An innovative tomographic technique integrated with acoustic-laser approach for detecting defects in tree trunk

Abstract In this study, we develop a tomographic technique based on the use of both mechanical wave (i.e. stress wave and acoustic wave) and electromagnetic wave (i.e. laser beam) for evaluating the defects in tree trunk. In the experimental work, the tomographic technique was used to inspect tree trunk with an air hole fabricated at the centric position and air gaps made at 5–50 mm near from surface. The result indicates that the internal air hole and the air gap located within 5–20 mm below the tree surface can be effectively detected and quantified. Compared to the results from conventional sonic tomography, our tomographic technique can achieve a more accurate and reliable detection of internal defect in tree system, especially if the internal defects are close to the free surface (i.e. critical defects associated with bending failure).

[1]  Liang Zeng,et al.  Interference resisting design for guided wave tomography , 2013 .

[2]  Jun Liu,et al.  Permeation Properties and Pore Structure of Surface Layer of Fly Ash Concrete , 2014, Materials.

[3]  Qiwen Qiu,et al.  A review of nondestructive testing approaches using mechanical and electromagnetic waves , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  R. Bruce Allison,et al.  Decay Detection in Red Oak Trees Using a Combination of Visual Inspection, Acoustic Testing, and Resistance Microdrilling , 2008, Arboriculture & Urban Forestry.

[5]  Isabelle Debled-Rennesson,et al.  Automatic knot detection and measurements from X-ray CT images of wood: A review and validation of an improved algorithm on softwood samples , 2012 .

[6]  Na Wang,et al.  Application of an ultrasonic wave propagation field in the quantitative identification of cavity defect of log disc , 2014 .

[7]  Josh H. M. Lam,et al.  Health assessment of tree trunk by using acoustic-laser technique and sonic tomography , 2018, Wood Science and Technology.

[8]  Paul R. Weckler,et al.  Microwave backscatter response of pecan tree canopy samples for estimation of pecan yield in situ using terrestrial radar , 2013 .

[9]  Guobing Song,et al.  A fault-location method for VSC-HVDC transmission lines based on natural frequency of current , 2014 .

[10]  Takumi Mitsutani,et al.  Nondestructive tree-ring measurements for Japanese oak and Japanese beech using micro-focus X-ray computed tomography , 2007 .

[11]  Qiwen Qiu,et al.  Use of laser reflection technique for defect detection in CFRP-concrete systems , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[12]  Qiwen Qiu,et al.  Experimental evaluation on the effectiveness of acoustic-laser technique towards the FRP-bonded concrete system , 2015, Smart Structures.

[13]  Qiwen Qiu,et al.  The Sensitivity of Acoustic-Laser Technique for Detecting the Defects in CFRP-Bonded Concrete Systems , 2016 .

[14]  Cheuk Lun Chow,et al.  Long term performance and fire safety aspect of FRP composites used in building structures , 2016 .

[15]  Hailin Feng,et al.  Review of the use of air-coupled ultrasonic technologies for nondestructive testing of wood and wood products , 2017, Comput. Electron. Agric..

[16]  George D. C. Cavalcanti,et al.  Inline discrete tomography system: Application to agricultural product inspection , 2017, Comput. Electron. Agric..

[17]  R. Sanz,et al.  A review of methods and applications of the geometric characterization of tree crops in agricultural activities , 2012 .

[18]  Qiwen Qiu,et al.  Understanding the effect of temperature on the interfacial behavior of CFRP-wood composite via molecular dynamics simulations , 2017 .

[19]  Oral Büyüköztürk,et al.  Operational and defect parameters concerning the acoustic-laser vibrometry method for FRP-reinforced concrete , 2015 .

[20]  Qiwen Qiu,et al.  Measurement of structural vibration by using optic-electronic sensor , 2018 .

[21]  Joseph L. Rose,et al.  Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network: I. Defect detection, localization and growth monitoring , 2007 .

[22]  Zhongxing Geng,et al.  The algorithm of interpolating windowed FFT for harmonic analysis of electric power system , 2001 .

[23]  Seyed Mahmoud Hosseini.  Application of a Hybrid Mesh-free Method Based on Generalized Finite Difference (GFD) Method for Natural Frequency Analysis of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes , 2013 .

[24]  Dodi Nandika,et al.  Evaluation of incense-resinous wood formation in agarwood (Aquilaria malaccensis Lam.) using sonic tomography , 2017 .

[25]  Hailin Feng,et al.  Stress Wave Tomography of Wood Internal Defects using Ellipse-Based Spatial Interpolation and Velocity Compensation , 2015 .

[26]  Jun Liu,et al.  Understanding the interacted mechanism between carbonation and chloride aerosol attack in ordinary Portland cement concrete , 2017 .

[27]  Richard K. Leach,et al.  X-ray computed tomography for additive manufacturing: a review , 2016 .

[28]  Qiwen Qiu,et al.  A novel approach for near-surface defect detection in FRP-bonded concrete systems using laser reflection and acoustic-laser techniques , 2017 .

[29]  Robert J. Ross,et al.  Analysis of wave velocity patterns in black cherry trees and its effect on internal decay detection , 2014 .