The application of activated carbon produced from waste printed circuit boards (PCBs) by H3PO4 and steam activation for the removal of malachite green

Abstract Waste printed circuit boards (PCBs) are used as precursor for activated carbons preparation by three ways, that is, AC-H3PO4 is prepared by phosphoric acid activation; AC-H3PO4-Steam is prepared by the steam reactivation to AC-H3PO4, and AC-H3PO4/Steam is prepared by impregnation with phosphoric acid followed by steam. The activated carbons obtained under optimum conditions were characterized using N2 adsorption/desorption isotherms, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Batch adsorption studies were performed to evaluate the adsorption properties of the three adsorbents toward malachite green (MG). Compared with AC-H3PO4, AC-H3PO4-Steam has higher BET surface area (SBET) and microspores content, and less functional groups, indicating steam reactivation has an obvious advantage in improving the physical structure, chemical properties and adsorption capacities of activated carbons. While AC-H3PO4/Steam showed higher yield, lower SBET, more functional groups and higher adsorption capacities for malachite green than that of AC-H3PO4-Steam. For the three adsorbents, the adsorption kinetics followed the pseudo-second-order model. Adsorption experiments indicated that adsorption data fitted the Langmuir equation best than Freundlich and Dubinin–Radushkevich (D–R) models for AC-H3PO4, AC-H3PO4-Steam and AC–H3PO4/Steam. The adsorption has been confirmed to be an endothermic and spontaneous process through the thermodynamic parameters.

[1]  J. D. Ekhe,et al.  Preparation and characterizations of microwave assisted activated carbons from industrial waste lignin for Cu(II) sorption , 2011 .

[2]  Anthony V. Bridgwater,et al.  Principles and practice of biomass fast pyrolysis processes for liquids , 1999 .

[3]  K. Sing.  Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984) , 1985 .

[4]  Eric Forssberg,et al.  Mechanical recycling of waste electric and electronic equipment: a review. , 2003, Journal of hazardous materials.

[5]  M. Khalaf.  Biosorption of reactive dye from textile wastewater by non-viable biomass of Aspergillus niger and Spirogyra sp. , 2008, Bioresource technology.

[6]  Jian Zhang,et al.  Preparation and evaluation of activated carbons from lotus stalk with trimethyl phosphate and tributyl phosphate activation for lead removal , 2013 .

[7]  Kuo-Hsiung Lin,et al.  Exhaust constituent emission factors of printed circuit board pyrolysis processes and its exhaust control. , 2014, Journal of hazardous materials.

[8]  Gordon McKay,et al.  Novel application of the nonmetallic fraction of the recycled printed circuit boards as a toxic heavy metal adsorbent. , 2013, Journal of hazardous materials.

[9]  Wen-sheng Dong,et al.  Preparation of porous carbons from non-metallic fractions of waste printed circuit boards by chemical and physical activation , 2013 .

[10]  A. Sivasamy,et al.  Adsorption of Malachite Green dye onto activated carbon derived from Borassus aethiopum flower biomass. , 2010, Journal of hazardous materials.

[11]  Ahmad B. Albadarin,et al.  Kinetic and thermodynamics of chromium ions adsorption onto low-cost dolomite adsorbent , 2012 .

[12]  B. Samiey,et al.  Kinetics of malachite green fading in alcohol–water binary mixtures , 2010 .

[13]  A. Nemr,et al.  Removal of direct blue-86 from aqueous solution by new activated carbon developed from orange peel. , 2009, Journal of hazardous materials.

[14]  V. Minkova,et al.  Characterization and application of activated carbon produced by H3PO4 and water vapor activation , 2006 .

[15]  S. Wate,et al.  Adsorption of malachite green on groundnut shell waste based powdered activated carbon. , 2007, Waste management.

[16]  B. Hameed,et al.  Equilibrium, kinetics and mechanism of malachite green adsorption on activated carbon prepared from bamboo by K(2)CO(3) activation and subsequent gasification with CO(2). , 2008, Journal of hazardous materials.

[17]  Min Li,et al.  Preparation and N2, CO2 and H2 adsorption of super activated carbon derived from biomass source hemp (Cannabis sativa L.) stem , 2012 .

[18]  Y. Onal,et al.  Investigation kinetics mechanisms of adsorption malachite green onto activated carbon. , 2007, Journal of hazardous materials.

[19]  K. Rao.  Inhibition of DNA synthesis in primary rat hepatocyte cultures by malachite green: a new liver tumor promoter. , 1995, Toxicology letters.

[20]  A. Mittal,et al.  Adsorption kinetics and column operations for the removal and recovery of malachite green from wastewater using bottom ash , 2004 .

[21]  Nan Li,et al.  A novel reuse method for waste printed circuit boards as catalyst for wastewater bearing pyridine degradation , 2014 .

[22]  Ji-won Yang,et al.  Removal of malachite green by adsorption and precipitation using aminopropyl functionalized magnesium phyllosilicate. , 2011, Journal of hazardous materials.

[23]  Mihai Buzatu,et al.  Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery. , 2013, Waste management.

[24]  André Canal Marques,et al.  Printed circuit boards: a review on the perspective of sustainability. , 2013, Journal of environmental management.

[25]  H. Demiral,et al.  Production of activated carbon from olive bagasse by physical activation , 2011 .

[26]  K. Y. Foo,et al.  Preparation, characterization and evaluation of adsorptive properties of orange peel based activated carbon via microwave induced K2CO3 activation. , 2012, Bioresource technology.

[27]  S. Manonmani,et al.  Removal of malachite green from aqueous solution by activated carbon prepared from the epicarp of Ricinus communis by adsorption. , 2010, Journal of hazardous materials.

[28]  Gordon McKay,et al.  SORPTION OF DYE FROM AQUEOUS SOLUTION BY PEAT , 1998 .

[29]  Y. Seki,et al.  Using of activated carbon produced from spent tea leaves for the removal of malachite green from aqueous solution , 2013 .

[30]  L. Gray,et al.  Identification of estrogenic compounds emitted from the combustion of computer printed circuit boards in electronic waste. , 2007, Environmental science & technology.

[31]  Jian Zhang,et al.  Adsorption of malachite green from aqueous solution onto carbon prepared from Arundo donax root. , 2008, Journal of hazardous materials.

[32]  Zhenming Xu,et al.  Recycling of non-metallic fractions from waste printed circuit boards: a review. , 2009, Journal of hazardous materials.

[33]  Jian Zhang,et al.  Adsorptive removal of Cr (VI) by Fe-modified activated carbon prepared from Trapa natans husk , 2010 .

[34]  B. Hameed,et al.  Malachite green adsorption by rattan sawdust: isotherm, kinetic and mechanism modeling. , 2008, Journal of hazardous materials.

[35]  Shivaji Srivastava,et al.  Toxicological effects of malachite green. , 2004, Aquatic toxicology.

[36]  Ala’a H. Al-Muhtaseb,et al.  Adsorption characteristics of natural zeolites as solid adsorbents for phenol removal from aqueous solutions: Kinetics, mechanism, and thermodynamics studies , 2011 .

[37]  Ashish S. Sartape,et al.  Removal of malachite green dye from aqueous solution with adsorption technique using Limonia acidissima (wood apple) shell as low cost adsorbent , 2017 .

[38]  V. Garg,et al.  Dye removal from aqueous solution by adsorption on treated sawdust. , 2003, Bioresource technology.

[39]  Paul T. Williams,et al.  Pore characteristics of activated carbons from the phosphoric acid chemical activation of cotton stalks , 2012 .