;Fabrication Process of Micro Bonding Elements with Taper Shape , 2002 .

[4]  Gabi Gruetzner,et al.  Reduction of internal stress in a SU-8-like negative tone photoresist for MEMS applications by chemical modification , 2001, SPIE Advanced Lithography.

[5]  F. Tseng,et al.  Reduction of diffraction effect of UV exposure on SU-8 negative thick photoresist by air gap elimination , 2002 .

[6]  Zheng Cui,et al.  Profile control of SU-8 photoresist using different radiation sources , 2001, Microelectronic and MEMS Technologies.

[7]  Jian Zhang,et al.  Characterization of the polymerization of SU-8 photoresist and its applications in micro-electro-mechanical systems (MEMS) , 2001 .

[8]  Gwo-Bin Lee,et al.  A new fabrication process for ultra-thick microfluidic microstructures utilizing SU-8 photoresist , 2002 .

[9]  Jost Goettert,et al.  Multilevel microstructures and mold inserts fabricated with planar and oblique x-ray lithography of SU-8 negative photoresist , 2001, SPIE MOEMS-MEMS.

[10]  David B. Rhine,et al.  Fabrication of microfluidic devices in silicon and plastic using plasma etching , 2001 .

[11]  Sylvia Daunert,et al.  Design and Fabrication of CD-Like Microfluidic Platforms for Diagnostics: Polymer-Based Microfabrication , 2001 .

[12]  Kyehwan Gil,et al.  A tetrahedral three-facet micro mirror with the inclined deep X-ray process , 2001 .

[13]  Steven J. Holmes,et al.  Negative photoresists for optical lithography , 1997, IBM J. Res. Dev..

[14]  P. Vettiger,et al.  Fabrication of photoplastic high-aspect ratio microparts and micromolds using SU-8 UV resist , 1998 .

[15]  M. Despont,et al.  SU-8: a low-cost negative resist for MEMS , 1997 .

[16]  Yong-Kweon Kim,et al.  UV-LIGA process for high aspect ratio structure using stress barrier and C-shaped etch hole , 2000 .

[17]  Kun Lian,et al.  Improved patterning quality of SU-8 microstructures by optimizing the exposure parameters , 2000, Advanced Lithography.