Computational Fluid Dynamics Study of Airflow and Particle Transport in Third to Sixth Generation Human Respiratory Tract

The computational fluid dynamics (CFD) technique is used to simulate airflow and aerosol-particle deposition in human respiratory tract. The three dimensional respiratory tract is extended from third to six generation bronchus based on Weibel model (1963). The computation is performed for laminar flow condition. Discrete phase modeling (DPM) is used to study the two phase flow. The aerosol-particles of three different diameters 1, 5 and 10 μm are considered to obtain the effect of aerosol-particle size on deposition efficiency. The results of velocity contours, aerosol-particle deposition efficiency and aerosol-particle trapping process are determined at different locations of the respiratory tract. It is obtained that deposition efficiency increases with the increase of aerosol-particle size. It is also found that more are deposited at the bifurcation junctions because of the direct inertial impaction at these locations. Computational results are found useful to correlate the medical and engineering aspects.

[1]  A. Paul,et al.  Effects of cartilaginous rings on airflow and particle transport through simplified and realistic models of human upper respiratory tracts , 2013 .

[2]  A. Hickey,et al.  Dry powder inhaler formulation. , 2005, Respiratory care.

[3]  A. Paul,et al.  CFD MODELLING OF AIRFLOW IN HUMAN RESPIRATORY SYSTEM , 2011 .

[4]  H. Radhakrishnan,et al.  CFD modeling of turbulent flow and particle deposition in human lungs , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[5]  Jiyuan Tu,et al.  Micron particle deposition in a tracheobronchial airway model under different breathing conditions. , 2010, Medical engineering & physics.

[6]  Ananth V. Annapragada,et al.  Computational Fluid Dynamics Simulation of Airflow and Aerosol Deposition in Human Lungs , 2004, Annals of Biomedical Engineering.

[7]  Clement Kleinstreuer,et al.  Airflow and Nanoparticle Deposition in a 16-Generation Tracheobronchial Airway Model , 2008, Annals of Biomedical Engineering.

[8]  Clement Kleinstreuer,et al.  Gas–solid two-phase flow in a triple bifurcation lung airway model , 2002 .

[9]  Minrui Fei,et al.  Modeling of the Human Bronchial Tree and Simulation of Internal Airflow: A Review , 2010, LSMS/ICSEE.

[10]  Y. Zhao,et al.  Steady inspiratory flow in a model symmetric bifurcation. , 1994, Journal of biomechanical engineering.

[11]  Y Liu,et al.  Modeling the bifurcating flow in a human lung airway. , 2002, Journal of biomechanics.

[12]  Kenneth R. Lutchen,et al.  CFD Simulation of Aerosol Deposition in an Anatomically Based Human Large–Medium Airway Model , 2009, Annals of Biomedical Engineering.

[13]  S. A. Morsi,et al.  An investigation of particle trajectories in two-phase flow systems , 1972, Journal of Fluid Mechanics.

[14]  X. Xu,et al.  Characteristic of Gas-Solid Two-Phase Flow in the Human Upper Respiratory Tract Model , 2009, 2009 3rd International Conference on Bioinformatics and Biomedical Engineering.

[15]  Clement Kleinstreuer,et al.  Airflow and Particle Transport in the Human Respiratory System , 2010 .