Creep-fatigue life assessment of cruciform weldments using the linear matching method

[1]  J. Bree.  Elastic-plastic behaviour of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear-reactor fuel elements , 1967 .

[2]  Jeanine Weekes Schroer,et al.  The Finite String Newsletter Abstracts of Current Literature Glisp User's Manual , 2022 .

[3]  Z. Bažant,et al.  Stress Analysis for Creep , 1983 .

[4]  R. A. Ainsworth,et al.  An Assessment Procedure for the High Temperature Response of Structures , 1991 .

[5]  Haofeng Chen,et al.  A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading , 2001 .

[6]  Haofeng Chen,et al.  A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit , 2001 .

[7]  T. Nguyen-Tajan,et al.  Determination of the stabilized response of a structure undergoing cyclic thermal-mechanical loads by a direct cyclic method , 2003 .

[8]  R. Ainsworth.  R5 procedures for assessing structural integrity of components under creep and creep–fatigue conditions , 2006 .

[9]  Haofeng Chen,et al.  Linear matching method on the evaluation of plastic and creep behaviours for bodies subjected to cyclic thermal and mechanical loading , 2006 .

[10]  Haofeng Chen,et al.  Modeling of the Behavior of a Welded Joint Subjected to Reverse Bending Moment at High Temperature , 2007 .

[11]  R. Skelton,et al.  Creep – fatigue damage accumulation and interaction diagram based on metallographic interpretation of mechanisms , 2008 .

[12]  G. M. Khazhinskii.  Procedure for structural design for long-term cyclic strength , 2009 .

[13]  Yukio Takahashi,et al.  Systematic Evaluation of Creep-Fatigue Life Prediction Methods for Various Alloys , 2013 .

[14]  Haofeng Chen.  Lower and upper bound shakedown analysis of structures with temperature-dependent yield stress , 2009 .

[15]  Haofeng Chen,et al.  A direct method on the evaluation of ratchet limit , 2010 .

[16]  Fan Zhi-Tiao.  Creep-fatigue Lives Prediction and Sensitivity Study of 316H at 550°C , 2011 .

[17]  D. Dean.  Recent developments in the R5 procedures for assessing the high temperature response of structures , 2011 .

[18]  H. Altenbach,et al.  Modelling of high-temperature inelastic behaviour of the austenitic steel AISI type 316 using a continuum damage mechanics approach , 2012 .

[19]  Haofeng Chen,et al.  A Direct Method on the Evaluation of Cyclic Behaviour With Creep Effect , 2012 .

[20]  J. Tao,et al.  Creep Fatigue Crack Initiation Assessment for Weldment Joint Using the Latest R5 Assessment Procedure , 2015 .