Numerical Modeling and Experimental Verification of Residual Stress in Autogenous Laser Welding of High-Strength Steel
暂无分享,去创建一个
R. Kovacevic | Wei Liu | F. Kong | Shuang Liu | Junjie Ma
[1] R. Kovacevic,et al. Hybrid laser-arc welding of advanced high-strength steel , 2014 .
[2] Radovan Kovacevic,et al. An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser , 2014 .
[3] Dean Deng,et al. A comparative study on welding temperature fields, residual stress distributions and deformations induced by laser beam welding and CO2 gas arc welding , 2014 .
[4] R. Kovacevic,et al. Study on the strength and failure modes of laser welded galvanized DP980 steel lap joints , 2014 .
[5] Radovan Kovacevic,et al. Real-time monitoring of the laser hot-wire welding process , 2014 .
[6] R. Kovacevic,et al. Residual Stress Analysis and Weld Bead Shape Study in Laser Welding of High Strength Steel , 2013 .
[7] S. Chumbley,et al. The Residual Stress Relaxation Behavior of Weldments During Cyclic Loading , 2013, Metallurgical and Materials Transactions A.
[8] R. Kovacevic,et al. Development of a Comprehensive Process Model for Hybrid Laser-Arc Welding , 2012 .
[9] Xibing Gong,et al. Review on powder-based electron beam additive manufacturing technology , 2012 .
[10] Eric M. Johnson,et al. The effect of specimen dimension on residual stress relaxation of carburized and quenched steels , 2011 .
[11] Wiesława Piekarska,et al. Three-dimensional model for numerical analysis of thermal phenomena in laser–arc hybrid welding process , 2011 .
[12] M. Rethmeier,et al. Influences of mesh density and transformation behavior on the result quality of numerical calculation of welding induced distortion , 2011, Simul. Model. Pract. Theory.
[13] Radovan Kovacevic,et al. Numerical and experimental study of thermally induced residual stress in the hybrid laser–GMA welding process , 2011 .
[14] J. Mazumder,et al. Laser material processing: Fourth edition , 2010 .
[15] Yong Wang,et al. Three-dimensional finite element analysis of temperatures and stresses in wide-band laser surface melting processing , 2010 .
[16] Paul A. Colegrove,et al. Welding process impact on residual stress and distortion , 2009 .
[17] A. De,et al. Development of a finite element based heat transfer model for conduction mode laser spot welding process using an adaptive volumetric heat source , 2009 .
[18] Markus Gross,et al. Comprehensive Numerical Simulation of Laser Materials Processing , 2009 .
[19] M. Zain-ul-Abdein,et al. Prediction of laser beam welding-induced distortions and residual stresses by numerical simulation for aeronautic application , 2009 .
[20] S. Na,et al. Three-Dimensional Analysis of Molten Pool in GMA-Laser Hybrid Welding , 2009 .
[21] D. Deng. FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects , 2009 .
[22] Iris V. Rivero,et al. Evaluation of Surface Residual Stresses in Friction Stir Welds Due to Laser and Shot Peening , 2007 .
[23] Zhili Feng. Processes and mechanisms of welding residual stress and distortion , 2005 .
[24] Hisashi Serizawa,et al. Numerical Simulation of Residual Stress and Deformation Considering Phase Transformation Effects(Mechanics, Strength & Structural Design) , 2003 .
[25] Hisashi Serizawa,et al. Numerical simulation of residual stress and deformation considering phase transformation effect , 2003 .
[26] P. Papanikos,et al. Numerical simulation of the laser welding process in butt-joint specimens , 2003 .
[27] S. Cho,et al. Analysis of residual stress in carbon steel weldment incorporating phase transformations , 2002 .
[28] Yuh J. Chao,et al. Effects of temperature-dependent material properties on welding simulation , 2002 .
[29] Ranga Komanduri,et al. Thermal analysis of the arc welding process: Part I. General solutions , 2000 .
[30] S. B. Brown,et al. Finite Element Simulation of Welding of Large Structures , 1992 .
[31] P. Tekriwal,et al. Transient and Residual Thermal Strain-Stress Analysis of GMAW , 1991 .
[32] John Dowden,et al. The theory of laser materials processing : heat and mass transfer in modern technology , 2009 .
[33] C. Tsai,et al. 1 – Understanding residual stress and distortion in welds: an overview , 2005 .
[34] L. Lindgren,et al. Simulation of Multipass Welding With Simultaneous Computation of Material Properties , 2001 .
[35] D. Scott,et al. Finite element method of pulsed laser welding , 1999 .
[36] D. A. Scott,et al. Finite element model of pulsed laser welding , 1999 .