Coupled Modeling of Anisotropic Stress-Induced Diffusion and Trapping of Nitrogen in Austenitic Stainless Steel during Nitriding and Thermal Annealing

In this paper, nitrogen diffusion is investigated in single-crystalline austenitic stainless steel during modified layer formation and thermal annealing. A generalized system of diffusion equations is derived within a thermodynamic framework from Fick’s laws, which describe nitrogen flux under multiple driving forces, including a concentration gradient and the gradient of hydrostatic stress. Trapping and detrapping phenomena are considered within this model, and nitrogen flux is distinguished depending on whether nitrogen is in a lattice or a trapping site. Furthermore, the effects of anisotropic elasticity in single-crystal austenitic stainless steel on the stress field are investigated. The proposed model is used to simulate the nitrogen transportation process in single-crystalline AISI 316L during ion beam nitriding and after isothermal annealing at three different crystalline orientations. The results of our theoretical predictions are compared with experimental results taken from the literature. It is shown that during isothermal annealing, nitrogen diffusion becomes significantly slower than during nitriding. The diffusion coefficient during the annealing process, compared with the nitriding process, decreases by factors of 4.3, 3.3, and 2.5 for the orientations (001), (011), and (111), respectively.

[1]  F. Borgioli.  The “Expanded” Phases in the Low-Temperature Treated Stainless Steels: A Review , 2022, Metals.

[2]  A. Galdikas,et al.  The Anisotropic Stress-Induced Diffusion and Trapping of Nitrogen in Austenitic Stainless Steel during Nitriding , 2020 .

[3]  Ömer C. Kücükyildiz,et al.  Anisotropy effects on gaseous nitriding of austenitic stainless steel single crystals , 2020 .

[4]  A. Galdikas,et al.  Crystallographic Orientation Dependence of Nitrogen Mass Transport in Austenitic Stainless Steel , 2020, Metals.

[5]  F. Borgioli.  From Austenitic Stainless Steel to Expanded Austenite-S Phase: Formation, Characteristics and Properties of an Elusive Metastable Phase , 2020, Metals.

[6]  J. Hattel,et al.  Thermo-chemical-mechanical simulation of low temperature nitriding of austenitic stainless steel; inverse modelling of surface reaction rates , 2020 .

[7]  T. Czerwiec,et al.  Is “expanded austenite” really a solid solution? Mössbauer observation of an annealed AISI 316L nitrided sample , 2019, Journal of Alloys and Compounds.

[8]  A. Galdikas,et al.  Kinetic model of anisotropic stress assisted diffusion of nitrogen in nitrided austenitic stainless steel , 2019, Surface and Coatings Technology.

[9]  Casper Alexander Ormstrup,et al.  Residual Stress in Expanded Austenite on Stainless Steel; Origin, Measurement, and Prediction , 2018, Materials Performance and Characterization.

[10]  Margaret K. A. Koker,et al.  Measured resolved shear stresses and Bishop-Hill stress states in individual grains of austenitic stainless steel , 2017 .

[11]  D. Mekki,et al.  Thermal stability and phase decomposition of nitrided layers on 316L and 310 austenitic stainless steels , 2017 .

[12]  A. P. Tschiptschin,et al.  Thermal stability of expanded austenite formed on a DC plasma nitrided 316L austenitic stainless steel , 2017 .

[13]  J. Baranowska,et al.  Microstructure of reactive magnetron sputtered S-phase coatings with a diffusion sub-layer , 2017 .

[14]  F. Ernst,et al.  Thermal stability of low-temperature-carburized austenitic stainless steel , 2017 .

[15]  G. Ybarra,et al.  Plasma nitriding of 316L stainless steel in two different N2-H2 atmospheres - Influence on microstructure and corrosion resistance , 2017 .

[16]  J. Hattel,et al.  Modelling the evolution of composition-and stress-depth profiles in austenitic stainless steels during low-temperature nitriding , 2016 .

[17]  A. Leineweber,et al.  Dependence of the nitriding rate of ferritic and austenitic substrates on the crystallographic orientation of surface grains; gaseous nitriding of Fe-Cr and Ni-Ti alloys , 2015 .

[18]  H. Kahn,et al.  Orientation dependence of nitrogen supersaturation in austenitic stainless steel during low-temperature gas-phase nitriding , 2014 .

[19]  P. Cloetens,et al.  Anisotropic elasticity of silicon and its application to the modelling of X-ray optics , 2014, Journal of synchrotron radiation.

[20]  K. Temst,et al.  Magnetic properties of single crystalline expanded austenite obtained by plasma nitriding of austenitic stainless steel single crystals. , 2013, ACS applied materials & interfaces.

[21]  M. Drouet,et al.  Isotope exchange investigation of nitrogen redistribution in expanded austenite , 2013 .

[22]  J. Baranowska,et al.  The influence of temperature and nitrogen pressure on S-phase coatings deposition by reactive magnetron sputtering , 2013 .

[23]  M. Milanese,et al.  Stability of expanded austenite, generated by ion carburizing and ion nitriding of AISI 316L SS, under high temperature and high energy pulsed ion beam irradiation , 2013 .

[24]  M. Keddam,et al.  Microstructural Characterization of the expanded austenite formed on the plasma nitrided AISI 316 L steel , 2013 .

[25]  A. Galdikas,et al.  Stress induced and concentration dependent diffusion of nitrogen in plasma nitrided austenitic stainless steel , 2012 .

[26]  W. Möller,et al.  Influence of crystal orientation and ion bombardment on the nitrogen diffusivity in single-crystalline austenitic stainless steel , 2011 .

[27]  A. Galdikas,et al.  Modeling of stress induced nitrogen diffusion in nitrided stainless steel , 2011 .

[28]  J. Rivière,et al.  Modeling of nitrogen penetration in polycrystalline AISI 316L austenitic stainless steel during plasma nitriding , 2011 .

[29]  T. Christiansen,et al.  Expanded austenite, crystallography and residual stress , 2010 .

[30]  T. Christiansen,et al.  The Influence of Stress on Interstitial Diffusion - Carbon Diffusion Data in Austenite Revisited , 2010 .

[31]  W. Möller,et al.  Anisotropic ion-enhanced diffusion during ion nitriding of single crystalline austenitic stainless steel , 2009 .

[32]  H. Kahn,et al.  Poisson Effects on X-Ray Diffraction Patterns in Low-Temperature-Carburized Austenitic Stainless Steel , 2009 .

[33]  T. Suszko,et al.  THE PROPERTIES OF HARD COATING COMPOSED OF s-PHASE OBTAINED BY PVD METHOD , 2009 .

[34]  M. Fewell,et al.  High-order diffractometry of expanded austenite using synchrotron radiation , 2008 .

[35]  K. Dahl,et al.  Nitrogen diffusion and nitrogen depth profiles in expanded austenite: experimental assessment, numerical simulation and role of stress , 2008 .

[36]  C. Dong,et al.  Reactive magnetron sputtering of Inconel 690 by Ar–N2 plasma , 2008 .

[37]  Zhen Liu,et al.  Elastic anisotropy of γ'-Fe4N and elastic grain interaction in γ'-Fe4N1-y layers on α-Fe: first-principles calculations and diffraction stress measurements , 2007 .

[38]  A. P. Tschiptschin,et al.  On the formation of expanded austenite during plasma nitriding of an AISI 316L austenitic stainless steel , 2006 .

[39]  Xinxin Ma,et al.  Anomalous ion accelerated bulk diffusion of interstitial nitrogen. , 2006, Physical review letters.

[40]  Yong Sun,et al.  Influence of sputter deposition conditions on phase evolution in nitrogen-doped stainless steel films , 2005 .

[41]  C. Dong,et al.  Stress Induced Anisotropic Diffusion during Plasma-Assisted Nitriding of a Ni-Based Alloy , 2005 .

[42]  K. Short,et al.  Temperature effect of nitrided stainless steel coatings deposited by reactive DC-magnetron sputtering , 2004 .

[43]  J. Baranowska.  Characteristic of the nitride layers on the stainless steel at low temperature , 2004 .

[44]  F. Scholze,et al.  Nitrogen diffusivity in expanded austenite , 2003 .

[45]  C. Dong,et al.  Effect of grain orientation on the nitriding rate of a nickel base alloy studied by electron backscatter diffraction , 2003 .

[46]  J. Rivière,et al.  Corrosion behaviour, microhardness and surface characterisation of low energy, high current ion implanted austenitic stainless steel , 2001 .

[47]  W. Möller,et al.  Surface processes and diffusion mechanisms of ion nitriding of stainless steel and aluminium , 2001 .

[48]  P. Dearnley,et al.  On the nature, properties and wear response of s-phase (nitrogen-alloyed stainless steel) coatings on AISI 316L , 2000 .

[49]  M. Fewell,et al.  The nature of expanded austenite , 2000 .

[50]  Thierry Czerwiec,et al.  Low-temperature plasma-assisted nitriding , 2000 .

[51]  S. Mändl,et al.  Anisotropic strain in nitrided austenitic stainless steel , 2000 .

[52]  W. Möller,et al.  The nitrogen transport in austenitic stainless steel at moderate temperatures , 2000 .

[53]  L. Pranevičius,et al.  Surface composition changes of ternary alloys in the non-steady state regime of preferential sputtering , 2000 .

[54]  Y. Jirásková,et al.  Thermal Stability of Stainless Steel Surfaces Nitrided by Plasma Immersion Ion Implantation , 1999 .

[55]  K. Rie,et al.  Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding , 1999 .

[56]  Paul J. Wilbur,et al.  Effect of austenitic stainless steel composition on low-energy, high-flux, nitrogen ion beam processing , 1998 .

[57]  M. Fewell,et al.  Rf-plasma nitriding of stainless steel , 1998 .

[58]  K. Rie,et al.  Structure and properties of plasma-nitrided stainless steel , 1995 .

[59]  R. A. Oriani,et al.  The diffusion and trapping of hydrogen in steel , 1970 .

[60]  C. Zener.  Contributions to the Theory of Beta-Phase Alloys , 1947 .