Effect of organoclay structure and mixing protocol on the toughening of amorphous polyamide/elastomer blends

[1]  D. R. Paul,et al.  Morphology and Mechanical Properties of Rubber Toughened Amorphous Polyamide/MMT Nanocomposites , 2010 .

[2]  C. Bucknall,et al.  Notched impact behavior of polymer blends: Part 1: New model for particle size dependence , 2009 .

[3]  J. Bara,et al.  Polyamide- and polycarbonate-based nanocomposites prepared from thermally stable imidazolium organoclay , 2009 .

[4]  D. R. Paul,et al.  Effect of organoclay structure on morphology and properties of nanocomposites based on an amorphous polyamide , 2008 .

[5]  Do Hoon Kim,et al.  Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part II: Thermal expansion behavior , 2008 .

[6]  Emmanuel P. Giannelis,et al.  Compatibilizing Poly(vinylidene fluoride)/Nylon-6 Blends with Nanoclay , 2007 .

[7]  Do Hoon Kim,et al.  Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part I: Morphology and mechanical properties , 2007 .

[8]  I. Kelnar,et al.  Effect of clay treatment on structure and mechanical behavior of elastomer-containing polyamide 6 nanocomposite , 2007 .

[9]  Do Hoon Kim,et al.  Structure and properties of polypropylene-based nanocomposites: Effect of PP-g-MA to organoclay ratio , 2007 .

[10]  D. García-López,et al.  Study of melt compounding conditions and characterization of polyamide 6/metallocene ethylene-polypropylene-diene copolymer/maleated ethylene-polypropylene-diene copolymer blends reinforced with layered silicates , 2007 .

[11]  Q. Fu,et al.  Effects of clay on phase morphology and mechanical properties in polyamide 6/EPDM-g-MA/organoclay ternary nanocomposites , 2007 .

[12]  D. R. Paul,et al.  Properties and morphology of nanocomposites based on styrenic polymers, Part II: Effects of maleic anhydride units , 2006 .

[13]  D. R. Paul,et al.  Properties and morphology of nanocomposites based on styrenic polymers. Part I: Styrene-acrylonitrile copolymers , 2006 .

[14]  J. Eguiazábal,et al.  Nanocomposites based on a polyamide 6/maleated styrene–butylene-co-ethylene–styrene blend: Effects of clay loading on morphology and mechanical properties , 2006 .

[15]  Minho Lee,et al.  Effect of clay on the morphology and properties of PMMA/poly(styrene-co-acrylonitrile)/clay nanocomposites prepared by melt mixing , 2006 .

[16]  Joung-Sook Hong,et al.  The role of organically modified layered silicate in the breakup and coalescence of droplets in PBT/PE blends , 2006 .

[17]  D. R. Paul,et al.  TPO based nanocomposites. Part 2. Thermal expansion behavior , 2006 .

[18]  D. R. Paul,et al.  Rubber toughening of nylon 6 nanocomposites , 2006 .

[19]  E. Ingolič,et al.  Rheology/morphology interactions in polypropylene/polyamide-6 nanocomposites , 2006 .

[20]  Jijun Huang,et al.  Comparison of the toughening behavior of nylon 6 versus an amorphous polyamide using various maleated elastomers , 2006 .

[21]  Jijun Huang,et al.  Elastomer particle morphology in ternary blends of maleated and non-maleated ethylene-based elastomers with polyamides: Role of elastomer phase miscibility , 2006 .

[22]  J. Eguiazábal,et al.  Compatibilization level effects on the structure and mechanical properties of rubber‐modified polyamide‐6/clay nanocomposites , 2005 .

[23]  S. Jana,et al.  Nanoclay-induced morphology development in chaotic mixing of immiscible polymers , 2005 .

[24]  W. Cai,et al.  Fabrication of the periodic nanopillar arrays by heat-induced deformation of 2D polymer colloidal monolayer , 2005 .

[25]  M. Bousmina,et al.  Poly(butylene sucinate-co-adipate)/montmorillonite nanocomposites: effect of organic modifier miscibility on structure, properties, and viscoelasticity , 2005 .

[26]  Donald R Paul,et al.  TPO based nanocomposites. Part 1. Morphology and mechanical properties , 2005 .

[27]  Y. Mai,et al.  Effect of blending sequence on microstructure of ternary nanocomposites , 2005 .

[28]  Jae Heung Lee,et al.  Influence of addition of organoclays on morphologies in nylon 6/LLDPE blends , 2005 .

[29]  D. R. Paul,et al.  Intercalation and exfoliation relationships in melt-processed poly(styrene-co-acrylonitrile)/montmorillonite nanocomposites , 2005 .

[30]  T. D. Fornes,et al.  Structure and Properties of Nanocomposites Based on Nylon-11 and -12 Compared with Those Based on Nylon-6 , 2004 .

[31]  Jijun Huang,et al.  Rubber toughening of an amorphous polyamide by functionalized SEBS copolymers: Morphology and Izod impact behavior , 2004 .

[32]  Min Soo Kim,et al.  Effects of the blending sequence in polyolefin ternary blends , 2004 .

[33]  R. K. Shah,et al.  Nylon 6 nanocomposites prepared by a melt mixing masterbatch process , 2004 .

[34]  B. B. Khatua,et al.  Effect of Organoclay Platelets on Morphology of Nylon-6 and Poly(ethylene-ran-propylene) Rubber Blends , 2004 .

[35]  Harald Ade,et al.  Compatibilizing Bulk Polymer Blends by Using Organoclays , 2004 .

[36]  Donald R Paul,et al.  Nylon-6 Nanocomposites from Alkylammonium-Modified Clay: The Role of Alkyl Tails on Exfoliation , 2004 .

[37]  D. R. Paul,et al.  Polycarbonate nanocomposites. Part 1. Effect of organoclay structure on morphology and properties , 2003 .

[38]  Q. Fu,et al.  Compatibilization of Immiscible Poly(propylene)/Polystyrene Blends Using Clay , 2003 .

[39]  Bernard P. Binks,et al.  Emulsions stabilised solely by colloidal particles , 2003 .

[40]  B. Hsiao,et al.  Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends , 2003 .

[41]  D. Petridis,et al.  Emulsifying effect of dimethyldioctadecylammonium-hectorite in polystyrene/poly(ethyl methacrylate) blends , 2002 .

[42]  D. Gersappe.  Molecular mechanisms of failure in polymer nanocomposites. , 2002, Physical review letters.

[43]  Donald R Paul,et al.  Thermal expansion behavior of nylon 6 nanocomposites , 2002 .

[44]  Donald R Paul,et al.  Effect of organoclay structure on nylon 6 nanocomposite morphology and properties , 2002 .

[45]  T. D. Fornes,et al.  Nylon 6 nanocomposites: the effect of matrix molecular weight , 2001 .

[46]  Donald R Paul,et al.  Effect of melt processing conditions on the extent of exfoliation in organoclay-based nanocomposites , 2001 .

[47]  J. F. Parmer,et al.  Impact modification of aromatic/aliphatic polyamide blends: Effects of composition and processing conditions , 1996 .

[48]  D. R. Paul,et al.  The role of matrix molecular weight in rubber toughened nylon 6 blends: 3. Ductile-brittle transition temperature , 1996 .

[49]  D. R. Paul,et al.  The role of matrix molecular weight in rubber toughened nylon 6 blends: 1. Morphology , 1996 .

[50]  T. Ellis.  Influence of structure on phase behavior of polyamide blends , 1991 .

[51]  R. Irani,et al.  Particle Size: Measurement, Interpretation, and Application , 1963 .