论文信息 - Exhaust Muffler Design and Analysis Using a Boundary Element Method Based Computer Program - 字舞流文

Exhaust Muffler Design and Analysis Using a Boundary Element Method Based Computer Program

C. Y. R. Cheng | T. W. Wu | C. Y. R. Cheng | T. W. Wu | C. Y. R. Cheng | T. W. Wu

[1] Hideo Utsuno,et al. Transfer function method for measuring characteristic impedance and propagation constant of porous materials , 1989 .

[2] W. Soedel,et al. Development of a General Procedure to Formulate Four Pole Parameters by Modal Expansion and Its Application to Three-Dimensional Cavities , 1990 .

[3] W. Soedel,et al. Analysis of gas pulsations in multiply connected three-dimensional acoustic cavities with special attention to natural mode or wave cancellation effects , 1989 .

[4] T. W. Wu. A direct boundary element method for acoustic radiation and scattering from mixed regular and thin bodies , 1995 .

[5] T. W. Wu,et al. Muffler Performance Studies Using a Direct Mixed-Body Boundary Element Method and a Three-Point Method for Evaluating Transmission Loss , 1996 .

[6] Juichi Igarashi,et al. FUNDAMENTALS OF ACOUSTICAL SILENCERS : (I) Theory and experiment of acoustic low-pass filters , 1958 .

[7] W. Soedel,et al. General formulation of four pole parameters for three-dimensional cavities utilizing modal expansion, with special attention to the annular cylinder , 1989 .

[8] J. W. Sullivan. A method for modeling perforated tube muffler components. II. Applications , 1979 .

[9] A. F. Seybert,et al. Experimental determination of acoustic properties using a two‐microphone random‐excitation technique , 1977 .