Improving corrosion, antibacterial and biocompatibility properties of MAO-coated AZ31 magnesium alloy by Cu(II)-chitosan/PVA nanofibers post-treatment

[1]  Sen Yu,et al.  Effect of MAO/Ta2O5 composite coating on the corrosion behavior of Mg-Sr alloy and its in vitro biocompatibility , 2022, Journal of Materials Research and Technology.

[2]  R. Zeng,et al.  In vitro degradation and multi-antibacterial mechanisms of β-cyclodextrin@curcumin embodied Mg(OH)2/MAO coating on AZ31 magnesium alloy , 2022, Journal of Materials Science & Technology.

[3]  Chengyou Liu,et al.  In vitro degradation, photo-dynamic and thermal antibacterial activities of Cu-bearing chlorophyllin-induced Ca–P coating on magnesium alloy AZ31 , 2022, Bioactive materials.

[4]  C. Dehghanian,et al.  Incorporation of ZnO–ZrO2 nanoparticles into TiO2 coatings obtained by PEO on Ti–6Al–4V substrate and evaluation of its corrosion behavior, microstructural and antibacterial effects exposed to SBF solution , 2021, Ceramics International.

[5]  Xiang Cai,et al.  Fabrication of a Cu Nanoparticles/Poly(ε-caprolactone)/Gelatin Fiber Membrane with Good Antibacterial Activity and Mechanical Property via Green Electrospinning. , 2021, ACS applied bio materials.

[6]  L. Marin,et al.  Electrospinning of chitosan-based nanofibers: from design to prospective applications , 2021, Reviews in Chemical Engineering.

[7]  S. H. Tabaian,et al.  Microstructural Characterization and Investigation on Corrosion Properties of Mg-Zn-RE-Ca Alloy as a Possible Biomedical Implant , 2021, Metals and Materials International.

[8]  C. Dehghanian,et al.  Silane coatings modified with hydroxyapatite nanoparticles to enhance the biocompatibility and corrosion resistance of a magnesium alloy , 2021, RSC advances.

[9]  S. Sharif,et al.  A Comprehensive Review on Surface Modifications of Biodegradable Magnesium-Based Implant Alloy: Polymer Coatings Opportunities and Challenges , 2021, Coatings.

[10]  Yanbing Zhao,et al.  Advances in layer-by-layer self-assembled coatings upon biodegradable magnesium alloys , 2021, Science China Materials.

[11]  C. Dehghanian,et al.  Preparation of PEO/silane composite coating on AZ31 magnesium alloy and investigation of its properties , 2021 .

[12]  E. Tamjid,et al.  Controlled biodegradation of magnesium alloy in physiological environment by metal organic framework nanocomposite coatings , 2021, Scientific Reports.

[13]  M. Mozafari,et al.  Cerium-doped bioactive glass-loaded chitosan/polyethylene oxide nanofiber with elevated antibacterial properties as a potential wound dressing , 2020 .

[14]  Mohsen Akbari,et al.  Co-incorporation of graphene oxide/silver nanoparticle into poly-L-lactic acid fibrous: A route toward the development of cytocompatible and antibacterial coating layer on magnesium implants. , 2020, Materials science & engineering. C, Materials for biological applications.

[15]  Youjun Zhao,et al.  Corrosion resistance and biocompatibility of calcium-containing coatings developed in near-neutral solutions containing phytic acid and phosphoric acid on AZ31B alloy , 2020, Journal of Alloys and Compounds.

[16]  S. Guan,et al.  Advance in Antibacterial Magnesium Alloys and Surface Coatings on Magnesium Alloys: A Review , 2020, Acta Metallurgica Sinica (English Letters).

[17]  A. Boccaccini,et al.  Electrophoretic Deposition of Copper(II)–Chitosan Complexes for Antibacterial Coatings , 2020, International journal of molecular sciences.

[18]  P. J. Rivero,et al.  Electrospinning: A Powerful Tool to Improve the Corrosion Resistance of Metallic Surfaces Using Nanofibrous Coatings , 2020, Metals.

[19]  Ahmad Fauzi Ismail,et al.  Coating biodegradable magnesium alloys with electrospun poly-L-lactic acid-åkermanite-doxycycline nanofibers for enhanced biocompatibility, antibacterial activity, and corrosion resistance , 2019, Surface and Coatings Technology.

[20]  M. Mahdavian,et al.  Fabrication of a highly protective silane composite coating with limited water uptake utilizing functionalized carbon nano-tubes , 2019, Composites Part B: Engineering.

[21]  Suédina Maria de Lima Silva,et al.  Chitosan/Essential Oils Formulations for Potential Use as Wound Dressing: Physical and Antimicrobial Properties , 2019, Materials.

[22]  M. Aliofkhazraei,et al.  Review of electrochemical properties of hybrid coating systems on Mg with plasma electrolytic oxidation process as pretreatment , 2019, Surfaces and Interfaces.

[23]  Xiangfang Peng,et al.  Electrospinning and crosslinking of polyvinyl alcohol/chitosan composite nanofiber for transdermal drug delivery , 2018 .

[24]  N. Yusof,et al.  Investigation of Corrosion Protection Performance of Multiphase PEO (Mg2SiO4, MgO, MgAl2O4) Coatings on Mg Alloy Formed in Aluminate-Silicate- based Mixture Electrolyte , 2018, Protection of Metals and Physical Chemistry of Surfaces.

[25]  M. Doble,et al.  Electrospun PCL/HA coated friction stir processed AZ31/HA composites for degradable implant applications , 2018 .

[26]  A. Boccaccini,et al.  Incorporation of bioactive glass nanoparticles in electrospun PCL/chitosan fibers by using benign solvents , 2017, Bioactive materials.

[27]  C. Park,et al.  Enhanced corrosion resistance and biocompatibility of AZ31 Mg alloy using PCL/ZnO NPs via electrospinning , 2017 .

[28]  G. Yuan,et al.  Enhanced corrosion resistance and cytocompatibility of biodegradable Mg alloys by introduction of Mg(OH)2 particles into poly (L-lactic acid) coating , 2017, Scientific Reports.

[29]  S. Jurga,et al.  Copper-gold nanoparticles: Fabrication, characteristic and application as drug carriers , 2016 .

[30]  M. Doble,et al.  Tailoring degradation of AZ31 alloy by surface pre-treatment and electrospun PCL fibrous coating. , 2016, Materials science & engineering. C, Materials for biological applications.

[31]  H. Bakhsheshi‐Rad,et al.  Deposition of nanostructured fluorine-doped hydroxyapatite-polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for biomedical applications. , 2016, Materials science & engineering. C, Materials for biological applications.

[32]  F. Marciano,et al.  Influence of low contents of superhydrophilic MWCNT on the properties and cell viability of electrospun poly (butylene adipate-co-terephthalate) fibers. , 2016, Materials science & engineering. C, Materials for biological applications.

[33]  H. Mirzadeh,et al.  Electrospinning, mechanical properties, and cell behavior study of chitosan/PVA nanofibers. , 2015, Journal of biomedical materials research. Part A.

[34]  Cheol-Sang Kim,et al.  Systematic understanding of corrosion behavior of plasma electrolytic oxidation treated AZ31 magnesium alloy using a mouse model of subcutaneous implant. , 2014, Materials science & engineering. C, Materials for biological applications.

[35]  Sabu Thomas,et al.  Electrospun polycaprolactone membranes incorporated with ZnO nanoparticles as skin substitutes with enhanced fibroblast proliferation and wound healing , 2014 .

[36]  E. Guibal,et al.  Metal ion biosorption on chitosan for the synthesis of advanced materials , 2014, Journal of Materials Science.

[37]  P. Opanasopit,et al.  Electrospun chitosan/polyvinyl alcohol nanofibre mats for wound healing , 2014, International wound journal.

[38]  Cheol-Sang Kim,et al.  Electrospun antibacterial polyurethane-cellulose acetate-zein composite mats for wound dressing. , 2014, Carbohydrate polymers.

[39]  Y. Zheng,et al.  Effect of sterilization process on surface characteristics and biocompatibility of pure Mg and MgCa alloys. , 2013, Materials science & engineering. C, Materials for biological applications.

[40]  Nynke H Dekker,et al.  Electron beam fabrication of a microfluidic device for studying submicron-scale bacteria , 2013, Journal of Nanobiotechnology.

[41]  N. Barakat,et al.  Influence of electrospinning and dip-coating techniques on the degradation and cytocompatibility of Mg-based alloy , 2013 .

[42]  P. Guerrero,et al.  Functional properties of chitosan-based films. , 2013, Carbohydrate polymers.

[43]  Changsong Dai,et al.  Study on the bonding strength between calcium phosphate/chitosan composite coatings and a Mg alloy substrate , 2012 .

[44]  N. Rameshbabu,et al.  Effect of various additives on morphology and corrosion behavior of ceramic coatings developed on AZ31 magnesium alloy by plasma electrolytic oxidation , 2012 .

[45]  Hao Li,et al.  The preparation and characterization of chitosan rods modified with Fe3+ by a chelation mechanism. , 2011, Carbohydrate research.

[46]  P. Chu,et al.  In vitro studies of biomedical magnesium alloys in a simulated physiological environment: a review. , 2011, Acta biomaterialia.

[47]  Frank Witte,et al.  The history of biodegradable magnesium implants: a review. , 2010, Acta biomaterialia.

[48]  B. Bouzid,et al.  Chitosan-Copper (II) complex as antibacterial agent: synthesis, characterization and coordinating bond- activity correlation study , 2009 .

[49]  S. A. H. Ravandi,et al.  Electrospinning of chitosan nanofibers: Processing optimization , 2009 .

[50]  Jessica D. Schiffman,et al.  One-step electrospinning of cross-linked chitosan fibers. , 2007, Biomacromolecules.

[51]  G. Cardenas,et al.  FTIR AND TGA STUDIES OF CHITOSAN COMPOSITE FILMS , 2004 .

[52]  Kousaku Ohkawa,et al.  Electrospinning of Chitosan , 2004 .

[53]  Jacques Desbrieres,et al.  Contribution to the study of the complexation of copper by chitosan and oligomers , 2002 .

[54]  F. Mansfeld.  Models for the impedance behavior of protective coatings and cases of localized corrosion , 1993 .

[55]  Yimin Qin.  The chelating properties of chitosan fibers , 1993 .

[56]  W. Goldmann,et al.  Fabrication and characterization of copper(II)-chitosan complexes as antibiotic-free antibacterial biomaterial. , 2018, Carbohydrate polymers.

[57]  Jorge Almodóvar,et al.  Production of chitosan coatings on metal and ceramic biomaterials , 2017 .