Single-resistance-controlled quadrature oscillator and universal biquad filter using CFOAs

Abstract This paper presents new single-resistance-controlled (SRC) sinusoidal quadrature oscillator and universal biquad filter circuits with reduced number of passive elements using only two current-feedback operational amplifiers (CFOAs). The first proposed oscillator configuration comprising two CFOAs, three resistors and two capacitors provides two sinusoidal voltage outputs in phase quadrature. The circuit has the advantage of independent control of the condition of oscillation and the oscillation frequency through a single resistor. The second proposed biquad filter configuration consisting of only two CFOAs, two resistors and two capacitors realizes all the standard types of the biquadratic filter functions at low-impedance output without any component matching conditions. The filter also provides orthogonal control of the natural angular frequency ( ω 0 ) and the bandwidth (BW). In addition, both proposed circuit configurations have good active and passive sensitivity performances. PSPICE simulations and experimental results based on commercially available AD844-type CFOAs are included, showing the excellent performance of the proposed configurations.

[1]  Raj Senani,et al.  New CFOA-Based Single-Element-Controlled Sinusoidal Oscillators , 2006, IEEE Transactions on Instrumentation and Measurement.

[2]  Muhammad Taher Abuelma'atti,et al.  New universal filter using two current-feedback amplifiers , 1996 .

[3]  C. Aldea,et al.  Grounded resistor controlled sinusoidal oscillator using CFOAs , 1997 .

[4]  S. I. Liu,et al.  New current-feedback amplifier-based universal biquadratic filter , 1995 .

[5]  Shen-Iuan Liu High input impedance filters with low component spread using current-feedback amplifiers , 1995 .

[6]  Vinod Kumar Singh,et al.  Comment: Synthesis of canonic single-resistance-controlled-oscillators using a single current-feedback-amplifier , 1996 .

[7]  Muhammad Taher Abuelma'atti,et al.  Novel RC oscillators using the current-feedback operational amplifier , 1996 .

[8]  Muhammad Taher Abuelma'atti,et al.  A novel low-component-count single-element-controlled sinusoidal oscillator using the CFOA pole , 1996 .

[9]  Muhammad Taher Abuelma'atti,et al.  Novel CFOA-based sinusoidal oscillators , 1997 .

[10]  Chun-Ming Chang,et al.  Voltage-mode notch, lowpass and bandpass filter using current-feedback amplifiers , 1994 .

[11]  Yuh-Shyan Hwang,et al.  Realisation of R-L and C-D impedances using a current feedback amplifier and its applications , 1994 .

[12]  Santiago Celma,et al.  Designing sinusoidal oscillators with current-feedback amplifiers , 1996 .

[13]  Jiann-Horng Tsay,et al.  Single-resistance-controlled sinusoidal oscillator using current-feedback amplifiers , 1996 .

[14]  S. Webb,et al.  Applications of a commercially available current conveyor , 1991 .

[15]  Shen-Iuan Liu Universal filter using two current-feedback amplifiers , 1995 .

[16]  Ahmed M. Soliman Current Feedback Operational Amplifier Based Oscillators , 2000 .

[17]  Raj Senani,et al.  Realization of a Class of Analog Signal Processing / Signal Generation Circuits: Novel Configurations Using Current Feedback Op-Amps , 1998 .

[18]  Alain Fabre Insensitive voltage-mode and current-mode filters from commercially available transimpedance opamps , 1993 .

[19]  Ahmed M. Soliman Applications of the current feedback operational amplifiers , 1996 .