DEVELOPMENT OF TECHNICAL POLYMER COMPOSITES FOR AGRICULTURAL ENGINEERING APPLICATION

In the first part of the article, those international publications will be reviewed which will help us in selecting the additives that are worth using in the designated directions of development. In the second half of the article, our own method by which these samples can be selected will be presented. This method will use specific values due to the comparability of individual values. Taking all boundary products into account, an establishment will be made that only four samples are worth further researching for the development of tribology properties.

[1]  Igor Krupa,et al.  Electro-conductive resins filled with graphite for casting applications , 2004 .

[2]  W. Dong,et al.  Flame retardant nanocomposites of polyamide 6/clay/silicone rubber with high toughness and good flowability , 2006 .

[3]  B. M. Lavryshyn,et al.  Effect of Carbon-Containing Conducting Fillers on the Properties of Epoxy Coatings , 2005 .

[4]  Haiyan Xu,et al.  Tribological behavior of the polyamide composite coating filled with different fillers under dry sliding , 2007 .

[5]  P. Pötschke,et al.  Thermoplastic polyurethane filled with carbon nanotubes for electrical dissipative and conductive applications , 2007 .

[6]  Takashi Kashiwagi,et al.  Flame retardant mechanism of polyamide 6–clay nanocomposites ☆ , 2004 .

[7]  G. Rusu,et al.  In situ nylon 6/graphite composites. Physico-mechanical properties , 2007 .

[8]  Jiao Zhixin,et al.  Preparation of expanded graphite with 160 μm mesh of fine flake graphite , 2006 .

[9]  Z. Ishak,et al.  Mechanical, morphological and rheological properties of polyamide 6/organo-montmorillonite nanocomposites , 2007 .

[10]  W. Fan,et al.  Preparation and properties of halogen-free flame-retarded polyamide 6/organoclay nanocomposite , 2004 .

[11]  M. Ostoja-Starzewski,et al.  Friction and scratch resistance of polyamide 6 modified with ionomeric ethylene/methacrylic acid copolymer , 2004 .

[12]  S. Wong,et al.  Electrical and mechanical properties of expanded graphite‐reinforced high‐density polyethylene , 2004 .

[13]  P De Baets,et al.  Design of a tribotester for evaluation of polymer components under static and dynamic sliding conditions , 2007 .

[14]  Charles A. Wilkie,et al.  The effect of clay on the thermal degradation of polyamide 6 in polyamide 6/clay nanocomposites , 2005 .

[15]  P. Baets,et al.  The tribological behaviour of engineering plastics during sliding friction investigated with small-scale specimens , 2002 .