Some observations on ISO2394:2015 Annex D (Reliability of Geotechnical Structures)

Abstract ISO2394:2015 contains a new informative Annex D on “Reliability of Geotechnical Structures”. The emphasis in Annex D is to identify and characterize critical elements of the geotechnical reliability-based design (RBD) process, while respecting the diversity of geotechnical engineering practice arising from the influence of site-specific conditions. Annex D should pave the way for future code revisions to inject greater realism into geotechnical RBD. The most important element is the characterization of geotechnical variability. There are some noteworthy features: (1) the coefficient of variation (COV) of a geotechnical design parameter does not fall within a narrow range of values, (2) the multivariate nature of geotechnical data can be exploited to reduce the COV, (3) spatial variability affects the limit state beyond reduction in COV due to spatial averaging, and (4) statistical uncertainty may be significant, because the volume of soil sampled is a minute fraction of the volume of interest. Another important element is the characterization of model uncertainty. Geotechnical design codes, be it reliability-based or otherwise, must cater to diverse local site conditions and diverse local practices that grew and evolved over the years to suit these conditions. One obvious example is that the COVs of geotechnical parameters can vary over a wide range, because diverse property evaluation methodologies exist to cater to these diverse practice and site conditions. Another example is that deep foundations are typically installed in layered soil profiles that vary from site to site. These diverse site specific design scenarios do not surface in structural engineering. Section D.5.2 notes that reliability calibration for geotechnical RBD is more challenging for this reason.

[1]  K. Phoon,et al.  Characterization of Geotechnical Variability , 1999 .

[2]  Kok-Kwang Phoon,et al.  Reliability-Based Design of Foundations for Transmission Line Structures , 2006 .

[3]  Ralph B. Peck,et al.  Judgment in geotechnical engineering : the professional legacy of Ralph B. Peck , 1984 .

[4]  Jr. John A. Focht.  LESSONS LEARNED FROM MISSED PREDICTIONS , 1994 .

[5]  Gordon A. Fenton,et al.  Geotechnical resistance factors for ultimate limit state design of deep foundations in frictional soils. , 2011 .

[6]  Burt G. Look,et al.  Handbook of geotechnical investigation and design tables , 2007 .

[7]  K. Phoon,et al.  On characterizing spatially variable soil shear strength using spatial average , 2016 .

[8]  Fred H. Kulhawy,et al.  Expanded Reliability-Based Design Approach for Drilled Shafts , 2011 .

[9]  John Burland.  The founders of Géotechnique , 2008 .

[10]  Makoto Suzuki,et al.  Code calibration in reliability based design level I verification format for geotechnical structures , 2009 .

[11]  Henry Petroski,et al.  Design Paradigms: Case Histories of Error and Judgment in Engineering , 1994 .

[12]  Armin W. Stuedlein,et al.  Random Field Model Parameters for Columbia River Silt , 2011 .

[13]  Celal Karpuz,et al.  Rock variability and establishing confining pressure levels for triaxial tests on rocks , 2006 .

[14]  Steven L. Kramer,et al.  Geotechnical Characterization and Random Field Modeling of Desiccated Clay , 2012 .

[15]  E. Vanmarcke.  Probabilistic Modeling of Soil Profiles , 1977 .

[16]  Dimitris Diamantidis,et al.  The Joint Committee on Structural Safety (JCSS) Probabilistic Model Code for New and Existing Structures , 1999 .

[17]  Yu Wang,et al.  Bayesian approach for probabilistic characterization of sand friction angles , 2010 .

[18]  F. Kulhawy,et al.  Effects of Testing Conditions on Intact Rock Strength and Variability , 2011 .

[19]  Roger Frank,et al.  Model factor for the bearing capacity of piles from pressuremeter test results – Eurocode 7 approach , 2014 .

[20]  Kok-Kwang Phoon,et al.  Multiple Resistance Factor Design for Shallow Transmission Line Structure Foundations , 2003 .

[21]  Armin W. Stuedlein,et al.  Reliability-based serviceability limit state design for immediate settlement of spread footings on clay , 2015 .

[22]  Armin W. Stuedlein,et al.  Factors Affecting the Reliability of Augered Cast-In-Place Piles in Granular Soils at the Serviceability Limit State (DFI 2013 Young Professor Paper Competition Winner) , 2013 .

[23]  J M Duncan,et al.  MANUALS FOR THE DESIGN OF BRIDGE FOUNDATIONS: SHALLOW FOUNDATIONS, DRIVEN PILES, RETAINING WALLS AND ABUTMENTS, DRILLED SHAFTS, ESTIMATING TOLERABLE MOVEMENTS, AND LOAD FACTOR DESIGN SPECIFICATIONS AND COMMENTARY , 1991 .

[24]  Yu Wang,et al.  Bayesian perspective on geotechnical variability and site characterization , 2016 .

[25]  Dian-Qing Li,et al.  Quantification of prior knowledge in geotechnical site characterization , 2016 .

[26]  Ka-Veng Yuen,et al.  Predictive model for uniaxial compressive strength for Grade III granitic rocks from Macao , 2015 .

[27]  Dian-Qing Li,et al.  Evaluating slope stability uncertainty using coupled Markov chain , 2016 .

[28]  Kok-Kwang Phoon,et al.  Undrained strength for a 3D spatially variable clay column subjected to compression or shear , 2016 .

[29]  Li Min Zhang,et al.  CALIBRATION OF METHODS FOR DESIGNING LARGE-DIAMETER BORED PILES: ULTIMATE LIMIT STATE , 2009 .

[30]  Kok-Kwang Phoon,et al.  Mean and Variance of Mobilized Shear Strength for Spatially Variable Soils under Uniform Stress States , 2014 .

[31]  Ralph B. Peck,et al.  "Where has all the judgment gone?" The fifth Laurits Bjerrum memorial lecture , 1980 .

[32]  Kok-Kwang Phoon,et al.  Model uncertainty of cylindrical shear method for calculating the uplift capacity of helical anchors in clay , 2016 .

[33]  D. V. Griffiths,et al.  Risk Assessment in Geotechnical Engineering , 2008 .

[34]  Erik H. Vanmarcke,et al.  Random Fields: Analysis and Synthesis. , 1985 .

[35]  Theodore V. Galambos,et al.  Load and Resistance Factor Design for Steel , 1978 .

[36]  Jianye Ching,et al.  Impact of spatial variability in undrained shear strength on active lateral force in clay , 2015 .

[37]  S. Kahraman.  Evaluation of simple methods for assessing the uniaxial compressive strength of rock , 2001 .

[38]  Samuel G. Paikowsky,et al.  LRFD Design and Construction of Shallow Foundations for Highway Bridge Structures , 2010 .

[39]  Kok-Kwang Phoon,et al.  Linking Site Investigation Efforts to Final Design Savings with Simplified Reliability-Based Design Methods , 2014 .

[40]  Yu Wang,et al.  Selection of site-specific regression model for characterization of uniaxial compressive strength of rock , 2015 .

[41]  Kok-Kwang Phoon,et al.  Evaluation of Geotechnical Property Variability , 1999 .

[42]  Yusuke Honjo,et al.  General and local estimation of local average and their application in geotechnical parameter estimations , 2007 .

[43]  Li Min Zhang,et al.  PROBABILISTIC LIMITING TOLERABLE DISPLACEMENTS FOR SERVICEABILITY LIMIT STATE DESIGN OF FOUNDATIONS , 2005 .

[44]  ChingJianye,et al.  Modeling piezocone cone penetration (CPTU) parameters of clays as a multivariate normal distribution , 2014 .

[45]  Takashi Nagao,et al.  Recent revision of Japanese Technical Standard for Port and Harbor Facilities based on a performance based design concept , 2009 .

[46]  Kok-Kwang Phoon,et al.  Probability distribution for mobilised shear strengths of spatially variable soils under uniform stress states , 2013 .

[47]  Wojciech Puła,et al.  Statistical soil characterization of Italian sites for reliability analyses , 2007 .

[48]  Kok-Kwang Phoon,et al.  Identification of statistically homogeneous soil layers using modified Bartlett statistics , 2003 .

[49]  Sung-Chi Hsu,et al.  Material Spatial Variability and Slope Stability for Weak Rock Masses , 2006 .

[50]  Kok-Kwang Phoon,et al.  Characterization of Model Uncertainty for Cantilever Deflections in Undrained Clay , 2015 .

[51]  A. FentonGordon,et al.  Geotechnical resistance factors for ultimate limit state design of deep foundations in frictional soils , 2011 .

[52]  Johan Spross,et al.  Extended multivariate approach for uncertainty reduction in the assessment of undrained shear strength in clays , 2014 .

[53]  Kok-Kwang Phoon,et al.  Impact of Statistical Uncertainty on Geotechnical Reliability Estimation , 2016 .

[54]  E. Eric Adams,et al.  Field study of dispersion in a heterogeneous aquifer , 1992 .

[55]  Fred H. Kulhawy,et al.  Manual on estimating soil properties for foundation design , 1990 .

[56]  M. Soulié,et al.  Modelling spatial variability of soil parameters , 1990 .

[57]  Yu Wang,et al.  Bayesian Model Comparison and Characterization of Undrained Shear Strength , 2014 .

[58]  K. Phoon,et al.  Characterisation of model uncertainties for laterally loaded rigid drilled shafts , 2005 .

[59]  Gordon A. Fenton,et al.  RELIABILITY OF TRADITIONAL RETAINING WALL DESIGN , 2005 .

[60]  Henry Petroski.  Failure as Source of Engineering Judgment: Case of John Roebling , 1993 .

[61]  Kok-Kwang Phoon,et al.  Reliability of geotechnical structures , 2016 .

[62]  Kok-Kwang Phoon,et al.  Establishment of generic transformations for geotechnical design parameters , 2012 .

[63]  F. H. Kulhawy,et al.  Probabilistic Hyperbolic Models for Foundation Uplift Movements , 2007 .

[64]  ChingJianye,et al.  Modeling parameters of structured clays as a multivariate normal distribution , 2012 .

[65]  Lei Wang,et al.  Robust Geotechnical Design of Drilled Shafts in Sand: New Design Perspective , 2013 .

[66]  Mark B. Jaksa,et al.  Modeling the natural variability of over-consolidated clay in Adelaide, South Australia , 2006 .

[67]  ChingJianye,et al.  Multivariate distribution for undrained shear strengths under various test procedures , 2013 .

[68]  Gordon A. Fenton,et al.  Serviceability limit state design of deep foundations , 2014 .

[69]  D. V. Griffiths,et al.  Load and resistance factor design of shallow foundations against bearing failure , 2008 .

[70]  Samuel G. Paikowsky,et al.  Developing LRFD design specifications for bridge shallow foundations , 2009 .

[71]  ChingJianye,et al.  Correlations among some clay parameters — the multivariate distribution , 2014 .

[72]  William Cavers,et al.  Resistance Factors for Settlement Design , 2005 .

[73]  K. Phoon,et al.  Observations on Geotechnical Reliability-Based Design Development in North America , 2013 .

[74]  Armin W. Stuedlein,et al.  Reliability-Based Serviceability Limit State Design of Spread Footings on Aggregate Pier Reinforced Clay , 2014 .

[75]  D. V. Griffiths,et al.  Reliability-based geotechnical design in 2014 Canadian Highway Bridge Design Code , 2016 .

[76]  Yu Wang,et al.  Probabilistic characterization of Young's modulus of soil using equivalent samples , 2013 .

[77]  G. Fenton.  Random Field Modeling of CPT Data , 2000 .

[78]  Kok-Kwang Phoon,et al.  Performance of reliability-based design code formats for foundations in layered soils , 2013 .

[79]  ChingJianye,et al.  Transformations and correlations among some clay parameters — the global database , 2014 .

[80]  Yu Wang,et al.  Evaluation of rock property variability , 2017 .

[81]  Kok-Kwang Phoon,et al.  A quantile-based approach for calibrating reliability-based partial factors , 2011 .

[82]  F. H. Kulhawy,et al.  Characterization of Model Uncertainties for Augered Cast-In-Place (ACIP) Piles under Axial Compression , 2006 .

[83]  Masahiro Shirato,et al.  DEVELOPMENT OF THE DESIGN CODES GROUNDED ON THE PERFORMANCE-BASED DESIGN CONCEPT IN JAPAN , 2010 .

[84]  K. Phoon,et al.  Statistical characterization of random field parameters using frequentist and Bayesian approaches , 2016 .

[85]  Johan V. Retief,et al.  Characterization of Model Uncertainty in the Static Pile Design Formula , 2011 .

[86]  Ki-Il Song,et al.  Effects of spatially variable weathered rock properties on tunnel behavior , 2011 .

[87]  Rodrigo Salgado,et al.  Assessment of current load factors for use in geotechnical load and resistance factor design , 2003 .