A comparative study on the influence of epoxy sizings on the mechanical performance of woven carbon fiber-epoxy composites

In the present work the effect of epoxy sizings on the fracture behavior of woven carbon fiber tetrafunctional epoxy composites has been investigated. Three-point flexural, short beam shear (SBS) and Mode-II interlaminar fracture toughness (ENF) tests have been carried out. Wettability and Atomic Force Microscopy (AFM) studies have been performed on commercial sized, desized and 0.7 wt% TGDDM and 0.7 wt% DGEBA sized carbon fibers. Dynamic mechanical thermal analysis and Scanning Electron Microscopy (SEM) studies were also carried out on the different carbon fiber/epoxy composites. The used sizing treatments provided composites with improved mechanical properties due to the enhancement achieved in the fiber-matrix adhesion. Polym. Compos. 25:319–330, 2004. © 2004 Society of Plastics Engineers.

[1]  I. Mondragon,et al.  Characterization of interfacial behaviour in carbon-fibre/cyanate composites , 2002 .

[2]  R. Day,et al.  Toughened carbon/epoxy composites made by using core/shell particles , 2001 .

[3]  M. Rink,et al.  The effects of strain-rate and temperature on the interlaminar fracture toughness of interleaved PEEK/CF composites , 2001 .

[4]  Lee,et al.  Effect of Fiber-Polymer Interactions on Fracture Toughness Behavior of Carbon Fiber-Reinforced Epoxy Matrix Composites. , 2000, Journal of colloid and interface science.

[5]  N. Dilsiz,et al.  Effect of acid–base properties of unsized and sized carbon fibers on fiber/epoxy matrix adhesion ☆ , 2000 .

[6]  J. Jang,et al.  The effect of surface treatment on the performance improvement of carbon fiber/polybenzoxazine composites , 2000 .

[7]  G. M. Wu,et al.  Processing and properties of solution impregnated carbon fiber reinforced polyethersulfone composites , 2000 .

[8]  J. Jang,et al.  The effect of thermoplastic coating on the mechanical properties of woven fabric carbon/epoxy composites , 2000 .

[9]  C. Papaspyrides,et al.  The effect on the mechanical properties of carbon/epoxy composites of polyamide coatings on the fibers , 1999 .

[10]  Y. Mai,et al.  Influence of fibre cross-sectional aspect ratio on mechanical properties of glass-fibre/epoxy composites II. Interlaminar fracture and impact behaviour , 1999 .

[11]  Springer,et al.  Influence of Oxygen Plasma Treatment of PAN-Based Carbon Fibers on Their Electrokinetic and Wetting Properties. , 1999, Journal of colloid and interface science.

[12]  Soojin Park,et al.  Electrochemically Modified PAN Carbon Fibers and Interfacial Adhesion in Epoxy-resin Composites , 1999 .

[13]  Soojin Park,et al.  Roles of Unsaturated Polyester in the Epoxy Matrix System , 1999 .

[14]  B. Y. Park,et al.  A study of the interlaminar fracture toughness of a carbon-fiber/epoxy composite containing surface-modified short kevlar fibers , 1998 .

[15]  H. Wang,et al.  Interlaminar Fracture Toughness of GFRP Influenced by Fiber Surface Treatment , 1998 .

[16]  T. Peijs,et al.  The influence of processing parameters on interphase morphology in polymer composites based on phase-separating thermoplast/epoxy blends , 1998 .

[17]  M. Meshii,et al.  Influence of reinforcing continuous carbon fibers on the viscoelastic properties of the epoxy matrix , 1997 .

[18]  Long-Gui Tang,et al.  A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix , 1997 .

[19]  E. Mäder.  Study of fibre surface treatments for control of interphase properties in composites , 1997 .

[20]  J. Karger‐Kocsis,et al.  Surface energetics of carbon fibers and its effects on the mechanical performance of CF/EP composites , 1996 .

[21]  K. Gotoh,et al.  Wettability and surface free energy of electrolytically oxidized graphite fibers , 1995 .

[22]  P. Tsakiropoulos,et al.  Evaluation of the effect of sizing levels on transverse flexural and shear strengths of carbon/epoxy composites , 1995 .

[23]  G. M. Wu,et al.  Effects of treatment on the surface composition and energy of carbon fibers , 1995 .

[24]  P. Sherwood,et al.  X‐ray photoelectron spectroscopic studies of carbon‐fiber surfaces. 19. Surface chemical changes during electrochemical oxidation in base , 1995 .

[25]  C. Papaspyrides,et al.  Characterization of coatings of poly(hexamethylene adipamide) deposited on carbon fibers by interfacial polymerization techniques , 1995 .

[26]  J. Karger‐Kocsis,et al.  Effects of fiber/matrix adhesion on off-axis mechanical response in carbon-fiber/epoxyresin composites , 1995 .

[27]  Ignace Verpoest,et al.  Interlaminar fracture toughness of CFRP influenced by fibre surface treatment: Part 1. Experimental results , 1995 .

[28]  C. Anderson,et al.  Sizing resin structure and interphase formation in carbon fibre composites , 1994 .

[29]  J. Karger‐Kocsis,et al.  Effects of the interface on the mechanical response of CF/EP microcomposites and macrocomposites , 1994 .

[30]  M. Youan.  Surface acid‐base characteristics of fiber materials by contact angle measurements , 1993 .

[31]  R. Gauvin,et al.  Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials , 1993 .

[32]  D. Blackketter,et al.  Evaluation of fiber surfaces treatment and sizing on the shear and transverse tensile strengths of carbon fiber-reinforced thermoset and thermoplastic matrix composites , 1993 .

[33]  Tse-Hao Ko.  Characterization of PAN-based nonburning (nonflammable) fibers , 1993 .

[34]  K. J. Hüttinger,et al.  Polydimethylsiloxane coated carbon fibres for the production of carbon-fibre reinforced carbon , 1991 .

[35]  J. Hughes.  The carbon fibre/epoxy interface: a review , 1991 .

[36]  K. J. Hüttinger,et al.  Works of adhesion at the carbon fiber-liquid interface determined using a modified wetting technique , 1991 .

[37]  K. Tsutsumi,et al.  Determination of the surface free energy of modified carbon fibers and its relation to the work of adhesion , 1990 .

[38]  O. Ishai,et al.  Interlaminar fracture toughness and toughening of laminated composite materials: a review , 1989 .

[39]  I. Ward,et al.  Influence of surface treatment on adhesion of polyethylene fibres , 1987 .

[40]  Erich Fitzer,et al.  Effect of surface treatment and sizing of c-fibres on the mechanical properties of cfr thermosetting and thermoplastic polymers , 1987 .

[41]  Klaus Friedrich,et al.  Microstructural efficiency and fracture toughness of short fiber/thermoplastic matrix composites , 1985 .

[42]  Aj Russell,et al.  Moisture and Temperature Effects on the Mixed-Mode Delamination Fracture of Unidirectional Graphite/Epoxy , 1985 .

[43]  D. H. Kaelble,et al.  Dispersion-Polar Surface Tension Properties of Organic Solids , 1970 .

[44]  D. K. Owens,et al.  Estimation of the surface free energy of polymers , 1969 .

[45]  E. W. Washburn.  The Dynamics of Capillary Flow , 1921 .