Deep drawing of square cups with magnesium alloy AZ31 sheets

The square cup drawing of magnesium alloy AZ31 (aluminum 3%, zinc 1%) sheets was studied by both the experimental approach and the finite element analysis. The mechanical properties of AZ31 sheets at various forming temperatures were first obtained from the tensile tests and the forming limit tests. The test results indicate that AZ31 sheets exhibit poor formability at room temperature, but the formability could be improved significantly at elevated temperatures up to 200 °C. The test results were then employed in the finite element simulations to investigate the effects of process parameters, such as punch and die corner radii, and forming temperature, on the formability of square cup drawing with AZ31 sheets. In order to validate the finite element analysis, the deep drawing of square cups of AZ31 sheets at elevated temperatures was also performed. The experimental data show a good agreement with the simulation results, and the optimal forming temperature, punch radius and die corner radius were then determined for the square cup drawing of AZ31 sheets.