“Structured”, “Textured” or “Engineered” Surfaces

Fine scale, periodic structures offer designers additional freedom to create novel functions or combinations of functions. This emerging field of “structured” surfaces is poorly defined. This paper attempts to define “structured” surfaces, and then to provide examples of such surfaces for a variety of applications. Manufacturing and metrology are also discussed

[1]  M. Postek.  CRITICAL ISSUES IN SCANNING ELECTRON MICROSCOPE METROLOGY , 1994 .

[2]  E. L. Church,et al.  The measurement of surface texture and topography by differential light scattering , 1979 .

[3]  M. Heckele,et al.  Hot embossing and injection molding for micro-optical components , 1997, Optics & Photonics.

[4]  Theodore V. Vorburger,et al.  Sinusoidal profile precision roughness specimens , 1982 .

[5]  David J. Whitehouse.  Comparison Between Stylus and Optical Methods for Measuring Surfaces , 1988 .

[6]  P. M. Lonardo,et al.  Progress in 3D Surface Microtopography Characterization , 1996 .

[7]  G E Sommargren,et al.  Harmonic diffractive lenses. , 1995, Applied optics.

[8]  Th. Schaller,et al.  Mechanical micromachining for mold insert fabrication and replication , 1999 .

[9]  Theodore V. Vorburger,et al.  Light Scattering from Manufactured Surfaces † †Contribution of the U.S. National Bureau of Standards, not subject to copyright. , 1981 .

[10]  N. Borrelli,et al.  Photolytic technique for producing microlenses in photosensitive glass. , 1985, Applied optics.

[11]  Chris Evans,et al.  Precision engineering : an evolutionary view , 1989 .

[12]  Enrique Tajahuerce,et al.  Wavelength Compensation of Broadband Light Diffraction , 1998 .

[13]  Volker Wittwer,et al.  Microstructured tungsten surfaces as selective emitters , 1999 .

[14]  M. Stedman.  Basis for comparing the performance of surface-measuring machines , 1987 .

[15]  T Okamoto,et al.  Ultraviolet-cured polymer microlens arrays. , 1999, Applied optics.

[16]  H. K. Tönshoff,et al.  Surface Modification of Ceramics by Laser Machining , 1998 .

[17]  John Steven Anderson,et al.  Imaging by diffraction: grating design and hardware results , 1993, Optics + Photonics.

[18]  Jun-Feng Song,et al.  NIST virtual/physical random-profile roughness calibration standards , 1998, Optics & Photonics.

[19]  Toshimichi Moriwaki,et al.  Ultraprecision Metal Cutting — The Past, the Present and the Future , 1991 .

[20]  F W Preston.  The nature of the polishing operation , 1926 .

[21]  G. M. Morris,et al.  Antireflection structured surfaces for the infrared spectral region. , 1993, Applied optics.

[22]  E. Kley,et al.  Fabrication of microprisms for planar optical interconnections by use of analog gray-scale lithography with high-energy-beam-sensitive glass. , 1999, Applied optics.

[23]  Volker Wittwer,et al.  Antireflective submicrometer surface-relief gratings for solar applications , 1998 .

[24]  E. C. Teague,et al.  Three-dimensional stylus profilometry☆ , 1982 .

[25]  Walter Bacher,et al.  Hot embossing - The molding technique for plastic microstructures , 1998 .

[26]  Samuel N. Jones,et al.  Interlaboratory Study on the Lithographically Produced Scanning Electron Microscope Magnification Standard Prototype , 1993, Journal of research of the National Institute of Standards and Technology.

[27]  L. Hakelius,et al.  Tendency to capsular contracture around smooth and textured gel-filled silicone mammary implants : A 5-year follow-up , 1997 .

[28]  Hans Kurt Tönshoff,et al.  Three-Dimensional Micromachining by Machine Tools , 1997 .

[29]  Theodore V. Vorburger,et al.  Key-Note-PapersLight Scattering from Manufactured Surfaces† , 1981 .

[30]  H. Herzig.  Micro-Optics : Elements, Systems And Applications , 1997 .

[31]  G. Connell,et al.  Technique for monolithic fabrication of microlens arrays. , 1988, Applied optics.

[32]  M. Hutley,et al.  Reduction of Lens Reflexion by the “Moth Eye” Principle , 1973, Nature.

[33]  T. R. Thomas,et al.  Trends in surface roughness , 1998 .

[34]  E. Loewen,et al.  Diffraction Gratings and Applications , 2018 .

[35]  Everhardus Albertus Muijderman,et al.  SPIRAL GROOVE BEARINGS , 1965 .

[36]  David J. Whitehouse,et al.  Handbook of Surface Metrology , 2023 .

[37]  Shoji Suzuki,et al.  LOW STICTION/LOW GLIDE HEIGHT HEAD-DISK INTERFACE FOR HIGH-PERFORMANCE DISK DRIVES (INVITED) , 1999 .

[38]  K Schindhelm,et al.  A novel textured surface for blood-contact. , 1999, Biomaterials.

[39]  George L. Clark,et al.  The Encyclopedia of Spectroscopy , 1962 .

[40]  Hans Peter Herzig.  Design of Refractive and Diffractive Micro-Optics , 1997 .

[41]  J N Mait,et al.  Diffractive optics and micro-optics: introduction to the feature issue. , 1999, Applied optics.

[42]  Christopher J. Evans,et al.  Chemical aspects of tool wear in single point diamond turning , 1996 .

[43]  Robert E. Parks,et al.  Rapidly Renewable Lap: Theory and Practice , 1998 .

[44]  Theodore V. Vorburger,et al.  Industrial Uses of STM and AFM * * Contribution of the National Institute of Standards and Technolog , 1997 .

[45]  M. Stedman.  Metrological Evaluation Of Grazing Incidence Mirrors , 1982, Other Conferences.

[46]  Hans Joachim Quenzer,et al.  Fabrication of microrelief surfaces using a one-step lithography process , 1997, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[47]  James E. Potzick,et al.  Method to characterize overlay tool misalignments and distortions , 1997, Advanced Lithography.

[48]  J. I. Llorente,et al.  Reuse of Control Software for Manufacturing Systems , 1997 .