Nonlinear dynamic response of cable-suspended systems under swinging and heaving motion

In order to enhance the fidelity, convenient and flexibility of swinging motion, the structure of incompletely restrained cablesuspended system controlled by two drums was proposed, and the dynamic response of the system under swinging and heaving motion were investigated in this paper. The cables are spatially discretized using the assumed modes method and the system equations of motion are derived by Lagrange equations of the first kind. Based on geometric boundary conditions and linear complementary theory, the differential algebraic equations are transformed to a set of classical difference equations. Nonlinear dynamic behavior occurs under certain range of rotational velocity and frequency. The results show that asynchronous motion of suspension platform is easily caused imbalance for cable tension. Dynamic response of different swing frequencies were obtained via power frequency analysis, which could be used in the selection of the working frequency of the swing motion. The work will contribute to a better understanding of the swing frequency, cable tension and posture with dynamic characteristics of unilateral geometric and kinematic constraints in this system, and it is also useful to investigate the accuracy and reliability of instruments in future.

[1]  F. Bekes,et al.  Motion control of a tendon-based parallel manipulator using optimal tension distribution , 2004, IEEE/ASME Transactions on Mechatronics.

[2]  Underconstrained planar cable-direct-driven robots: A trajectory planning method ensuring positive and bounded cable tensions , 2010 .

[3]  Islam S. M. Khalil,et al.  Precise Localization and Control of Catalytic Janus Micromotors Using Weak Magnetic Fields , 2015 .

[4]  Jong-Oh Park,et al.  Trajectory generation to suppress oscillations in under-constrained cable-driven parallel robots , 2016 .

[5]  Juan Carlos Arevalo,et al.  Identifying Ground-Robot Impedance to Improve Terrain Adaptability in Running Robots , 2015 .

[6]  Paolo Gallina,et al.  Cable-Direct-Driven Robot (CDDR) with Passive SCARA Support: Theory and Simulation , 2006, J. Intell. Robotic Syst..

[7]  Christoph Glocker,et al.  Modeling and analysis of rigid multibody systems with translational clearance joints based on the nonsmooth dynamics approach , 2010 .

[8]  Hamid D. Taghirad,et al.  Robust PID control of fully-constrained cable driven parallel robots , 2014 .

[9]  Şahin Yildirim,et al.  The Use of Neural Network Predictors for Analyzing the Elevator Vibrations , 2014 .

[10]  Moharam Habibnejad Korayem,et al.  Dynamic load-carrying capacity of cable-suspended parallel manipulators , 2009 .

[11]  Yingzheng Liu,et al.  Numerical Simulation of Unsteady Turbulent Flow Induced by Two-Dimensional Elevator Car and Counter Weight System , 2007 .

[12]  Jean-Pierre Merlet,et al.  Kinematics of the wire-driven parallel robot MARIONET using linear actuators , 2008, 2008 IEEE International Conference on Robotics and Automation.

[13]  L. D. Viet.  Crane sway reduction using Coriolis force produced by radial spring and damper , 2015 .

[14]  Jean-Pierre Merlet,et al.  Stability Analysis of Underconstrained Cable-Driven Parallel Robots , 2013, IEEE Transactions on Robotics.

[15]  nbsp,et al.  Minimum-time Approach to Obstacle Avoidance Constrained by Envelope Protection for Autonomous UAVs , 2009 .

[16]  Mustafa Shabbir Kurbanhusen,et al.  Force-closure workspace analysis of cable-driven parallel mechanisms , 2006 .

[17]  Muhammad Ekhlasur Rahman,et al.  Experimental investigation on the hysteresis behavior of the wire rope isolators , 2015 .

[18]  Just L. Herder,et al.  Design of a Statically Balanced Tensegrity Mechanism , 2006 .

[19]  Matti Linjama,et al.  Displacement control of a mobile crane using a digital hydraulic power management system , 2013 .

[20]  Vijay R. Kumar,et al.  Workspaces of Cable-Actuated Parallel Manipulators , 2006 .

[21]  C. Gosselin,et al.  On the determination of the force distribution in overconstrained cable-driven parallel mechanisms , 2011 .

[22]  C. Lanczos.  The variational principles of mechanics , 1949 .

[23]  Marco Carricato.  Inverse Geometrico-Static Problem of Under-Constrained Cable-Driven Parallel Robots with Three Cables , 2011 .

[24]  W. Zhu,et al.  An Accurate Spatial Discretization and Substructure Method With Application to Moving Elevator Cable-Car Systems—Part I: Methodology , 2013 .

[25]  Peter C. Y. Chen,et al.  Non-smooth dynamical analysis and experimental validation of the cable-suspended parallel manipulator , 2012 .

[26]  Qian Zhou,et al.  Static analysis of cable-driven manipulators with non-negligible cable mass , 2004, IEEE Transactions on Robotics.

[27]  Peter Eberhard,et al.  A linear complementarity formulation on position level for frictionless impact of planar deformable bodies , 2006 .

[28]  Franc¸ois Pierrot,et al.  A Parallel Cable-Driven Crane for Scara-Motions , 2008 .

[29]  Zhihua Liu,et al.  Research on Longitudinal Vibration Characteristic of the Six-Cable-Driven Parallel Manipulator in FAST , 2013 .

[30]  Paul Williams,et al.  Dynamic multibody modeling for tethered space elevators , 2009 .

[31]  Jacek Kłosiński,et al.  Swing-free stop control of the slewing motion of a mobile crane , 2005 .

[32]  Edward J. Haug,et al.  A Hybrid Numerical Integration Method for Machine Dynamic Simulation , 1986 .

[33]  H. T. Shu,et al.  Longitudinal vibration of a hoist rope coupled with the vertical vibration of an elevator car , 1991 .

[34]  Yandong Wang,et al.  Design and Trajectory Analysis of Incompletely Restrained Cable-suspension Swing System Driven by Two Cables , 2015 .

[35]  S. G. Ponnambalam,et al.  Obstacle avoidance control of redundant robots using variants of particle swarm optimization , 2012 .