In this work, a miniature sensor for carbon dioxide is presented. Until now, limiting factors for the implementation of gas sensors in smartphones include their production costs, large size and the comparatively poor sensitivity. A small-scale sensor for carbon dioxide suitable for integration in a smartphone is introduced that overcomes these constraints. The sensor components are low-cost, low-power consuming only. As light source a mid-infrared LED is employed and to gauge the light intensity a photoacoustic detector consisting of a commercially available microphone inside a hermetically sealed carbon dioxide cell is used. To save space and minimize intensity losses, a novel waveguide is used to direct the LED radiation to the detector. The waveguide simultaneously forms the measuring chamber. At the same time, because of the high sensitivity of our detector, the overall size can be reduced to a level where it is compatible with standard IC sockets. Gas measurements were performed that emphasize the suitability of the sensor. While providing high sensitivity, the influence of cross-sensitivities to humidity are insignificant and influences due to temperature shifts may be compensated for.
[1]
Jung-Yoon Kim,et al.
ISSAQ: An Integrated Sensing Systems for Real-Time Indoor Air Quality Monitoring
,
2014,
IEEE Sensors Journal.
[2]
Jean-Louis Ouvrier-Buffet,et al.
Low power CO2 NDIR sensing using a micro-bolometer detector and a micro-hotplate IR-source
,
2013
.
[3]
Julian W. Gardner,et al.
A low cost MEMS based NDIR system for the monitoring of carbon dioxide in breath analysis at ppm levels
,
2016
.
[4]
Vedran Bilas,et al.
Empowering smartphone users with sensor node for air quality measurement
,
2013
.
[5]
Daqiang Zhang,et al.
A Survey on Gas Sensing Technology
,
2012,
Sensors.