TiN Thickness Impact on BTI Performance

In this letter, we investigate the effects of the TiN metal-gate (MG) electrode on bias temperature instability (BTI) in high-k/MG metal-oxide-semiconductor field-effect transistors. Experimental data show that a thicker TiN film effectively improves bias temperature stability. The thick TiN layer prevents oxygen diffusion toward the α-Si gate electrode; therefore, it suppresses the number of oxygen vacancies in the LaO/HfSiON gate dielectric stack, lessens BTI degradation, and improves interface quality.

[1]  Young Hee Kim,et al.  Bias-temperature instabilities of polysilicon gate HfO/sub 2/ MOSFETs , 2003 .

[2]  R. Jammy,et al.  CMOS band-edge schottky barrier heights using dielectric-dipole mitigated (DDM) metal/Si for source/drain contact resistance reduction , 2006, 2009 Symposium on VLSI Technology.

[3]  G. Groeseneken,et al.  A reliable approach to charge-pumping measurements in MOS transistors , 1984, IEEE Transactions on Electron Devices.

[4]  E. Cartier,et al.  Threshold Voltage Instabilities in High- Gate Dielectric Stacks , 2005 .

[5]  Martin M. Frank,et al.  Scaling the MOSFET gate dielectric: From high-k to higher-k? (Invited Paper) , 2009 .

[6]  E. Cartier,et al.  Threshold voltage instabilities in high-/spl kappa/ gate dielectric stacks , 2005, IEEE Transactions on Device and Materials Reliability.

[7]  C. Shen,et al.  Energy distribution of interface traps in germanium metal-oxide-semiconductor field effect transistors with HfO2 gate dielectric and its impact on mobility , 2008 .

[8]  Negative bias temperature instabilities in HfSiON/TaN-based pMOSFETs , 2004, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..

[9]  V. Narayanan,et al.  Fundamental understanding and optimization of PBTI in nFETs with SiO2/HfO2 gate stack , 2006, 2006 International Electron Devices Meeting.

[10]  R. Wallace,et al.  Near band edge Schottky barrier height modulation using high-κ dielectric dipole tuning mechanism , 2009 .

[11]  R. Jammy,et al.  Mechanism of Vfb roll-off with High Work function Metal Gate and Low Temperature Oxygen Incorporation to Achieve PMOS Band Edge Work function , 2007, 2007 IEEE International Electron Devices Meeting.