Transformer-Based Uneven Doherty Power Amplifier in 90 nm CMOS for WLAN Applications

This paper presents a fully integrated transformer-based Doherty power amplifier in a standard 90 nm CMOS process. A novel asymmetrical series combining transformer is used to achieve uneven Doherty operation. The transformer-based uneven Doherty architecture is analyzed to further improve the back-off efficiency without linearity degradation. The fabricated two-stage uneven Doherty PA achieves a maximum output power of 26.3 dBm at 2.4 GHz with a peak power added efficiency (PAE) of 33% at 2 V supply voltage. The PAE at 6 dB back-off is still as high as 25.1%. The PA is tested with 54 Mbps WLAN 802.11g signal and it meets the stringent EVM and spectral mask requirements at 19.3 dBm average output power with a PAE of 22.9% with no need of predistortion. An open loop digital predistortion is applied to further improve the linearity. The PA satisfies WLAN requirements at 20.2 dBm average output power with a PAE of 24.7% with predistortion.

[1]  L.F. Tiemeijer,et al.  Physics-based wideband predictive compact model for inductors with high amounts of dummy metal fill , 2006, IEEE Transactions on Microwave Theory and Techniques.

[2]  Patrick Reynaert,et al.  CMOS transformer-based uneven Doherty power amplifier for WLAN applications , 2011, 2011 Proceedings of the ESSCIRC (ESSCIRC).

[3]  Feipeng Wang,et al.  A Monolithic High-Efficiency 2.4-GHz 20-dBm SiGe BiCMOS Envelope-Tracking OFDM Power Amplifier , 2007, IEEE Journal of Solid-State Circuits.

[4]  D.J. Allstot,et al.  A Class-G Supply Modulator and Class-E PA in 130 nm CMOS , 2009, IEEE Journal of Solid-State Circuits.

[5]  Patrick Reynaert,et al.  A 2.4 GHz fully integrated Doherty power amplifier using series combining transformer , 2010, 2010 Proceedings of ESSCIRC.

[6]  Ali Hajimiri,et al.  Fully integrated CMOS power amplifier design using the distributed active-transformer architecture , 2002, IEEE J. Solid State Circuits.

[7]  F. Svelto,et al.  Oxide Breakdown After RF Stress: Experimental Analysis and Effects on Power Amplifier Operation , 2006, 2006 IEEE International Reliability Physics Symposium Proceedings.

[8]  R. A. Hadaway,et al.  Monolithic transformers for silicon RF IC design , 1998, Proceedings of the 1998 Bipolar/BiCMOS Circuits and Technology Meeting (Cat. No.98CH36198).

[9]  N. Wongkomet,et al.  A $+$31.5 dBm CMOS RF Doherty Power Amplifier for Wireless Communications , 2006, IEEE Journal of Solid-State Circuits.

[10]  Ali Hajimiri,et al.  A Fully-Integrated Quad-Band GSM/GPRS CMOS Power Amplifier , 2008 .

[11]  H. Zirath,et al.  A comprehensive analysis of IMD behavior in RF CMOS power amplifiers , 2004, IEEE Journal of Solid-State Circuits.

[12]  Gang Liu,et al.  Fully Integrated CMOS Power Amplifier With Efficiency Enhancement at Power Back-Off , 2008, IEEE Journal of Solid-State Circuits.

[13]  W.H. Doherty,et al.  A New High Efficiency Power Amplifier for Modulated Waves , 1936, Proceedings of the Institute of Radio Engineers.

[14]  Hsin-Shu Chen,et al.  A 2.4 GHz Fully Integrated Cascode-Cascade CMOS Doherty Power Amplifier , 2008, IEEE Microwave and Wireless Components Letters.

[15]  Yong-Zhong Xiong,et al.  Experimental Characterization of the Effect of Metal Dummy Fills on Spiral Inductors , 2007, 2007 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium.

[16]  Yorgos Palaskas,et al.  A 31.5dBm outphasing class-D power amplifier in 45nm CMOS with back-off efficiency enhancement by dynamic power control , 2011, 2011 Proceedings of the ESSCIRC (ESSCIRC).

[17]  Ali Hajimiri,et al.  Distributed active transformer-a new power-combining and impedance-transformation technique , 2002 .

[18]  Patrick Reynaert,et al.  Analysis and design of series combining transformers for integrated Doherty power amplifiers , 2010, 2010 Asia-Pacific Microwave Conference.

[19]  P. Reynaert,et al.  A 1.75-GHz polar modulated CMOS RF power amplifier for GSM-EDGE , 2005, IEEE Journal of Solid-State Circuits.

[20]  Yorgos Palaskas,et al.  A Flip-Chip-Packaged 25.3 dBm Class-D Outphasing Power Amplifier in 32 nm CMOS for WLAN Application , 2011, IEEE Journal of Solid-State Circuits.

[21]  A.M. Niknejad,et al.  A Fully Integrated Dual-Mode Highly Linear 2.4 GHz CMOS Power Amplifier for 4G WiMax Applications , 2009, IEEE Journal of Solid-State Circuits.

[22]  Feipeng Wang,et al.  An Improved Power-Added Efficiency 19-dBm Hybrid Envelope Elimination and Restoration Power Amplifier for 802.11g WLAN Applications , 2006, IEEE Transactions on Microwave Theory and Techniques.

[23]  J. Paramesh,et al.  A 90-nm CMOS Doherty power amplifier with minimum AM-PM distortion , 2006, IEEE Journal of Solid-State Circuits.