A reduction technique and a computational procedure are presented for predicting the tire contact response and evaluating the sensitivity coefficients of the different response quantities. The sensitivity coefficients measure the sensitivity of the contact response to variations in the geometric and material parameters of the tire. The tire is modeled using a two-dimensional laminated anisotropic shell theory with the effects of variation in geometric and material parameters, transverse shear deformation and geometric nonlinearities included. The contact conditions are incorporated into the formulation by using a perturbed Lagrangian approach with the fundamental unknowns consisting of the stress resultants, the generalized displacements, and the Lagrange multipliers associated with the contact conditions. The elemental arrays are obtained by using a modified two-field, mixed variational principle. For the application of the reduction technique, the tire finite element model is partitioned into two regions. The first region consists of the nodes that are likely to come in contact with the pavement, and the second region includes all the remaining nodes. The reduction technique is used to significantly reduce the degrees of freedom in the second region. The effectiveness of the computational procedure is demonstrated by a numerical example of the frictionless contact response of the space shuttle nose-gear tire, inflated and pressed against a rigid flat surface.
[1]
Ahmed K. Noor,et al.
Exploiting symmetries in the modeling and analysis of tires
,
1987
.
[2]
Peter Wriggers,et al.
Algorithms for non-linear contact constraints with application to stability problems of rods and shells
,
1987
.
[3]
J. A. Tanner,et al.
Computational Methods for Frictional Contact With Applications to the Space Shuttle Orbiter Nose-Gear Tire
,
1996
.
[4]
K. Bathe,et al.
Finite Element Methods for Nonlinear Problems
,
1986
.
[5]
J. L. Sanders,et al.
NONLINEAR THEORIES FOR THIN SHELLS
,
1963
.
[6]
J. C. Simo,et al.
A perturbed Lagrangian formulation for the finite element solution of contact problems
,
1985
.
[7]
Ahmed K. Noor,et al.
Analysis of aircraft tires via semianalytic finite elements
,
1990
.
[8]
Ahmed K. Noor,et al.
On making large nonlinear problems small
,
1982
.
[9]
Bernard Budiansky,et al.
Notes on nonlinear shell theory.
,
1968
.
[10]
Ahmed K. Noor,et al.
Advances and trends in the development of computational models for tires
,
1985
.
[11]
Peter Wriggers,et al.
Finite Element Postbuckling Analyis of Shells with Nonlinear Contact Constraints
,
1986
.