Precision Motion Control of Constrained SISO Nonlinear System via Direct Optimized Compensation

Maintaining high precision tracking while considering both state and input constraints has always been a challenging issue, where most existing studies merely solve constrained issues and few take integrated performance into account. Thus, we put forwarded a direct optimization-based compensation adaptive robust control (DOCARC) approach for single input single output(SISO) nonlinear system, where the model compensation term of the control input is directly optimized and the reference is simultaneously replanned so as to conform to the constraints. Simulations are conducted in the single-axis linear motor system, and comparative results further verify the superiority and effectiveness of the proposed scheme.

[1]  Bin Yao,et al.  Fast and Accurate Motion Tracking of a Linear Motor System Under Kinematic and Dynamic Constraints: An Integrated Planning and Control Approach , 2021, IEEE Transactions on Control Systems Technology.

[2]  David Q. Mayne,et al.  Constrained model predictive control: Stability and optimality , 2000, Autom..

[3]  Stefano Di Cairano,et al.  Reference and command governors for systems with constraints: A survey on theory and applications , 2017, Autom..

[4]  Bin Yao,et al.  Decoupled Torque Control of Series Elastic Actuator With Adaptive Robust Compensation of Time-Varying Load-Side Dynamics , 2020, IEEE Transactions on Industrial Electronics.

[5]  Bin Yao,et al.  Precision Motion Control of a Servomotor-Pump Direct-Drive Electrohydraulic System With a Nonlinear Pump Flow Mapping , 2020, IEEE Transactions on Industrial Electronics.

[6]  Yaoyao Wang,et al.  Practical adaptive fractional‐order nonsingular terminal sliding mode control for a cable‐driven manipulator , 2018, International Journal of Robust and Nonlinear Control.

[7]  Toshiyuki Ohtsuka,et al.  A Parallel Code Generation Toolkit for Nonlinear Model Predictive Control , 2018, 2018 IEEE Conference on Decision and Control (CDC).

[8]  Zhiyuan Liu,et al.  Two-Time-Scale Redesign for Antilock Braking Systems of Ground Vehicles , 2019, IEEE Transactions on Industrial Electronics.

[9]  Alberto Bemporad,et al.  Robust model predictive control: A survey , 1998, Robustness in Identification and Control.

[10]  Wei Shen,et al.  An integral terminal sliding mode control scheme for speed control system using a double-variable hydraulic transformer. , 2019, ISA transactions.

[11]  Yanbin Liu,et al.  Constrained Sampled-Data ARC for a Class of Cascaded Nonlinear Systems With Applications to Motor-Servo Systems , 2019, IEEE Transactions on Industrial Informatics.

[12]  Edoardo Mosca,et al.  Robust command governors for constrained linear systems , 2000, IEEE Trans. Autom. Control..

[13]  E. Mosca,et al.  Nonlinear control of constrained linear systems via predictive reference management , 1997, IEEE Trans. Autom. Control..

[14]  C. S. George Lee,et al.  Exponential Stabilization of Fully Actuated Planar Bipedal Robotic Walking With Global Position Tracking Capabilities , 2018 .

[15]  Feng Ju,et al.  A New Adaptive Time-Delay Control Scheme for Cable-Driven Manipulators , 2019, IEEE Transactions on Industrial Informatics.