HEATING UNIFORMITY AND RATES IN A DOMESTIC MICROWAVE COMBINATION OVEN

Physics-based modeling complemented with magnetic resonance imaging (MRI) for validation can provide a novel means to understand and thereby optimize combination heating processes. The objectives of this study were to compare heating patterns in a combination of radiant, forced air and microwave oven measured by MRI with those predicted by coupled electromagnetics-heat transfer model; quantify speed and uniformity of heating for the different combination modes; determine the effect of food dielectric properties on heating patterns; and delineate the nature of individual heating modes and their combinations. The modes of radiant heating through heating elements and forced convection by fan led to a more uniform heating compared with the faster (but less uniform) heating method provided by the microwaves. Combination methods were faster than radiant, forced-air and microwave-only heating. Although the speed of heating increased appreciably for combination modes, the nonuniformity of heating did not increase as much. PRACTICAL APPLICATIONS The results from the study can be used to develop design recommendations/guidelines for combination heating for different thermal processes such as baking, broiling, roasting and reheating of different materials, grouping them based on their properties. The research can benefit the consumers, food services and equipment manufacturers to understand the combination heating process in a better way and to, thereby, use it efficiently. Without a fundamental understanding of the effect of various combinations, optimization of heating can be intractable. The fundamental approach used in this study would, therefore, help consumers and food services in preparation of safe and high-quality foods through combination heating. The work would also help equipment manufacturers in optimizing the designs of combination-heating ovens.

[1]  W. Mcminn,et al.  Microwave–convective drying characteristics of pharmaceutical powders , 2005 .

[2]  Thomas Ohlsson,et al.  Tools for improving the heating uniformity of foods heated in a microwave oven. , 2000 .

[3]  Marialuci Frangipani Almeida,et al.  Modeling Infrared and Combination Infrared-Microwave Heating of Foods in an Oven , 2004 .

[4]  V. M. Puri,et al.  Finite element modeling of heat and mass transfer in food materials during microwave heating — Model development and validation , 1995 .

[5]  A. Datta,et al.  Transport and related properties of breads baked using various heating modes , 2007 .

[6]  C. E. Walker,et al.  Impingement in food processing , 1998 .

[7]  G.S.V. Raghavan,et al.  ANALYSIS OF HEAT AND MASS TRANSFER DURING COMBINED MICROWAVE CONVECTIVE SPOUTED-BED DRYING , 2001 .

[8]  Drying of steamed Asian ginseng (Panax ginseng) roots by microwave-hot air combination. , 2000, Die Pharmazie.

[9]  J. Van Impe,et al.  A Combined Electromagnetic and Heat Transfer Model for Heating of Foods in Microwave Combination Ovens , 2002 .

[10]  Majeda Khraisheh,et al.  Microwave and air drying I. Fundamental considerations and assumptions for the simplified thermal calculations of volumetric power absorption , 1997 .

[11]  Zhu Shou-zheng,et al.  Power Distribution Analysis in Rectangular Microwave Heating Applicator With Startified Load , 1988 .

[12]  Ashim K. Datta,et al.  Heat transfer in a combination microwave–jet impingement oven , 2008 .

[13]  C. E. Walker,et al.  Cake Baking in Conventional, Impingement and Hybrid Ovens , 1996 .

[14]  L. Campañone,et al.  Mathematical analysis of microwave heating process , 2005 .

[15]  Marc Regier,et al.  Microwave heating : A new approach of simulation and validation , 2006 .

[16]  J. Bows,et al.  Three-dimensional MRI mapping of minimum temperatures achieved in microwave and conventional food processing , 2001 .

[17]  A. Schiraldi,et al.  Drying of Agaricus bisporus mushrooms by microwave-hot air combination , 1991 .

[18]  Gulum Sumnu,et al.  Microwave, infrared and infrared-microwave combination baking of cakes , 2005 .

[19]  Charles R. Buffler,et al.  Microwave cooking and processing , 1993 .

[20]  John R. Bows,et al.  Three‐dimensional MRI mapping of microwave induced heating patterns , 1999 .

[21]  Laurance D. Hall,et al.  Validation and cross‐comparison of MRI temperature mapping against fibre optic thermometry for microwave heating of foods , 2005 .

[22]  K. Torrance,et al.  Moisture transport in intensive microwave heating of biomaterials: a multiphase porous media model , 1999 .

[23]  L. Barratt,et al.  Experimental validation of a combined electromagnetic and thermal FDTD model of a microwave heating process , 1995 .

[24]  R. N. Clarke,et al.  The development of food simulants for microwave oven testing , 2004 .

[25]  Ashim K. Datta,et al.  Infrared and hot-air-assisted microwave heating of foods for control of surface moisture , 2002 .

[26]  Nills E. Bengtsson,et al.  Experiments with a Heat Camera for Recording Temperature Distribution in Foods during Microwave Heating , 1969 .

[27]  R. Singh,et al.  Spatial Variation of Convective Heat Transfer Coefficient in Air Impingement Applications , 2003 .

[28]  W. Wiesbeck,et al.  Modeling microwave and hybrid heating processes including heat radiation effects , 2002 .

[29]  Koulis Pericleous,et al.  A new computational approach to microwave heating of two‐phase porous materials , 2004 .

[30]  S. Ohkawa,et al.  Analysis of Power Density Distribution in Microwave Ovens , 1978 .

[31]  A K Datta,et al.  Coupled Electromagnetic and Termal Modeling of Microwave Oven Heating of Foods , 2000, The Journal of microwave power and electromagnetic energy : a publication of the International Microwave Power Institute.