Smooth point-to-point trajectory planning for robot manipulators by using radial basis functions

[1]  Antonio Visioli.  Trajectory planning of robot manipulators by using algebraic and trigonometric splines , 2000, Robotica.

[2]  Aurelio Piazzi,et al.  Global minimum-jerk trajectory planning of robot manipulators , 2000, IEEE Trans. Ind. Electron..

[3]  Dan Simon,et al.  A trigonometric trajectory generator for robotic arms , 1993 .

[4]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[5]  Dan Simon,et al.  Optimal trigonometric robot joint trajectories , 1991, Robotica.

[6]  X. Shi,et al.  Multi-objective optimal trajectory planning of manipulators based on quintic NURBS , 2016, 2016 IEEE International Conference on Mechatronics and Automation.

[7]  R. L. Hardy.  Theory and applications of the multiquadric-biharmonic method : 20 years of discovery 1968-1988 , 1990 .

[8]  C. Lin,et al.  Formulation and optimization of cubic polynomial joint trajectories for industrial robots , 1983 .

[9]  Huashan Liu,et al.  Time-optimal and jerk-continuous trajectory planning for robot manipulators with kinematic constraints , 2013 .

[10]  Fares J. Abu-Dakka,et al.  Statistical evaluation of an evolutionary algorithm for minimum time trajectory planning problem for industrial robots , 2017 .

[11]  A. Gasparetto,et al.  A new method for smooth trajectory planning of robot manipulators , 2007 .

[12]  Hsien-I Lin,et al.  A Fast and Unified Method to Find a Minimum-Jerk Robot Joint Trajectory Using Particle Swarm Optimization , 2013, Journal of Intelligent & Robotic Systems.

[13]  A. Gasparetto,et al.  A technique for time-jerk optimal planning of robot trajectories , 2008 .

[14]  Kaiyuan Wu,et al.  Optimal time-jerk trajectory planning for industrial robots , 2018 .

[15]  H. Lehtihet,et al.  Minimum cost trajectory planning for industrial robots , 2004 .

[16]  E. Dyllong,et al.  Local path modifications of heavy load manipulators , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[17]  Pierre-Jean Barre,et al.  Influence of a Jerk Controlled Movement Law on the Vibratory Behaviour of High-Dynamics Systems , 2005, J. Intell. Robotic Syst..

[18]  Tamer Inanc,et al.  An RBF collocation method for solving optimal control problems , 2017, Robotics Auton. Syst..

[19]  Antonio Visioli,et al.  Planning and real-time modifications of a trajectory using spline techniques , 2003, Robotica.

[20]  Yangsheng Xu,et al.  Motion Trajectory Planning of Space Manipulator for Joint Jerk Minimization , 2007, 2007 International Conference on Mechatronics and Automation.

[21]  S. Kazem,et al.  Radial basis functions approach on optimal control problems: a numerical investigation , 2014 .

[22]  Richard Bearee,et al.  Enhanced trajectory planning for machining with industrial six-axis robots , 2010, 2010 IEEE International Conference on Industrial Technology.

[23]  Alessandro Gasparetto,et al.  Experimental Validation of Minimum Time-jerk Algorithms for Industrial Robots , 2011, J. Intell. Robotic Syst..

[24]  R. L. Hardy.  Multiquadric equations of topography and other irregular surfaces , 1971 .

[25]  Mehrdad Yazdani,et al.  A simple control policy for achieving minimum jerk trajectories , 2012, Neural Networks.

[26]  T. Chettibi,et al.  Generation of Point to Point Trajectories for Robotic Manipulators Under Electro-Mechanical Constraints , 2007 .

[27]  G. I. Dodds,et al.  Time-optimal and smooth joint path generation for robot manipulators , 1994 .

[28]  Václav Skala,et al.  RBF Interpolation with CSRBF of Large Data Sets , 2017, ICCS.

[29]  Kostas J. Kyriakopoulos,et al.  Minimum jerk path generation , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.