Detection of natural crack in wind turbine gearbox

One of the most challenging scenarios in bearing diagnosis is the extraction of fault signatures from within other strong components which mask the vibration signal. Usually, the bearing vibration signals are dominated by those of other components such as gears and shafts. A good example of this scenario is the wind turbine gearbox which presents one of the most difficult bearing detection tasks. The non-stationary signal analysis is considered one of the main topics in the field of machinery fault diagnosis. In this paper, a set of signal processing techniques has been studied to investigate their feasibility for bearing fault detection in wind turbine gearbox. These techniques include statistical condition indicators, spectral kurtosis, and envelope analysis. The results of vibration analysis showed the possibility of bearing fault detection in wind turbine high-speed shafts using multiple signal processing techniques. However, among these signal processing techniques, spectral kurtosis followed by envelope analysis provides early fault detection compared to the other techniques employed. In addition, outer race bearing fault indicator provides clear indication of the crack severity and progress.

[1]  B. Charnley,et al.  Energy Index technique for detection of Acoustic Emissions associated with incipient bearing failures , 2010 .

[2]  S. Butterfield,et al.  Improving Wind Turbine Gearbox Reliability , 2007 .

[3]  Wenhai Li,et al.  The intelligent fault diagnosis of wind turbine gearbox based on artificial neural network , 2008, 2008 International Conference on Condition Monitoring and Diagnosis.

[4]  Yuh-Tay Sheen,et al.  An envelope analysis based on the resonance modes of the mechanical system for the bearing defect diagnosis , 2010 .

[5]  A. R. Mohanty,et al.  Fault Detection in a Multistage Gearbox by Demodulation of Motor Current Waveform , 2006, IEEE Transactions on Industrial Electronics.

[6]  Francis Quail,et al.  Detailed State of the Art Review for the Different On-Line/In-Line Oil Analysis Techniques in Context of Wind Turbine Gearboxes , 2011 .

[7]  N. Troldborg,et al.  A simple atmospheric boundary layer model applied to large eddy simulations of wind turbine wakes , 2014 .

[8]  Radislav Smid,et al.  Condition Indicators for Gearbox Condition Monitoring Systems , 2005 .

[9]  Mengyan Nie,et al.  Review of condition monitoring and fault diagnosis technologies for wind turbine gearbox , 2013 .

[10]  Wenxian Yang,et al.  Cost-Effective Condition Monitoring for Wind Turbines , 2010, IEEE Transactions on Industrial Electronics.

[11]  Yaoyu Li,et al.  A review of recent advances in wind turbine condition monitoring and fault diagnosis , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[12]  Junda Zhu,et al.  Survey of Condition Indicators for Condition Monitoring Systems (Open Access) , 2014 .

[13]  Yingning Qiu,et al.  Wind turbine condition monitoring: technical and commercial challenges , 2014 .

[14]  Jiong Tang,et al.  Wind Turbine Gearbox Fault Detection Using Multiple Sensors With Features Level Data Fusion , 2012 .

[15]  R. Uma Maheswari,et al.  Trends in non-stationary signal processing techniques applied to vibration analysis of wind turbine drive train – A contemporary survey , 2017 .

[16]  David,et al.  Pitting detection in worm gearboxes with vibration analysis , 2014 .

[17]  David He,et al.  Processing for improved spectral analysis , 2013 .

[18]  Zijun Zhang,et al.  Fault Analysis and Condition Monitoring of the Wind Turbine Gearbox , 2012, IEEE Transactions on Energy Conversion.

[19]  B. Eftekharnejad,et al.  The application of spectral kurtosis on Acoustic Emission and vibrations from a defective bearing , 2011 .

[20]  Christopher Durugbo,et al.  Analysing RMS and peak values of vibration signals for condition monitoring of wind turbine gearboxes , 2016 .

[21]  Robert B. Randall,et al.  Application of spectral kurtosis for detection of a tooth crack in the planetary gear of a wind turbine , 2009 .

[22]  Yi Cao,et al.  Combination of process and vibration data for improved condition monitoring of industrial systems working under variable operating conditions , 2016 .

[23]  Geir Hovland,et al.  A Review on Approaches for Condition Based Maintenance in Applications with Induction Machines Located Offshore , 2012 .

[24]  Tomasz Barszcz,et al.  Application of Artificial Neural Network for Damage Detection in Planetary Gearbox of Wind Turbine , 2016 .

[25]  Andrew Kusiak,et al.  The prediction and diagnosis of wind turbine faults , 2011 .

[26]  M. Elforjani,et al.  Estimation of Remaining Useful Life of Slow Speed Bearings Using Acoustic Emission Signals , 2016 .

[27]  Poonam Bhaskar Sonawane,et al.  Fault Diagnosis of Windmill by FFT Analyzer , 2014 .

[28]  Simon J. Watson,et al.  Physics of Failure approach to wind turbine condition based maintenance , 2009 .

[29]  J. Antoni.  Fast computation of the kurtogram for the detection of transient faults , 2007 .

[30]  David,et al.  Short communicationA comparative study of adaptive filters in detecting a naturally degraded bearing within a gearbox , 2016 .

[31]  Jose Mathew,et al.  Bearing Signature Analysis as a Medium for Fault Detection: A Review , 2008 .

[32]  Xuejun Li,et al.  Multi-Fault Detection of Rolling Element Bearings under Harsh Working Condition Using IMF-Based Adaptive Envelope Order Analysis , 2014, Sensors.

[33]  M. Benbouzid,et al.  EEMD-based wind turbine bearing failure detection using the generator stator current homopolar component , 2013 .