Eliminating Underconstraint in Double Parallelogram Flexure Mechanisms

We present an improved flexure linkage design for removing underconstraint in a double parallelogram (DP) linear flexural mechanism. This new linkage alleviates many of the problems associated with current linkage design solutions such as static and dynamic performance losses and increased footprint. The improvements of the new linkage design will enable wider adoption of underconstraint eliminating (UE) linkages, especially in the design of linear flexural bearings. Comparisons are provided between the new linkage design and existing UE designs over a range of features including footprint, dynamics, and kinematics. A nested linkage design is shown through finite element analysis (FEA) and experimental measurement to work as predicted in selectively eliminating the underconstrained degrees-of-freedom (DOF) in DP linear flexure bearings. The improved bearing shows an 11 × gain in the resonance frequency and 134× gain in static stiffness of the underconstrained DOF, as designed. Analytical expressions are presented for designers to calculate the linear performance of the nested UE linkage (average error < 5%). The concept presented in this paper is extended to an analogous double-nested rotary flexure design.

[1]  Dannis Michel Brouwer.  Design principles for six degrees-of-freedom MEMS-based precision manipulators , 2007 .

[2]  Xianwen Kong,et al.  Design and Modelling of Spatial Compliant Parallel Mechanisms for Large Range of Translation , 2010 .

[3]  Xianwen Kong,et al.  Conceptual design of compliant translational joints for high-precision applications , 2014 .

[4]  S. Awtar,et al.  Note: an asymmetric flexure mechanism for comb-drive actuators. , 2012, The Review of scientific instruments.

[5]  Nam P. Suh,et al.  Axiomatic Design: Advances and Applications , 2001 .

[6]  Stuart T. Smith,et al.  Flexures: Elements of Elastic Mechanisms , 2000 .

[7]  Dannis Michel Brouwer,et al.  Position control of a MEMS stage with integrated sensor , 2011 .

[8]  Philip Dowd,et al.  Tilted folded-beam suspension for extending the stable travel range of comb-drive actuators , 2003 .

[9]  Stuart T. Smith,et al.  Foundations of ultraprecision mechanism design , 1992 .

[10]  Kira Barton,et al.  Large dynamic range nanopositioning using iterative learning control , 2014 .

[11]  Paul Johnson,et al.  Design and production of the METOP satellite IASI corner cube mechanisms , 2003 .

[12]  Phj Piet Schellekens,et al.  An elastically guided machine axis with nanometer repeatability , 2005 .

[13]  Jonathan B. Hopkins,et al.  Synthesis of multi-degree of freedom, parallel flexure system concepts via freedom and constraint topology (FACT). Part II: Practice , 2010 .

[14]  R V Jones,et al.  Some uses of elasticity in instrument design , 1962 .

[15]  Qingsong Xu,et al.  Design and Analysis of a Totally Decoupled Flexure-Based XY Parallel Micromanipulator , 2009, IEEE Transactions on Robotics.

[16]  F. Rudolf,et al.  Novel polysilicon comb actuators for xy-stages , 1992, [1992] Proceedings IEEE Micro Electro Mechanical Systems.

[17]  Chengkuo Lee,et al.  Design and modeling for comb drive actuator with enlarged static displacement , 2004 .

[18]  Zhao Hongzhe,et al.  Design of a Family of Ultra-Precision Linear Motion Mechanisms , 2012 .

[19]  Sub-nanometer stable precision MEMS clamping mechanism maintaining clamp force un-powerd for TEM application , 2005 .

[20]  J. Gorman,et al.  Large Stroke Electrostatic Comb-Drive Actuators Enabled by a Novel Flexure Mechanism , 2013, Journal of Microelectromechanical Systems.

[21]  Robert M. Panas,et al.  A Family of Flexures That Eliminate Underconstraint in Nested Large-Stroke Flexure Systems , 2013 .

[22]  S. H. Chang,et al.  A high resolution long travel friction-drive micropositioner with programmable step size , 1999 .

[23]  Martin L. Culpepper,et al.  Design of piezoresistive-based MEMS sensor systems for precision microsystems , 2012 .

[24]  Gene F. Franklin,et al.  Feedback Control of Dynamic Systems , 1986 .

[25]  Dannis Michel Brouwer,et al.  Design and modeling of a six DOFs MEMS-based precision manipulator , 2010 .

[26]  I R Young,et al.  Some parasitic deflexions in parallel spring movements , 1956 .

[27]  Stuart T. Smith.  Mechanical systems in nanometre metrology , 1987 .

[28]  T. Kenny,et al.  Design of large deflection electrostatic actuators , 2003 .

[29]  J. Van Eijk,et al.  On the design of plate-spring mechanisms , 1985 .

[30]  Sridhar Kota,et al.  New design for suspension of linear microactuators , 1994 .

[31]  Shorya Awtar,et al.  An Enhanced Stability Model for Electrostatic Comb-Drive Actuator Design , 2010 .

[32]  Ted Lauritzen,et al.  Linear motion machine for soft x-ray interferometry , 1997, Optics & Photonics.

[33]  Jing Fang,et al.  Nanoscale in-plane displacement evaluation by AFM scanning and digital image correlation processing , 2005 .

[34]  Qingsong Xu,et al.  Novel design of a totally decoupled flexure-based XYZ parallel micropositioning stage , 2010, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[35]  Jean Edouard Plainevaux.  Guidage rectiligne sur lames élastiques. Comparaison de divers types connus et nouveaux , 1954 .

[36]  Shorya Awtar,et al.  Characteristics of Beam-Based Flexure Modules , 2007 .

[37]  Dannis Michel Brouwer,et al.  Flexures for large stroke electrostatic actuation in MEMS , 2013 .

[38]  Shusheng Bi,et al.  A novel compliant linear-motion mechanism based on parasitic motion compensation , 2012 .

[39]  Dannis Michel Brouwer,et al.  Long-range Elastic Guidance Mechanisms for Electrostatic Comb-drive Actuators , 2010 .

[40]  A. Slocum,et al.  Precision Machine Design , 1992 .

[41]  Larry L. Howell,et al.  A Novel Fully Compliant Planar Linear-Motion Mechanism , 2004 .

[42]  Shorya Awtar,et al.  Synthesis and analysis of parallel Kinematic XY flexure mechanisms , 2003 .

[43]  Jean Edouard Plainevaux.  Mouvement parasite vertical d’une suspension élastique symétrique à compensation et asservissement , 1954 .

[44]  Jonathan B. Hopkins,et al.  Synthesis of precision serial flexure systems using freedom and constraint topologies (FACT) , 2011 .