Model based reconstruction of milled surface topography from measured cutting forces

[1]  Stephen P. Timoshenko,et al.  Vibration problems in engineering , 1928 .

[2]  S. A. Tobias.  Machine-tool vibration , 1965 .

[3]  R. D. Henshell,et al.  A Timoshenko beam element , 1972 .

[4]  Mark Richardson,et al.  PARAMETER ESTIMATION FROM FREQUENCY RESPONSE MEASUREMENTS USING RATIONAL FRACTION POLYNOMIALS (TWENTY YEARS OF PROGRESS) , 1982 .

[5]  Richard E. DeVor,et al.  The prediction of cutting forces in end milling with application to cornering cuts , 1982 .

[6]  Takashi Yokoyama,et al.  Vibrations of a hanging Timoshenko beam under gravity , 1990 .

[7]  David J. Ewins,et al.  Modal Testing: Theory, Practice, And Application , 2000 .

[8]  Yusuf Altintas,et al.  Mechanics and dynamics of general milling cutters.: Part I: helical end mills , 2001 .

[9]  Gábor Stépán,et al.  Semi‐discretization method for delayed systems , 2002 .

[10]  Gábor Stépán,et al.  Stability of up-milling and down-milling, part 1: alternative analytical methods , 2003 .

[11]  B. Mann,et al.  Stability of Interrupted Cutting by Temporal Finite Element Analysis , 2003 .

[12]  Yusuf Altintas,et al.  Multi frequency solution of chatter stability for low immersion milling , 2004 .

[13]  René Mayer,et al.  Surface shape prediction in high speed milling , 2004 .

[14]  Tony L. Schmitz,et al.  Three-Component Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction , 2005 .

[15]  Philippe Dépincé,et al.  Active integration of tool deflection effects in end milling. Part 1. Prediction of milled surfaces , 2006 .

[16]  T. Insperger,et al.  Analysis of the Influence of Mill Helix Angle on Chatter Stability , 2006 .

[17]  Tobias Surmann,et al.  Simulation of milling tool vibration trajectories along changing engagement conditions , 2007 .

[18]  Klaus Weinert,et al.  The effect of runout on the milling tool vibration and surface quality , 2007, Prod. Eng..

[19]  Peter Eberhard,et al.  Improving the computational efficiency and accuracy of the semi-discretization method for periodic delay-differential equations , 2008 .

[20]  Zoltan Dombovari,et al.  Chatter stability of milling in frequency and discrete time domain , 2008 .

[21]  Gábor Stépán,et al.  SURFACE PROPERTIES OF THE MACHINED WORKPIECE FOR HELICAL MILLS , 2009 .

[22]  Chinedum E. Okwudire,et al.  Hybrid Modeling of Ball Screw Drives With Coupled Axial, Torsional, and Lateral Dynamics , 2009 .

[23]  Gábor Stépán,et al.  Semi-Discretization for Time-Delay Systems: Stability and Engineering Applications , 2011 .

[24]  Alex Iglesias,et al.  Prediction of multiple dominant chatter frequencies in milling processes , 2011 .