Effects of Ambient Humidity on a Micromachined Silicon Thermal Wind Sensor

The effect of ambient humidity on a micromachined silicon 2-D thermal wind sensor has been investigated. The sensor includes a central heater and four temperature sensors. It measures the flow-induced temperature gradient on the heated surface. Properties of the ambient air, such as density, viscosity, heat conductivity, and specific heat capacity, are theoretically presented to explore their effects on the performance of the sensor at different relative humidity levels. The output of the sensor as a function of wind speed at different relative humidity levels has been measured. It shows that there is a measurable effect at both high relative humidity and temperature. The results presented here provide a valuable reference for the practical applications of the wind sensor.

[1]  Anton F. P. van Putten,et al.  Silicon thermal anemometry : developments and applications , 1996 .

[2]  Ming Qin,et al.  A system-level model for a silicon thermal flow sensor , 2008 .

[3]  Oliver Paul,et al.  Flip-chip packaging for thermal CMOS anemometers , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[4]  Ming Qin,et al.  Flip-Chip Packaging for a Two-Dimensional Thermal Flow Sensor Using a Copper Pillar Bump Technology , 2007, IEEE Sensors Journal.

[5]  Ming Qin,et al.  Fabrication of a Micromachined Two-Dimensional Wind Sensor by Au–Au Wafer Bonding Technology , 2012, Journal of Microelectromechanical Systems.

[6]  Sekwang Park,et al.  The temperature compensation of a thermal flow sensor by changing the slope and the ratio of resistances , 2004 .

[7]  P. Tsilingiris.  Thermophysical and transport properties of humid air at temperature range between 0 and 100 °C , 2008 .

[8]  Jianmin Miao,et al.  High Sensitivity, Miniature, Full 2-D Anemometer Based on MEMS Hot-Film Sensors , 2013, IEEE Sensors Journal.

[9]  Sekwang Park,et al.  Measurement of flow direction and velocity using a micromachined flow sensor , 2004 .

[10]  Sekwang Park,et al.  A circular-type thermal flow direction sensor free from temperature compensation , 2003 .

[11]  O. Brand,et al.  Micromachined thermally based CMOS microsensors , 1998, Proc. IEEE.

[12]  Ming Qin,et al.  Direct Chip Attachment (DCA) Packaging of a 2-D Thermal Flow Sensor , 2007, 2007 8th International Conference on Electronic Packaging Technology.

[13]  G. P. Shen,et al.  An intelligent wind sensor system with auto-zero function , 2009, TRANSDUCERS 2009 - 2009 International Solid-State Sensors, Actuators and Microsystems Conference.

[14]  Nam-Trung Nguyen.  A novel thermal sensor concept for flow direction and flow velocity , 2005, IEEE Sensors Journal.

[15]  Nam-Trung Nguyen,et al.  Micromachined flow sensors—a review , 1997, Flow Measurement and Instrumentation.

[16]  Ming Qin,et al.  A Cross-Type Thermal Wind Sensor With Self-Testing Function , 2010, IEEE Sensors Journal.

[17]  Kofi A. A. Makinwa,et al.  A 50mW CMOS wind sensor with ±4% speed and ±2° direction error , 2011, 2011 IEEE International Solid-State Circuits Conference.

[18]  Walter Lang,et al.  A Temperature Compensation Circuit for Thermal Flow Sensors Operated in Constant-Temperature-Difference Mode , 2010, IEEE Transactions on Instrumentation and Measurement.

[19]  J.H. Huijsing,et al.  A smart CMOS wind sensor , 2002, 2002 IEEE International Solid-State Circuits Conference. Digest of Technical Papers (Cat. No.02CH37315).

[20]  Ming Qin,et al.  Thermal asymmetry compensation of a wind sensor fabricated on ceramic substrate , 2010, 2010 IEEE Sensors.

[21]  Henry Baltes,et al.  Two-dimensional integrated gas flow sensors by CMOS IC technology , 1995 .

[22]  B. W. Oudheusden,et al.  Silicon thermal flow sensor with a two-dimensional direction sensitivity , 1990 .

[23]  Ming Qin,et al.  A FCOB packaged thermal wind sensor with compensation , 2010 .

[24]  Kofi A. A. Makinwa,et al.  Compensation of packaging asymmetry in a 2-D wind sensor , 2002, Proceedings of IEEE Sensors.