Analysis and Design Validation of Medium Duty Truck Cooling System

[1]  Bing Xu,et al.  Simulation of Class 8 Truck Cooling System: Comparison to Experiment under Different Engine Operation Conditions , 2007 .

[2]  Fongloon Peter Pan,et al.  A Practical Simulation Approach for Truck Cooling System At Early Stage Design Process and Development , 2010 .

[3]  Thomas Hallqvist.  The Cooling Airflow of Heavy Trucks – a Parametric Study , 2008 .

[4]  Liguang Li,et al.  Numerical Simulation and Optimization of the Underhood Fluid Field and Cooling Performance for Heavy Duty Commercial Vehicle under Different Driving Conditions , 2015 .

[5]  Tim Juan.  Investigation and Assessment of Factors Affecting the Underhood Cooling Air Flow Using CFD , 2008 .

[6]  Linfeng Zhang,et al.  Optimization of Aerodynamics and Engine Cooling Performance of a JMC Mid-Size Truck using Simulation , 2010 .

[7]  Lennart Löfdahl,et al.  Cooling Performance Investigation of a Rear Mounted Cooling Package for Heavy Vehicles , 2011 .

[8]  Cenk Dinc,et al.  Improvement of Engine Cooling Performance for a Construction Truck using Numerical and Experimental Methods , 2010 .

[9]  Biswadip Shome,et al.  Design of Experiments Enabled CFD Approach for Optimizing Cooling Fan Performance , 2014 .

[10]  Jeremy Beedy,et al.  Combined Analysis of Cooling Airflow and Aerodynamic Drag for a Class 8 Tractor Trailer Combination , 2011 .

[11]  Lennart Löfdahl,et al.  Comparative Studies between CFD and Wind Tunnel Measurements of Cooling Performance and External Aerodynamics for a Heavy Truck , 2014 .

[12]  A. Gosman,et al.  PREDICTION OF IMPELLER- INDUCED FLOW IN MIXING VESSELS USING MULTIPLE FRAMES OF REFERENCE , 1994 .

[13]  Sunil K. Jain,et al.  Improving Truck Underhood Thermal Management Through CFD , 2002 .

[14]  Ales Alajbegovic,et al.  Under-hood Thermal Simulation of a Class 8 Truck , 2007 .

[15]  Matthew Ellis,et al.  Validation and Design of Heavy Vehicle Cooling System with Waste Heat Recovery Condenser , 2014 .

[16]  Sunil K. Jain,et al.  A multi-dimensional approach to truck underhood thermal management , 2001 .