Biodegradable Mulch Film Made of Starch‐Coated Paper and Its Effectiveness on Temperature and Moisture Content of Soil

Abstract A biodegradable mulch paper (BMP) was made from pea starch and brown kraft paper. Brown kraft paper (KP) was brushed with pregelatinized starch solution on one side evenly at 0.095 kg starch solution per square meter and dried at room temperature for 48–72 h. The BMP, uncoated KP, and commercial plastic weed barrier (WB) had similar thicknesses, from 0.15 to 0.22 mm. However, the tensile strength (TS) of KP was much higher than BMP and WB, whereas the tensile strengths of BMP and WB were similar. The KP had the highest values in elastic modulus (EM), indicating brittleness and rigidity. The WB had the lowest elastic modulus value. Water vapor permeability (WVP) of BMP was lower than that of KP, resulting in 4.57 and 10.28 g mm kPa−1h−1m−2, respectively. Both the BMP and KP could keep the soil more humid than the WB did. Soil temperature under BMP and KP was lower than those of WB and bare soil. The field experiment results also showed that BMP and KP prevented the growth of weeds.

[1]  J. H. Han,et al.  Physical and Mechanical Properties of High-amylose Rice and Pea Starch Films as Affected by Relative Humidity and Plasticizer , 2006 .

[2]  J. H. Han,et al.  Mechanical and Thermal Characteristics of Pea Starch Films Plasticized with Monosaccharides and Polyols , 2006 .

[3]  Zhiqiang Liu Edible films and coatings from starches , 2005 .

[4]  N. Gontard,et al.  Agro-polymers for edible and biodegradable films: Review of agricultural polymeric materials, physical and mechanical characteristics , 2005 .

[5]  J. H. Han,et al.  Film‐forming Characteristics of Starches , 2005 .

[6]  P. Halley,et al.  Developing Biodegradable Mulch Films from Starch-Based Polymers , 2001 .

[7]  P. Gatenholm,et al.  Humidity-induced structural transitions in amylose and amylopectin films , 2001 .

[8]  J. Krochta,et al.  Physical Properties and Oil Absorption of Whey‐Protein‐Coated Paper , 2001 .

[9]  J. Han,et al.  Physical and Mechanical Properties of Pea‐Protein‐based Edible Films , 2001 .

[10]  J. Yliruusi,et al.  Corn Starches as Film Formers in Aqueous-Based Film Coating , 2001, Pharmaceutical development and technology.

[11]  J. H. Han,et al.  WETTING PROPERTIES AND WATER VAPOR PERMEABILITY OF WHEY-PROTEIN-COATED PAPER , 1999 .

[12]  P. Gatenholm,et al.  Structure, mechanical and barrier properties of amylose and amylopectin films , 1998 .

[13]  F. Debeaufort,et al.  Edible films and coatings: tomorrow's packagings: a review. , 1998, Critical reviews in food science and nutrition.

[14]  J. Lawton Effect of starch type on the properties of starch containing films , 1996 .

[15]  N. Gontard,et al.  Prolongation of the Shelf-life of Perishable Food Products using Biodegradable Films and Coatings , 1996 .

[16]  Guy Della Valle,et al.  Influence of amylose content on starch films and foams , 1995 .

[17]  R. Avena-Bustillos,et al.  Hydrophilic Edible Films: Modified Procedure for Water Vapor Permeability and Explanation of Thickness Effects , 1993 .

[18]  B. O. Juliano,et al.  Rice properties and processing , 1985 .

[19]  W. Doane,et al.  Starch-based blown films. 2 , 1980 .

[20]  F. Otey,et al.  Starch-Based Film for Degradable Agricultural Mulch , 1974 .

[21]  H. A. Davis,et al.  Preparation of Films from Amylose , 1951 .