Nano-second pulsed DPSS Nd:YAG laser cutting of CFRP composites with mixed reactive and inert gases

Superior structural capabilities and lightweight of carbon-fibre-reinforced polymer composites have made their applications increasingly noticeable particularly in the aerospace and automotive industries for reduced fuel consumption. Anisotropic and heterogeneous features of these materials, however, have been prohibiting the application of laser cutting on these materials in industrial scale. In the present study the thermal degradation characteristics in laser cutting of these materials are investigated with a nano-second pulsed diode pumped solid state Nd:YAG. A statistical analysis was performed for the optimisation of the process parameters. Furthermore, quality improvement was achieved by the use of low oxygen content assistant gas simultaneously with the inert gas shield. The controlled presence of oxygen as a burning mechanism reduced the fibre pull out up to 55% at the same time with a high processing rate.

[1]  Douglas C. Montgomery,et al.  Response Surface Methodology: Process and Product Optimization Using Designed Experiments , 1995 .

[2]  Lin Li,et al.  Process development of laser machining of carbon fibre reinfoenced plastic composites , 2008 .

[3]  Chris D. Rudd,et al.  Soft ionisation analysis of evolved gas for oxidative decomposition of an epoxy resin/carbon fibre composite , 2007 .

[4]  Tagliaferri,et al.  Cut edge quality of GFRP by pulsed laser: laser-material interaction analysis , 1987 .

[5]  S. Marshall,et al.  The oxidation behaviour of carbon fibres , 1994 .

[6]  M. Ashby,et al.  Engineering Materials 2: An Introduction to Microstructures, Processing and Design , 1986 .

[7]  A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites , 2002 .

[8]  R. Z. Yeh,et al.  Kinetics of Thermal Decomposition of Epoxy Resin in Nitrogen-Oxygen Atmosphere , 1997 .

[9]  V. Tagliaferri,et al.  Maximum cutting speed in laser cutting of fiber reinforced plastics , 1988 .

[10]  A. Jawaid,et al.  Machining of advanced engineering materials using traditional and laser techniques , 1994 .

[11]  Shang-Liang Chen.  The effects of gas composition on the CO2 laser cutting of mild steel , 1998 .

[12]  M. Ashby,et al.  An introduction to microstructures, processing and design , 2000 .

[13]  S. Abrate,et al.  Machining of composite materials. Part I : Traditional methods , 1992 .

[14]  T. Yue,et al.  Theoretical and experimental study on the kerf profile of the laser micro-cutting NiTi shape memory alloy using 355 nm Nd:YAG , 2005 .

[15]  Roberto Teti,et al.  Machining of Composite Materials , 2002 .

[16]  P. Mallick.  Fiber-reinforced composites : materials, manufacturing, and design , 1989 .

[17]  J. Mathew,et al.  Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites , 1999 .

[18]  S. Levchik,et al.  Thermal decomposition, combustion and flame‐retardancy of epoxy resins—a review of the recent literature , 2004 .

[19]  T. Clyne,et al.  Fibre swelling during laser drilling of carbon fibre composites , 2006 .

[20]  A. Di Ilio,et al.  Laser cutting of fibre-reinforced polyesters , 1985 .

[21]  S. Abrate,et al.  Machining of composite materials. Part II: Non-traditional methods , 1992 .

[22]  W. Lau,et al.  Pulsed Nd: YAG Laser Cutting of Carbon Fibre Composite Materials , 1990 .

[23]  F. Bundy.  Pressure-temperature phase diagram of elemental carbon , 1989 .

[24]  W. B. Lee,et al.  Un-conventional machining of composite materials , 1995 .