Reconstructing the hydraulics of the world’s first industrial complex, the second century CE Barbegal watermills, France

The Barbegal watermill complex, a unique cluster of 16 waterwheels in southern France, was the first known attempt in Europe to set up an industrial-scale complex of machines during the culmination of Roman Civilization in the second century CE. Little is known about the state of technological advance in this period, especially in hydraulics and the contemporary diffusion of knowledge. Since the upper part of the Barbegal mill complex has been destroyed and no traces of the wooden machinery survived, the mode of operation of these mills has long remained elusive. Carbonate incrustations that formed on the woodwork of the mills were used to reconstruct its structure and function, revealing a sophisticated hydraulic setup unique in the history of water mills. The lower mills used an elbow shaped flume to bring water onto overshot millwheels. This flume was specially adapted to the small water basins and serial arrangement of the mills on the slope. Carbonate deposits from ancient water systems are therefore a powerful tool in archaeological reconstructions and provide tantalizing insights into the skills of Roman engineers during a period of history that is the direct predecessor of our modern civilization.

[1]  Vladimiro Pelliciardi.  Overshot waterwheel to power an olive oil mill in Nepal , 2015 .

[2]  R. Sellin.  The large roman water mill at Barbegal (France) , 1981 .

[3]  J. Hélie,et al.  Geochemical study of carbonate concretions from the aqueduct of Nîmes (southern France): a climatic record for the first centuries AD? , 2019, Scientific Reports.

[4]  Andrew Wilson,et al.  Machines, Power and the Ancient Economy* , 2002, Journal of Roman Studies.

[5]  Francesca Pianosi,et al.  A large-scale simulation model to assess karstic groundwater recharge over Europe and the Mediterranean , 2015, Geoscientific Model Development.

[6]  P. Leveau,et al.  Dépôts carbonatés et fonctionnement des aqueducs romains : Le bassin amont du vallon des Arcs sur l'aqueduc d'Arles (Bouches-du-Rhône) , 2005 .

[7]  M. Dubar.  Recherche et interprétation climatique des microcycles du concrétionnement travertineux de l'aqueduc romain de Fréjus (Var, France) , 2006 .

[8]  C. Passchier,et al.  Normal fault displacement dislocating a Roman aqueduct of Ephesos, western Turkey , 2013 .

[9]  Roberto Revelli,et al.  Gravity water wheels as a micro hydropower energy source: A review based on historic data, design methods, efficiencies and modern optimizations , 2018, Renewable and Sustainable Energy Reviews.

[10]  E. Rizzo,et al.  Faulting of the Roman aqueduct of Venafrum (southern Italy): Methods of investigation, results, and seismotectonic implications , 2010 .

[11]  C. L. Sagui.  La meunerie de Barbegal (France) et les roues hydrauliques chez les anciens et au moyen âge , 1948, Isis.

[12]  S. Borensztajn,et al.  Roman Builders Facing the Risk of Disaster: Coupling Archaeological and Geochemical Analyses on a Section of the ‘Aqua Augusta’ (the Roman Serino Aqueduct, Southern Italy) , 2018, Archaeometry.

[13]  Örjan Wikander.  The power and performance of Roman water-mills. Hydro-mechanical analysis of vertical-wheeled water-mills , 2014 .

[14]  O. Scotti,et al.  An archaeo-seismological study of the Nîmes Roman aqueduct, France: indirect evidence for an M > 6 seismic event? , 2009 .

[15]  G. Müller,et al.  Performance characteristics of water wheels , 2004 .

[16]  Kevin Greene,et al.  Technological innovation and economic progress in the ancient world: M. I. Finley re-considered , 2000 .

[17]  W. Cramer,et al.  Climate change: The 2015 Paris Agreement thresholds and Mediterranean basin ecosystems , 2016, Science.

[18]  P. Grootes,et al.  Timing of earthquake ruptures at the Al Harif Roman aqueduct (Dead Sea fault, Syria) from archaeoseismology and paleoseismology , 2010 .

[19]  Vaclav Smil,et al.  World History and Energy , 2004 .

[20]  D. Rigal,et al.  Preuves du nettoyage des concrétions calcaires de l'aqueduc antique de Divonna·Cahors , 2015 .

[21]  Roberto Revelli,et al.  Output power and power losses estimation for an overshot water wheel , 2015 .

[22]  A. Hodge.  Roman aqueducts & water supply , 1992 .

[23]  Örjan Wikander,et al.  Sources of Energy and Exploitation of Power , 2009 .

[24]  Robert Spain.  The power and performance of Roman water-mills : hydro-mechanical analysis of vertical-wheeled water-mills , 2008 .

[25]  Örjan Wikander,et al.  Handbook of ancient water technology , 2000 .

[26]  C. Passchier,et al.  The second century CE Roman watermills of Barbegal: Unraveling the enigma of one of the oldest industrial complexes , 2018, Science Advances.

[27]  C. Bobée,et al.  HIGH‐RESOLUTION (PIXE) ANALYSES OF CARBONATE DEPOSITS IN A ROMAN AQUEDUCT (FRÉJUS, SE FRANCE): IMPLICATIONS FOR THE STUDY OF PALAEOHYDROLOGICAL VARIABILITY AND WATER RESOURCES MANAGEMENT IN SOUTHERN GAUL DURING THE ROMAN PERIOD* , 2011 .

[28]  C. Passchier,et al.  Barbegal: carbonate imprints give a voice to the first industrial complex of Europe , 2019, Journal of Archaeological Science: Reports.

[29]  C. Passchier,et al.  Laminated carbonate deposits in Roman aqueducts: Origin, processes and implications , 2013 .

[30]  Greek and Roman Mechanical Water-lifting Devices , 1984 .

[31]  Philippe Leveau,et al.  Les moulins de Barbegal (1986-2006) , 2007 .

[32]  A. Stohl,et al.  Lead pollution recorded in Greenland ice indicates European emissions tracked plagues, wars, and imperial expansion during antiquity , 2018, Proceedings of the National Academy of Sciences.

[33]  C. Passchier,et al.  The aqueduct of Gerasa – Intra-annual palaeoenvironmental data from Roman Jordan using carbonate deposits , 2020 .

[34]  C. Passchier,et al.  Environmental and depositional controls on laminated freshwater carbonates: An example from the Roman aqueduct of Patara, Turkey , 2013 .

[35]  John Peter Oleson,et al.  Greek and Roman Mechanical Water-Lifting Devices: The History of a Technology , 1984 .