Combined Steam–Air Flooding Studies: Experiments, Numerical Simulation, and Field Test in the Qi-40 Block

Air has the characteristics of low-temperature oxidation (LTO) as well as improving drainage energy. Therefore, it can be co-injected with steam to enhance an oil recovery factor. This paper studies combined steam–air flooding for heavy oil recovery. Four experiments, including one steam flooding experiment and three combined steam–air flooding experiments, are studied. The volume ratios of air and steam in these three combined flooding experiments are 1:2, 1:1, and 2:1, respectively. The experimental results show that combined steam–air flooding can enhance the oil recovery factor when the volume ratio of air and steam is in a certain range. Furthermore, numerical simulation results show that its temperature and oil recovery tendency are similar to those from the experiments. In the numerical simulation study, an optimal volume ratio of air and steam is 1.5:2. Finally, a field test of combined steam–air flooding in the Qi-40 block of the Liaohe oil field is studied to validate the experimental and numeri...

[1]  Wenhui Li,et al.  Experimental study and pilot test of urea- and urea-and-foam-assisted steam flooding in heavy oil reservoirs , 2015 .

[2]  H. Bruining,et al.  Recovery of light oil by air injection at medium temperature: Experiments , 2015 .

[3]  Ling Zhu,et al.  A laboratory study of enhancing heavy oil recovery with steam flooding by adding nitrogen foams , 2015 .

[4]  S. Ren,et al.  Low-Temperature Oxidation Characteristics and Its Effect on the Critical Coking Temperature of Heavy Oils , 2015 .

[5]  Longxin Mu,et al.  Mechanism of heavy oil recovery by cyclic superheated steam stimulation , 2013 .

[6]  E. Stenby,et al.  Numerical analysis of a one-dimensional multicomponent model of the in-situ combustion process , 2013 .

[7]  Qicheng Liu,et al.  Parameters Determination during In Situ Combustion of Liaohe Heavy Oil , 2013 .

[8]  A. Kovscek,et al.  An experimental investigation of the in-situ combustion behavior of Karamay crude oil , 2013 .

[9]  Tayfun Babadagli,et al.  Enhancement of the efficiency of in situ combustion technique for heavy-oil recovery by application of nickel ions , 2013 .

[10]  Wan-fen Pu,et al.  Laboratory Investigation on the Feasibility of Light-Oil Autoignition for Application of the High-Pressure Air Injection (HPAI) Process , 2012 .

[11]  Guicai Zhang,et al.  Study of the Factors Influencing Alkaline Flooding in Heavy-Oil Reservoirs , 2012 .

[12]  H. Jia,et al.  Thermal Study on Light Crude Oil for Application of High-Pressure Air Injection (HPAI) Process by TG/DTG and DTA Tests , 2012 .

[13]  R. Idem,et al.  Numerical Simulation of Displacement Mechanisms for Enhancing Heavy Oil Recovery during Alkaline Flooding , 2009 .

[14]  Xiu-Sheng Li,et al.  Mechanistic simulation studies on the steam-foam drive in superviscous oil reservoirs , 2004 .

[15]  Malcolm Greaves,et al.  Air Injection LTO Process: An IOR Technique for Light-Oil Reservoirs , 2002 .

[16]  K. C. Hong,et al.  Effects of steam quality and injection rate on steamflood performance , 1994 .

[17]  J. Ivory,et al.  Investigation Of The Mechanisms Involved In The Steam-Air Injection Process , 1992 .

[18]  F. B. Thomas,et al.  Kinetic Parameters For The High-Temperature Oxidation Of In-Situ Combustion Coke , 1985 .