Using phase change materials in window shutter to reduce the solar heat gain

Abstract A significant amount of the solar heat gain in buildings comes through the windows, and the most effective way to reduce it is to install exterior shading devices, such as window shutters. The window shutters are typically made of foam filled aluminum rolling shutter slat. In this research, a technique of solar heat gain reduction in building through windows using phase change material (PCM) in the shutter instead of foam is investigated using finite element method. The objective of using PCM in the shutters is to utilize its high latent heat of fusion to reduce the heat gain by absorbing the heat gain before it reaches the indoor space. The thermal effectiveness of the proposed PCM shutter system is evaluated by comparing the gain at the indoor space to the heat gain of foam shutter during typical working hours. A parametric study is conducted to assess the effect of different design parameters, such as PCM's type and quantity in the shutter. The result indicates that PCM with the highest examined melting temperature shows the best thermal performance, and the heat gain through windows can be reduced as high as 23.29%.

[1]  Ching-Jenq Ho,et al.  Periodic melting within a square enclosure with an oscillatory surface temperature , 1993 .

[2]  M. Hadjieva,et al.  Composite salt-hydrate concrete system for building energy storage , 2000 .

[3]  S. M. Bajorek,et al.  Experimental Investigation of Natural Convection in Partitioned Enclosures , 1982 .

[4]  J. Szimmat,et al.  Numerical simulation of solidification processes in enclosures , 2002 .

[5]  S. Argyropoulos,et al.  Mathematical modelling of solidification and melting: a review , 1996 .

[6]  Kamal Abdel Radi Ismail,et al.  Comparison between PCM filled glass windows and absorbing gas filled windows , 2008 .

[7]  Hassan E.S. Fath.  Thermal performance of a simple design solar air heater with built-in thermal energy storage system , 1995 .

[8]  Brian G. Thomas,et al.  Fixed grid techniques for phase change problems: A review , 1990 .

[9]  Joseph Andrew Clarke,et al.  Numerical modelling and thermal simulation of PCM–gypsum composites with ESP-r , 2004 .

[10]  Mario A. Medina,et al.  Development of a thermally enhanced frame wall with phase‐change materials for on‐peak air conditioning demand reduction and energy savings in residential buildings , 2005 .

[11]  Uroš Stritih,et al.  Heat transfer enhancement in latent heat thermal storage system for buildings , 2003 .

[12]  K Darkwa,et al.  Simulation of an integrated PCM–wallboard system , 2003 .

[13]  Orhan Aydin,et al.  Conjugate heat transfer analysis of double pane windows , 2006 .

[14]  P. Prinos,et al.  Natural convection in an inclined enclosure , 1997 .

[15]  D. Naylor,et al.  A CFD study of convection in a double glazed window with an enclosed pleated blind , 2009 .

[16]  F. L. Tan,et al.  A numerical study of solidification of n-hexadecane based on the enthalpy formulation , 2002 .

[17]  Abdul-Salam Al-Temeemi.  Climatic design techniques for reducing cooling energy consumption in Kuwaiti houses , 1995 .

[18]  Jaroslav Mackerle,et al.  Finite elements and boundary elements applied in phase change, solidification and melting problems. A bibliography (1996–1998) , 1999 .

[19]  M. Cross,et al.  Accurate solutions of moving boundary problems using the enthalpy method , 1981 .

[20]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[21]  Arun S. Mujumdar,et al.  A finite element model for convection‐dominated melting and solidification problems , 1998 .

[22]  Zhongliang Liu,et al.  Numerical analysis of melting with constant heat flux heating in a thermal energy storage system , 2002 .

[23]  Kamal Abdel Radi Ismail,et al.  Thermally effective windows with moving phase change material curtains , 2001 .

[24]  Kamal Abdel Radi Ismail,et al.  PCM THERMAL INSULATION IN BUILDINGS , 1997 .

[25]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[26]  Y. Çengel.  Heat Transfer: A Practical Approach , 1997 .

[27]  Suresh V. Garimella,et al.  Analysis of Solid–Liquid Phase Change Under Pulsed Heating , 2007 .

[28]  D. Feldman,et al.  Full scale thermal testing of latent heat storage in wallboard , 1996 .

[29]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[30]  Esam M. Alawadhi,et al.  Phase change process with free convection in a circular enclosure: numerical simulations , 2004 .

[31]  S. Alhajraf,et al.  Potential wind power generation in the State of Kuwait , 2005 .