Nanoplastic removal function and the mechanical nature of colloidal silica slurry polishing

[1]  Michael D. Feit,et al.  Microscopic Removal Function and the Relationship Between Slurry Particle Size Distribution and Workpiece Roughness During Pad Polishing , 2014 .

[2]  M. M. Khruschov.  Principles of abrasive wear , 1974 .

[3]  M. A. Moore.  The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials , 1974 .

[4]  Henry W. Gutsche.  Polishing of Sapphire with Colloidal Silica , 1978 .

[5]  M. J. Cumbo,et al.  Slurry particle size evolution during the polishing of optical glass. , 1995, Applied optics.

[6]  T. Page,et al.  An explanation of the indentation size effect in ceramics , 1989 .

[7]  Tayyab I. Suratwala,et al.  Materials Science and Technology of Optical Fabrication , 2018 .

[8]  J. Lambropoulos,et al.  Loose abrasive lapping hardness of optical glasses and its interpretation. , 1997, Applied optics.

[9]  P. Miller,et al.  Nanoscratching of Optical Glass Surfaces Near the Elastic–Plastic Load Boundary to Mimic the Mechanics of Polishing Particles , 2016 .

[10]  Eyal Feigenbaum,et al.  Influence of partial charge on the material removal rate during chemical polishing , 2018, Journal of the American Ceramic Society.

[11]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[12]  J. Gong,et al.  An energy-balance analysis for the size effect in low-load hardness testing , 2000 .

[13]  Michael D. Feit,et al.  Convergent Pad Polishing of Amorphous Silica , 2012 .

[14]  E. A. Vovk,et al.  Mechanism of the interaction between Al2O3 and SiO2 during the chemical-mechanical polishing of sapphire with silicon dioxide , 2012, Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques.

[15]  Jeffrey A. Hawk,et al.  Laboratory abrasive wear tests : investigation of test methods and alloy correlation , 1999 .

[16]  David Tabor,et al.  The hardness of solids , 1970 .

[17]  S. Jacobs,et al.  Nanoindentation hardness of particles used in magnetorheological finishing (MRF). , 2000, Applied optics.

[18]  Michael D. Feit,et al.  Influence of Temperature and Material Deposit on Material Removal Uniformity during Optical Pad Polishing , 2014 .

[19]  F W Preston,et al.  The structure of abraded glass surfaces , 1922 .

[20]  P. Miller,et al.  Mechanism and Simulation of Removal Rate and Surface Roughness During Optical Polishing of Glasses , 2016 .

[21]  K. Hirao,et al.  Microhardness of SiO2 Glass in Various Environments , 1987 .

[22]  A. Matthews,et al.  On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour , 2000 .

[23]  P. Bush,et al.  A comparison of the wear resistance and hardness of indirect composite resins. , 2001, The Journal of prosthetic dentistry.

[24]  Michael D. Feit,et al.  Toward Deterministic Material Removal and Surface Figure During Fused Silica Pad Polishing , 2010 .

[25]  Steve Bull,et al.  On the origins and mechanisms of the indentation size effect , 2003 .

[26]  Thomas G. Bifano,et al.  Ductile-Regime Grinding Of Brittle Materials: Experimental Results And The Development Of A Model , 1989, Optics & Photonics.

[27]  Huajian Gao,et al.  Indentation size effects in crystalline materials: A law for strain gradient plasticity , 1998 .