Mobilized strength components of Athabasca oil sand in triaxial compression

Dense uncemented Athabasca oil sand specimens exhibit unusually high peak strength, dilation with severe softening, and residual strength in drained triaxial compression tests. Computer tomography scanning, X-ray imaging, and scanning electron microscopy techniques are used to examine the microstructural features of the sheared specimens, such as interlocked structure, shear-banding pattern, and porosity distributions inside and outside shear bands. The characteristics of these microstructural features are used to explain the macrodeformation responses observed in the triaxial compression tests. Mobilization of strength components derived from interlocked structure, dilation, rolling, and critical state are analyzed for pre-peak, post-peak softening, and residual states.Key words: oil sand, interlocked structure, shear dilation, shear band, critical state.

[1]  Michael R. Horne,et al.  The behaviour of an assembly of rotund, rigid, cohesionless particles. I , 1965, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[2]  R. Chambon,et al.  Void ratio evolution inside shear bands in triaxial sand specimens studied by computed tomography , 1996 .

[3]  A. Schofield,et al.  Critical State Soil Mechanics , 1968 .

[4]  I. Vardoulakis,et al.  The thickness of shear bands in granular materials , 1987 .

[5]  Z. T. Bieniawski,et al.  Suggested methods for determining the uniaxial compressive strength and deformability of rock materials: Part 1. Suggested method for determination of the uniaxial compressive strength of rock materials , 1979 .

[6]  T. Kagawa,et al.  Microscopic Measurement of Sand Fabric from Cyclic Tests Causing Liquefaction , 1991 .

[7]  N. Morgenstern,et al.  Shear strength and stress-strain behaviour of Athabasca oil sand at elevated temperatures and pressures , 1987 .

[8]  M. Dusseault,et al.  Shear strength of Athabasca Oil Sands , 1978 .

[9]  P. W. Rowe.  The stress-dilatancy relation for static equilibrium of an assembly of particles in contact , 1962, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[10]  David Muir Wood,et al.  Experimental observations of shear band patterns in direct shear tests , 1982 .

[11]  Jacques Desrues,et al.  Localization of the deformation in tests on sand sample , 1985 .

[12]  Andrew Drescher,et al.  SHEAR BANDS IN BIAXIAL TESTS ON DRY COARSE SAND , 1993 .

[13]  J. David Frost,et al.  UNIFORMITY EVALUATION OF COHESIONLESS SPECIMENS USING DIGITAL IMAGE ANALYSIS , 1996 .

[14]  N. R. Morgenstern,et al.  GEOTECHNICAL ENGINEERING BEYOND SOIL MECHANICS--A CASE STUDY (TWENTY-FIFTH ANNIVERSARY SPECIAL PAPER) , 1988 .

[15]  L. Dobereiner,et al.  GEOTECHNICAL PROPERTIES OF WEAK SANDSTONES , 1986 .

[16]  K. Roscoe.  THE INFLUENCE OF STRAINS IN SOIL MECHANICS , 1970 .