Assessment of Ride Comfort and Braking Performance Using Energy-Harvesting Shock Absorber

[1]  Roman Henze,et al.  Improvement of Heavy Vehicles Ride and Braking Performance via Combined Suspension and Braking Systems Control , 2011 .

[2]  Yoshihiro Suda,et al.  Electro-mechanical suspension system considering energy consumption and vehicle manoeuvre , 2008 .

[3]  Dean Karnopp,et al.  PERMANENT MAGNET LINEAR MOTORS USED AS VARIABLE MECHANICAL DAMPERS FOR VEHICLE SUSPENSIONS , 1989 .

[4]  Honghai Liu,et al.  Reliable Fuzzy Control for Active Suspension Systems With Actuator Delay and Fault , 2012, IEEE Transactions on Fuzzy Systems.

[5]  A. G. Thompson,et al.  An Active Suspension with Optimal Linear State Feedback , 1976 .

[6]  Yoshihiro Suda,et al.  Hybrid Suspension System with Skyhook Control and Energy Regeneration (Development of Self-Powered Active Suspension) , 1998 .

[7]  Gary J. Balas,et al.  Road adaptive active suspension design using linear parameter-varying gain-scheduling , 2002, IEEE Trans. Control. Syst. Technol..

[8]  Seung-Bok Choi,et al.  Integrated control on MR vehicle suspension system associated with braking and steering control , 2011 .

[9]  Lei Zuo,et al.  Energy Harvesting, Ride Comfort, and Road Handling of Regenerative Vehicle Suspensions paper presents a comprehensive assessment of the power that is available for harvest- , 2013 .

[10]  Neil J Mansfield,et al.  Design of digital filters for frequency weightings required for risk assessments of workers exposed to vibration. , 2007, Industrial health.

[11]  Peng Li,et al.  Assessment of Vehicle Performances with Energy-Harvesting Shock Absorbers , 2013 .

[12]  Andrew G. Alleyne.  IMPROVED VEHICLE PERFORMANCE USING COMBINED SUSPENSION AND BRAKING FORCES , 1997 .

[13]  Keum-Shik Hong,et al.  Modified Skyhook Control of Semi-Active Suspensions: A New Model, Gain Scheduling, and Hardware-in-the-Loop Tuning , 2002 .

[14]  Dean Karnopp.  Power Requirements for Vehicle Suspension Systems , 1992 .

[15]  W. Liao,et al.  A self-sensing magnetorheological damper with power generation , 2012 .

[16]  Hans B. Pacejka,et al.  THE MAGIC FORMULA TYRE MODEL , 1991 .

[17]  Rodrigue Tchamna,et al.  Combined control effects of brake and active suspension control on the global safety of a full-car nonlinear model , 2014 .

[18]  Johannes J. H. Paulides,et al.  Efficiency of a Regenerative Direct-Drive Electromagnetic Active Suspension , 2010, IEEE Transactions on Vehicular Technology.

[19]  Lei Zuo,et al.  Electromagnetic Energy-Harvesting Shock Absorbers: Design, Modeling, and Road Tests , 2013, IEEE Transactions on Vehicular Technology.

[20]  Ping Hsu.  Power recovery property of electrical active suspension systems , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[21]  Mina M.S. Kaldas,et al.  Influence of Active Suspension Preview Control on Vehicle Ride and Braking Performance , 2014 .

[22]  L. Zuo,et al.  Energy-harvesting shock absorber with a mechanical motion rectifier , 2013 .

[23]  L. Zuo,et al.  Low order continuous-time filters for approximation of the ISO 2631-1 human vibration sensitivity weightings , 2003 .