Functionally graded polyetheretherketone-based composites additively manufactured by material extrusion using a transition interface design method

[1]  Jihong Zhu,et al.  Additive manufacturing of polymeric composites from material processing to structural design , 2021 .

[2]  Zongliang Wang,et al.  Enhancing antibacterial capability and osseointegration of polyetheretherketone (PEEK) implants by dual-functional surface modification , 2021, Materials & Design.

[3]  Xiping Li,et al.  Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone (PEEK) composites , 2021 .

[4]  Daniele Dini,et al.  A dual nozzle 3D printing system for super soft composite hydrogels , 2021, HardwareX.

[5]  Tianxi Liu,et al.  3D printing of polycaprolactone-based composites with diversely tunable mechanical gradients via multi-material fused deposition modeling , 2021, Composites Communications.

[6]  Kumar V. Singh,et al.  A methodology for the design, fabrication and testing of axially graded polymeric structures with tailored vibration characteristics , 2021 .

[7]  C. Duty,et al.  Characterizing material transitions in large-scale Additive Manufacturing , 2020 .

[8]  Yongsheng Ma,et al.  Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing , 2020 .

[9]  I. Fidan,et al.  Mechanical characterization of functionally graded materials produced by the fused filament fabrication process , 2020, Journal of Manufacturing Processes.

[10]  Chuanzhen Huang,et al.  Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK , 2020 .

[11]  Lixin Wu,et al.  Fabrication of thermoplastic functionally gradient composite parts with anisotropic thermal conductive properties based on multicomponent fused deposition modeling 3D printing , 2020 .

[12]  Flávio Craveiro,et al.  An automated system for 3D printing functionally graded concrete-based materials , 2020 .

[13]  E. L. Doubrovski,et al.  Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing , 2020, Composite Structures.

[14]  Rafiq Ahmad,et al.  The impact on the mechanical properties of multi-material polymers fabricated with a single mixing nozzle and multi-nozzle systems via fused deposition modeling , 2020 .

[15]  M. Sitti,et al.  Additive manufacturing of cellulose-based materials with continuous, multidirectional stiffness gradients , 2020, Science Advances.

[16]  Inigo F. Ituarte,et al.  Design and additive manufacture of functionally graded structures based on digital materials , 2019 .

[17]  A. Schlarb,et al.  Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM) , 2019, Composites Part B: Engineering.

[18]  Mark A. Skylar-Scott,et al.  Voxelated soft matter via multimaterial multinozzle 3D printing , 2019, Nature.

[19]  Bin Zou,et al.  Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM , 2019, Polymer Testing.

[20]  Chuanzhen Huang,et al.  Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK , 2019, Journal of Materials Processing Technology.

[21]  A. Schlarb,et al.  Recycled carbon fibers as reinforcements for hybrid PEEK composites with excellent friction and wear performance , 2019, Wear.

[22]  Carmen M. González-Henríquez,et al.  Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications , 2019, Progress in Polymer Science.

[23]  Daining Fang,et al.  Grayscale digital light processing 3D printing for highly functionally graded materials , 2019, Science Advances.

[24]  Brian R. Mace,et al.  Numerical and experimental study on deformation of 3D-printed polymeric functionally graded plates: 3D-Digital Image Correlation approach , 2019, Composite Structures.

[25]  Dichen Li,et al.  Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications , 2019, Journal of clinical medicine.

[26]  B. Derby,et al.  3D printing of materials with spatially non-linearly varying properties , 2018, Materials & Design.

[27]  G. H. Loh,et al.  An overview of functionally graded additive manufacturing , 2018, Additive Manufacturing.

[28]  F. Senatov,et al.  3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties , 2018 .

[29]  A. Bandyopadhyay,et al.  Additive manufacturing of multi-material structures , 2018, Materials Science and Engineering: R: Reports.

[30]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[31]  D. Lin,et al.  A review on additive manufacturing of polymer-fiber composites , 2017 .

[32]  K. Hokkirigawa,et al.  Dry sliding friction of ethylene vinyl acetate blocks: Effect of the porosity , 2017 .

[33]  Xiaoyong Tian,et al.  Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material , 2017 .

[34]  Marc A. Meyers,et al.  Functional gradients and heterogeneities in biological materials: Design principles, functions, and bioinspired applications , 2017 .

[35]  Antonios G Mikos,et al.  3D printing for the design and fabrication of polymer-based gradient scaffolds. , 2017, Acta biomaterialia.

[36]  W. Lau,et al.  Functionally graded polymeric materials: A brif review of current fabrication methods and introduction of a novel fabrication method. , 2016, Materials science & engineering. C, Materials for biological applications.

[37]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[38]  K. Friedrich,et al.  On the friction and wear behaviour of PAN- and pitch-carbon fiber reinforced PEEK composites , 1999 .

[39]  M. A. Xavior,et al.  Synthesis and Testing of FGM made of ABS Plastic Material , 2020 .

[40]  S. Ozcan,et al.  Additively manufactured carbon fiber-reinforced composites: State of the art and perspective , 2020, Additive Manufacturing.

[41]  Q. Zeng.  A random critical-core theory of microdamage in interply hybrid composites. II: Ultimate failure , 1994 .

[42]  Q. Zeng,et al.  A random critical-core theory of microdamage in interply hybrid composites: I—First failure and hybrid effect , 1993 .