Deposition, properties and applications of PVD CrxN coatings

[1]  J. V. Stebut,et al.  Influence of substrate roughness and lateral spacing on morphology and brittleness of different Cr-C PVD coatings , 1998 .

[2]  A. Zalar,et al.  High-temperature oxidation of TiN/CrN multilayers reactively sputtered at low temperatures , 1998 .

[3]  G. Moulard,et al.  An improved optical cantilever technique using image processing for measuring in situ stress in thin films , 1997 .

[4]  I. Milošev,et al.  Industrial applications of CrN (PVD) coatings, deposited at high and low temperatures , 1997 .

[5]  E. Broszeit,et al.  PVD CrxN coatings for tribological application on piston rings , 1997 .

[6]  C. Berger,et al.  Properties of sputtered hard coatings depending on macro- and micro-geometry of the substrates , 1997 .

[7]  E. Broszeit,et al.  The influence of a heat treatment on the microstructure and mechanical properties of sputtered coatings , 1997 .

[8]  E. Broszeit,et al.  Effect of an annealing process on the tribological properties of sputtered hard coatings , 1997 .

[9]  B. Mishra,et al.  Characterization of hard chromium nitride coatings deposited by cathodic arc vapor deposition , 1996 .

[10]  C. Berger,et al.  Development of chromium nitride coatings substituting titanium nitride , 1996 .

[11]  J. Machet,et al.  Comparative study of mechanical and structural properties of CrN films deposited by d.c. magnetron sputtering and vacuum arc evaporation , 1996 .

[12]  J. Hirvonen,et al.  Chromium nitride coatings produced by ion beam assisted deposition , 1996 .

[13]  G. Berg,et al.  Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion tests , 1995 .

[14]  P. Panjan,et al.  Novel applications of CrN (PVD) coatings deposited at 200 °C , 1995 .

[15]  P. Panjan,et al.  Characterization of low temperature CrN and TiN (PVD) hard coatings , 1995 .

[16]  R. Thom,et al.  Rolling contact fatigue tests of reactively sputtered nitride coatings of Ti, Zr, Hf, Cr, Mo, Ti-Al, Ti-Zr and Ti-Al-V on 440C stainless steel substrates , 1993 .

[17]  A. Matthews,et al.  TiN and CrN PVD coatings on electroless nickel-coated steel substrates , 1993 .

[18]  I. Milošev,et al.  Corrosion properties of selected Cr-based hard and protective coatings , 1993 .

[19]  E. Broszeit,et al.  Influence of substrate material and deposition parameters on the structure, residual stresses, hardness and adhesion of sputtered CrxNy hard coatings , 1993 .

[20]  P. Panjan,et al.  Oxidation resistance of PVD Cr, Cr-N and Cr-N-O hard coatings , 1993 .

[21]  G. N. Pedersen,et al.  Influence of the reactive gas flow on chromium nitride sputtering , 1993 .

[22]  H. Jehn,et al.  Preparation and performance of (Cr, Ti) N coatings deposited by a combined hollow cathode and cathodic arc technique , 1993 .

[23]  E. Broszeit,et al.  Fundamental properties and tribological wear behaviour of sputtered CrCrN coatings on light metals , 1993 .

[24]  Ali Erdemir,et al.  Rolling-contact fatigue and wear resistance of hard coatings on bearing-steel substrates , 1992 .

[25]  R. Arnell.  The mechanics of the tribology of thin film systems , 1990 .

[26]  Herbert S. Cheng,et al.  The influence of coating thickness on lubricated rolling contact fatigue life , 1990 .

[27]  S. Bull,et al.  Compositional, microstructural and morphological effects on the mechanical and tribological properties of chromium nitrogen films , 1990 .