Laboratory control implementations for doubly-fed machines

Brushless doubly-fed machines attempt to achieve the benefits of adjustable speed drives while minimizing power converter rating and cost. However, since only one set of stator windings is controllable, control of the resulting motor drive is potentially more complex than for conventional singly-fed systems. While the doubly-fed machine system is open-loop stable, dynamic response and steady state performance can be far from optimum in the open-loop mode of operation. This has prompted the development of closed-loop control algorithms ranging from simple stabilizing speed feedback and power factor adjustment to fast, predictive torque control based on instantaneous error. The present paper discusses the laboratory implementation of proposed control schemes for brushless doubly-fed drives.<<ETX>>

[1]  M. Depenbrock,et al.  Direct self-control (DSC) of inverter-fed induction machine , 1988 .

[2]  G.C. Alexander,et al.  Frequency-domain parameter estimation for the brushless doubly-fed machine , 1993, Conference Record of the Power Conversion Conference - Yokohama 1993.

[3]  T. G. Habetler,et al.  Direct torque control for brushless doubly-fed machines , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.

[4]  Dragan Maksimovic,et al.  Constant-frequency control of quasi-resonant converters , 1991 .

[5]  A. Wallace,et al.  Determination of converter control algorithms for stable brushless doubly-fed drives using Floquet and Lyapunov techniques , 1991, PESC '91 Record 22nd Annual IEEE Power Electronics Specialists Conference.

[6]  Ivo Barbi,et al.  Buck quasi-resonant converter operating at constant frequency: analysis, design and experimentation , 1989 .

[7]  R. Spee,et al.  Model reference adaptive speed control for doubly-fed machines , 1993, Proceedings of IECON '93 - 19th Annual Conference of IEEE Industrial Electronics.

[8]  Fred C. Lee,et al.  Novel zero-voltage-transition PWM converters , 1992 .

[9]  D. C. Martins,et al.  Buck quasi-resonant converter operating at constant frequency: analysis, design and experimentation , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[10]  E. E. Buchanan,et al.  Resonant switching power conversion technique , 1975, 1975 IEEE Power Electronics Specialists Conference.

[12]  F. Lee,et al.  Zero-voltage switching technique in DC/DC converters , 1986, 1986 17th Annual IEEE Power Electronics Specialists Conference.

[13]  Alan K. Wallace,et al.  The brushless doubly-fed motor as a limited-speed-range pump drive , 1993, ISIE '93 - Budapest: IEEE International Symposium on Industrial Electronics Conference Proceedings.

[14]  Alan K. Wallace,et al.  Synchronous drive performance of brushless doubly-fed motors , 1992, Conference Record of the 1992 IEEE Industry Applications Society Annual Meeting.