Usability of arc types in industrial welding
暂无分享,去创建一个
[1] Paul A. Colegrove,et al. Measuring the process efficiency of controlled gas metal arc welding processes , 2011 .
[2] E. K. Stava. THE SURFACE-TENSION-TRANSFER POWER SOURCE : A NEW, LOW-SPATTER ARC WELDINGMACHINE , 1993 .
[3] Surjya K. Pal,et al. Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding , 2010 .
[4] Pedro Almeida,et al. Innovations in arc welding , 2008 .
[5] N. Murugan,et al. Prediction of Heat-Affected Zone Characteristics in Submerged Arc Welding of Structural Steel Pipes , 2002 .
[6] Paulraj Sathiya,et al. MECHANICAL AND METALLURGICAL INVESTIGATION ON GAS METAL ARC WELDING OF SUPER AUSTENITIC STAINLESS STEEL , 2012 .
[7] Zhijun Chen,et al. International Scientific-Technical and Production Journal , 2010 .
[8] J. D. Dzelnitzki. INCREASING THE DEPOSITION VOLUME OR THE WELDING SPEED? : ADVANTAGES OF HEAVY-DUTY MAG WELDING , 1999 .
[9] Shinichi Tashiro,et al. CFD MODELLING OF ARC WELDING - THE IMPORTANCE OF THE ARC PLASMA , 2009 .
[10] Reiichi Suzuki. State of the art of process control of molten droplet and pool in gas metal arc welding , 2011 .
[11] Dan Gerbec. Minimizing Defects in Submerged Arc Welding , 2009 .
[12] Ding Min,et al. Welding of quenched and tempered steels with high-spin arc narrow gap MAG system , 2011 .
[13] Hyeong-Soon Moon,et al. Multi sensor data fusion for improving performance and reliability of fully automatic welding system , 2006 .
[14] Rosa Maria Mendes Miranda,et al. Optimization procedures for GMAW of bimetal pipes , 2011 .
[15] P. K. Ghosh,et al. Thermal and metal transfer behaviours in pulsed current gas metal arc weld deposition of Al–Mg alloy , 2006 .
[16] Israel Stol,et al. Back to basics : Using a buried gas metal arc for seam welds , 2006 .
[17] Gunnar Bolmsjö,et al. Robotic arc welding – trends and developments for higher autonomy , 2002 .
[18] J. K. Kristensen,et al. Gas metal arc welding of butt joint with varying gap width based on neural networks , 2005 .
[19] YuMing Zhang,et al. Metal Transfer in Double-Electrode Gas Metal Arc Welding , 2007 .
[20] S. Harada,et al. AC pulsed GNAW improves sheet metal joining , 2005 .
[21] M. Lin,et al. Influence of Arc Pressure on Weld Pool Geometry , 2013 .
[22] John Lancaster,et al. The Physics of Welding , 1984 .
[23] James D. Cobine,et al. Analysis of Electrode Phenomena in the High-Current Arc , 1955 .
[24] Paulo José Modenesi,et al. Characterization of GMAW arc instability phenomena related to low oxidation potential shielding gases , 2010 .
[25] YuMing Zhang,et al. Numerical analysis of metal transfer in gas metal arc welding under modified pulsed current conditions , 2004 .
[26] Rosa Maria Mendes Miranda,et al. Analysis of the influence of shielding gas mixtures on the gas metal arc welding metal transfer modes and fume formation rate , 2007 .
[27] Jianping He,et al. Research on Narrow Gap Welding Parameters Optimization , 2009, 2009 International Conference on Measuring Technology and Mechatronics Automation.
[28] Kojima Yuji,et al. Application of Narrow Gap Welding Process with High Speed Rotating Arc to Box Column Joints of Heavy Thick Plates , 2009 .
[29] Iwata Shinji,et al. Practical System to Monitor and Control the Penetration Depth of Welding by Submerged Arc Welding (SAW) with Multiple Electrodes , 2009 .
[30] Hai-Lung Tsai,et al. Impingement of filler droplets and weld pool dynamics during gas metal arc welding process , 2001 .
[31] Mohd. Shoeb,et al. EFFECT OF MIG WELDING INPUT PROCESS PARAMETERS ON WELD BEAD GEOMETRY ON HSLA STEEL , 2013 .
[32] Paul Kah,et al. Process possibility of welding thin aluminium alloys , 2012 .
[33] T. H. North. Advanced Joining Technologies , 1990 .
[34] Chuansong Wu,et al. Numerical analysis of weld pool geometry in globular-transfer gas metal arc welding , 2007 .
[35] M. J. Kang,et al. Spatter Rate Estimation in the Short-Circuit Transfer Region of GMAW , 2003 .
[36] Kevin L. Moore,et al. Gas Metal Arc Welding , 2003 .
[37] F Massetti. New welding techniques for suspension bridges , 2004 .
[38] Klas Weman,et al. Welding Processes Handbook , 2003 .
[39] John N. DuPont,et al. Thermal efficiency of arc welding processes , 1995 .
[40] Danut Iordachescu,et al. Steps toward a new classification of metal transfer in gas metal arc welding , 2008 .
[41] Paul Kah,et al. Modified GMAW Processes: Control of Heat Input , 2013 .
[42] Bruce D. DeRuntz. Assessing the Benefits of Surface Tension Transfer® Welding to Industry , 2003 .
[43] IańM Richardson,et al. The physics of welding, 2nd ed.: Edited by J. F. Lancaster. Pp. 340. Pergamon Press, Oxford. 1986. Hardcover £32.00 ($55.00), Flexicover £16.25 ($28.00) , 1988 .
[44] Jing Wu,et al. Intelligentized Methodology for Arc Welding Dynamical Processes , 2009, Lecture Notes in Electrical Engineering.
[45] J. Tušek,et al. Methods for the determination of arc stability , 2003 .
[46] K. Luksa,et al. Influence of weld imperfection on short circuit GMA welding arc stability , 2006 .
[47] Thomas W. Eagar,et al. Particle size distribution of gas metal and flux cored arc welding fumes , 2005 .
[48] Chunli Yang,et al. Application of rotating arc system to horizontal narrow gap welding , 2009 .
[49] Jolanta Matusiak,et al. Low-energy arc welding with gas shielding – the effect of material and technological conditions on joint quality and the emission of impurities in the workplace , 2011 .
[50] Thomas W. Eagar. The Physics of Arc Welding Processes , 1990 .
[51] D T Swift-Hook,et al. Heat flow to the workpiece from a TIG welding arc , 1973 .
[52] S. Samidas. Welding Science and Technology in India , 2000 .
[53] M. Hermans,et al. Process behavior and stability in short circuit gas metal arc welding , 1999 .
[54] Américo Scotti,et al. A scientific application oriented classification for metal transfer modes in GMA welding , 2012 .
[55] K. Srinivasan,et al. Effect of surface tension metal transfer on fume formation rate during flux-cored arc welding of HSLA steel , 2011 .