H2SO4/HNO3/HCl—Functionalization and its effect on dispersion of carbon nanotubes in aqueous media

Abstract Chemical functionalization is a procedure used in materials science to oxidize the surface of materials. Several researchers use this technique to improve carbon nanotubes (CNTs) interaction and dispersion. The present article evaluates the effect of different functionalization methodologies on dispersion of CNTs in aqueous media. Sulfuric, nitric and chloridric acids were used on the first functionalization. For the second procedure tested the addition of chloridric acid was eliminated; and the third functionalization was done using only nitric acid. Experimental results obtained by Raman spectroscopy indicated the maintenance of the structure of CNTs after all oxidations. The presence of other structures was proved by thermogravimetry decomposition and the addition of functional groups was confirmed by transform Fourier infrared spectroscopy. From these experimental results, we conclude that all methodologies used showed a percentage of adsorption of functional groups on the CNTs. However, based on dispersion analysis in aqueous media, it is observed that this adsorption showed more efficiency on the first functionalization method, followed by the second method.

[1]  T. Hashida,et al.  Structural characterization and frictional properties of carbon nanotube/alumina composites prepared by precursor method , 2008 .

[2]  R. Kumar,et al.  Immobilization of single walled carbon nanotubes on glass surface , 2008 .

[3]  Jianfeng Shen,et al.  The reinforcement role of different amino-functionalized multi-walled carbon nanotubes in epoxy nanocomposites , 2007 .

[4]  F. Wei,et al.  A new structure for multi-walled carbon nanotubes reinforced alumina nanocomposite with high strength and toughness , 2008 .

[5]  Petra Pötschke,et al.  Dispersion, agglomeration, and network formation of multiwalled carbon nanotubes in polycarbonate melts , 2008 .

[6]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[7]  M. Dresselhaus,et al.  Raman spectroscopy on one isolated carbon nanotube , 2002 .

[8]  W. Choi,et al.  Surface chemical functionalized single-walled carbon nanotube with anchored phenol structures: Physical and chemical characterization , 2007 .

[9]  J. H. Park,et al.  Carbon nanotube composite: Dispersion routes and field emission parameters , 2008 .

[10]  Nanjundan Ashok Kumar,et al.  Preparation of poly 2-hydroxyethyl methacrylate functionalized carbon nanotubes as novel biomaterial nanocomposites , 2008 .

[11]  Yizhe Hu,et al.  Study on amino-functionalized multiwalled carbon nanotubes , 2007 .

[12]  S. Roche,et al.  Understanding carbon nanotubes , 2006 .

[13]  Gao Yun-zhi,et al.  High utilization platinum deposition on single-walled carbon nanotubes as catalysts for direct methanol fuel cell , 2007 .

[14]  Wei Xia,et al.  Surface characterization of oxygen-functionalized multi-walled carbon nanotubes by high-resolution X-ray photoelectron spectroscopy and temperature-programmed desorption , 2007 .

[15]  Tao Zhang,et al.  Carbon nanotube reinforced hydroxyapatite composite coatings produced through laser surface alloying , 2006 .

[16]  Xiao-ru Wang,et al.  Functionalized multiwall carbon nanotubes combined with bis(2,2/-bipyridine)-5-amino-1,10-phenanthroline ruthenium(II) as an electrochemiluminescence sensor , 2008 .

[17]  M. Dresselhaus,et al.  Phonons in carbon nanotubes , 2000 .

[18]  Hiromi Kitano,et al.  Functionalization of single-walled carbon nanotube by the covalent modification with polymer chains. , 2007, Journal of colloid and interface science.

[19]  E. Flahaut,et al.  Catalytic CVD Synthesis of Double and Triple-walled Carbon Nanotubes by the Control of the Catalyst Preparation , 2005 .

[20]  H. Shinohara,et al.  Control of diameter distribution of single-walled carbon nanotubes using the zeolite-CCVD method at atmospheric pressure , 2005 .

[21]  Zhen Zheng,et al.  A facile approach to covalently functionalized carbon nanotubes with biocompatible polymer , 2007 .

[22]  Hiromichi Kataura,et al.  Diameter control of single-walled carbon nanotubes , 2000 .

[23]  Yiu-Wing Mai,et al.  Dispersion and alignment of carbon nanotubes in polymer matrix: A review , 2005 .

[24]  J. Baek,et al.  In situ grafting of carboxylic acid-terminated hyperbranched poly(ether-ketone) to the surface of carbon nanotubes , 2007 .

[25]  S. Ryu,et al.  Physical and chemical characteristics of multiwalled carbon nanotubes functionalized with aminosilane and its influence on the properties of natural rubber composites , 2007 .

[26]  Haojie Song,et al.  Functionalization of carbon nanotubes to improve the tribological properties of poly(furfuryl alcohol) composite coatings , 2008 .

[27]  Hiroshi Shimizu,et al.  Multiwalled carbon nanotubes grafted with polyhedral oligomeric silsesquioxane and its dispersion in poly(l-lactide) matrix , 2008 .