A statistical model of brittle fracture by transgranular cleavage

A MODEL for brittle fracture by transgranular cleavage cracking is presented based on the application of weakest link statistics to the critical microstructural fracture mechanisms. The model permits prediction of the macroscopic fracture toughness, K,,, in single phase microstructures containing a known distribution of particles, and defines the critical distance from the crack tip at which the initial cracking event is most probable. The model is developed for unstable fracture ahead of a sharp crack considering both linear elastic and nonlinear elastic ~‘elastjc~plastic”) crack tip stress fields. Predictions are evaluated by comparison with experimental results on the low temperature flow and fracture behavior of a low carbon mild steel with a simple ferrite/grain boundary carbide microstructure.

[1]  J. Knott,et al.  The relationship between fracture toughness and microstructure in the cleavage fracture of mild steel , 1976 .

[2]  W. Gerberich,et al.  New contributions to the effective surface energy of cleavage , 1985 .

[3]  C. J. McMahon,et al.  Initiation of cleavage in polycrystalline iron , 1965 .

[4]  David R. Owen,et al.  An elastic-plastic stress analysis for a notched bar in plane strain bending , 1971 .

[5]  G. T. Hahn,et al.  The Influence of Microstructure on Brittle Fracture Toughness , 1984 .

[6]  D. M. Tracey.  Finite Element Solutions for Crack-Tip Behavior in Small-Scale Yielding , 1976 .

[7]  J. F. Knott,et al.  Cleavage Fracture in Prestrained Mild Steel , 1975 .

[8]  Anthony G. Evans,et al.  Statistical aspects of cleavage fracture in steel , 1983 .

[9]  Kim Wallin,et al.  Statistical model for carbide induced brittle fracture in steel , 1984 .

[10]  G. Odette,et al.  Analysis of cleavage fracture potential of martensitic stainless steel fusion structures. Part I. Micromechanical models and material properties , 1983 .

[11]  F. Mcclintock,et al.  Statistical Determination of Surface Flaw Density in Brittle Materials , 1976 .

[12]  K. Sieradzki,et al.  The effect of a partially dissociated nitrogen environment on the fracture toughness of 4340 steel , 1978 .

[13]  R. Hill.  The mathematical theory of plasticity , 1950 .

[14]  John R. Rice,et al.  ON THE RELATIONSHIP BETWEEN CRITICAL TENSILE STRESS AND FRACTURE TOUGHNESS IN MILD STEEL , 1973 .

[15]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .

[16]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[17]  Robert O. Ritchie,et al.  Critical fracture stress and fracture strain models for the prediction of lower and upper shelf toughness in nuclear pressure vessel steels , 1979 .

[18]  Robert M. McMeeking,et al.  Finite deformation analysis of crack-tip opening in elastic-plastic materials and implications for fracture , 1977 .

[19]  J. Knott,et al.  Fundamentals of Fracture Mechanics , 2008 .

[20]  C. A. Rau,et al.  A general model to predict the elastic-plastic stress distribution and fracture strength of notched bars in plane strain bending☆ , 1968 .

[21]  J. F. Knott,et al.  Effects of microstructure on cleavage fracture stress in steel , 1978 .

[22]  A. Pineau,et al.  A local criterion for cleavage fracture of a nuclear pressure vessel steel , 1983 .

[23]  J. F. Knott,et al.  Effect of microstructure on cleavage fracture toughness of quenched and tempered steels , 1979 .