Tailoring the crystalline morphology and mechanical property of olefin block copolymer via blending with a small amount of UHMWPE

[1]  Jiachun Feng,et al.  Toughened polypropylene random copolymer with olefin block copolymer , 2016 .

[2]  Q. Fu,et al.  Enhanced mechanical properties of olefin block copolymer by adding a quaternary ammonium salt functionalized graphene oxide , 2016 .

[3]  Shiping Zhu,et al.  Thermal and mechanical properties of ultrahigh-molecular-weight ethylene/1-hexene copolymers prepared by living polymerization with fluorinated bis(phenoxy-imine) titanium(IV) catalyst , 2015 .

[4]  M. Urban,et al.  One-Step Synthesis of Amphiphilic Ultrahigh Molecular Weight Block Copolymers by Surfactant-Free Heterogeneous Radical Polymerization. , 2015, ACS macro letters.

[5]  Anne M. LaPointe,et al.  Allyl-Terminated Polypropylene Macromonomers: A Route to Polyolefin Elastomers with Excellent Elastic Behavior , 2015 .

[6]  Wei Yang,et al.  An extremely uniform dispersion of MWCNTs in olefin block copolymers significantly enhances electrical and mechanical performances , 2015 .

[7]  Q. Fu,et al.  The effect of hard block content on the orientation and mechanical properties of olefin block copolymer films as obtained via melt stretching , 2015 .

[8]  Jiachun Feng,et al.  Regulation of crystalline morphologies and mechanical properties of olefin multiblock copolymers by blending polymer with similar architecture of constituent blocks , 2015 .

[9]  A. Bhowmick,et al.  Tailored Nanostructured Thermoplastic Elastomers from Polypropylene and Fluoroelastomer: Morphology and Functional Properties , 2015 .

[10]  Kaitlyn E. Crawford,et al.  De Novo Design of a New Class of "Hard-Soft" Amorphous, Microphase-Separated, Polyolefin Block Copolymer Thermoplastic Elastomers. , 2015, ACS macro letters.

[11]  Q. Fu,et al.  In situ micro and nano fibrillar reinforced elastomer composites based on polypropylene (PP)/olefinic block copolymer (OBC) , 2015 .

[12]  F. Rousset,et al.  Mechanisms of Chain Reentanglement during the Sintering of UHMWPE Nascent Powder: Effect of Molecular Weight , 2015 .

[13]  J. Carpentier,et al.  Discrete cationic complexes for ring-opening polymerization catalysis of cyclic esters and epoxides. , 2015, Chemical reviews.

[14]  N. Ning,et al.  Property enhancement of PP-EPDM thermoplastic vulcanizates via shear-induced break-up of nano-rubber aggregates and molecular orientation of the matrix , 2015 .

[15]  Q. Fu,et al.  Evolution of unique nano-cylindrical structure in poly(styrene-b-isoprene-b-styrene) prepared under "dynamic packing injection moulding". , 2015, Soft matter.

[16]  Yongri Liang,et al.  Random hyperbranched linear polyethylene: One step production of thermoplastic elastomer , 2015 .

[17]  A. Gergely,et al.  Thermoplastic elastomers of alloocimene and isobutylene triblock copolymers , 2015 .

[18]  Q. Fu,et al.  Largely Improved Mechanical Properties of a Poly(styrene-b-isoprene-b-styrene) Thermoplastic Elastomer Prepared under Dynamic-Packing Injection Molding , 2014 .

[19]  T. Hoye,et al.  Sustainable Thermoplastic Elastomers from Terpene-Derived Monomers. , 2014, ACS macro letters.

[20]  F. Rousset,et al.  Diffusion versus Cocrystallization of Very Long Polymer Chains at Interfaces: Experimental Study of Sintering of UHMWPE Nascent Powder , 2014 .

[21]  M. Hillmyer,et al.  Carboxy-Telechelic Polyolefins in Cross-Linked Elastomers , 2014 .

[22]  Chi-xing Zhou,et al.  Mesophase Separation and Rheology of Olefin Multiblock Copolymers , 2014 .

[23]  Zhiqiang Fan,et al.  Regulation of Crystallization Kinetics, Morphology, and Mechanical Properties of Olefinic Blocky Copolymers , 2014 .

[24]  Zhiqiang Fan,et al.  Olefinic blocky copolymer/montmorillonite nanocomposites with collapsed clay layers , 2013 .

[25]  B. Rieger,et al.  Polymerization Behavior of C1-Symmetric Metallocenes (M = Zr, Hf): From Ultrahigh Molecular Weight Elastic Polypropylene to Useful Macromonomers , 2013 .

[26]  Wen-Li Wu,et al.  Imaging the Molecular Structure of Polyethylene Blends with Broadband Coherent Raman Microscopy. , 2012, ACS macro letters.

[27]  N. Ning,et al.  Processing temperature dependent mechanical response of a thermoplastic elastomer with low hard segment , 2012 .

[28]  J. Kornfield,et al.  Direct Route to Colloidal UHMWPE by Including LLDPE in Solution during Homogeneous Polymerization of Ethylene. , 2012, ACS macro letters.

[29]  Q. Fu,et al.  Formation of Interlinked Shish-Kebabs in Injection-Molded Polyethylene under the Coexistence of Lightly Cross-Linked Chain Network and Oscillation Shear Flow , 2012 .

[30]  R. Register,et al.  Melt and Solid-State Structures of Polydisperse Polyolefin Multiblock Copolymers , 2012 .

[31]  E. Kramer,et al.  Tough and Elastic Thermoplastic Organogels and Elastomers Made of Semicrystalline Polyolefin-Based Block Copolymers , 2012 .

[32]  B. Hsiao,et al.  Tuning the superstructure of ultrahigh-molecular-weight polyethylene/low-molecular-weight polyethylene blend for artificial joint application. , 2012, ACS applied materials & interfaces.

[33]  B. Hsiao,et al.  Effects of Block Architecture on Structure and Mechanical Properties of Olefin Block Copolymers under Uniaxial Deformation , 2011 .

[34]  Xiuhong（李秀宏） Li,et al.  Critical Strain for Shish-Kebab Formation , 2010 .

[35]  J. Weinhold,et al.  Photonic Polyethylene from Self-Assembled Mesophases of Polydisperse Olefin Block Copolymers , 2009 .

[36]  J. Keum,et al.  Formation and Stability of Shear-Induced Shish-Kebab Structure in Highly Entangled Melts of UHMWPE/HDPE Blends , 2008 .

[37]  A. Fujiwara,et al.  Ultrahigh Molecular Weight Ethene Copolymers from Metallocene and Ziegler Catalysts , 2007 .

[38]  C. L. P. Shan,et al.  Block Index for Characterizing Olefin Block Copolymers , 2007 .

[39]  K. Nishida,et al.  Effects of high molecular weight component on crystallization of polyethylene under shear flow , 2006 .

[40]  P. Hustad,et al.  Catalytic Production of Olefin Block Copolymers via Chain Shuttling Polymerization , 2006, Science.

[41]  E. Thomas,et al.  Optically Transparent and High Molecular Weight Polyolefin Block Copolymers toward Self-Assembled Photonic Band Gap Materials , 2006 .

[42]  E. W. Meijer,et al.  Molecular recognition in a thermoplastic elastomer. , 2005, Journal of the American Chemical Society.

[43]  Ryoji Mori,et al.  Ethylene/Higher α-Olefin Copolymerization Behavior of Fluorinated Bis(phenoxy−imine)titanium Complexes with Methylalumoxane: Synthesis of New Polyethylene-Based Block Copolymers , 2005 .

[44]  Li Wei,et al.  Selective hydrogenation of SBS catalyzed by Ru/TPPTS complex in polyether modified ammonium salt ionic liquid , 2004 .

[45]  Ke Li,et al.  Active Nb2O5-supported nickel and nickel–copper catalysts for methane decomposition to hydrogen and filamentous carbon , 2004 .

[46]  M. Matsuo,et al.  Characteristics of ultradrawn blend films of ethylene-methyl methacrylate copolymer and ultrahigh molecular weight polyethylene prepared by gelation/crystallization from solutions estimated by X-ray, positron annihilation, and 13C NMR , 2004 .

[47]  B. Hsiao,et al.  Shear-Induced Precursor Structures in Isotactic Polypropylene Melt by in-Situ Rheo-SAXS and Rheo-WAXD Studies , 2002 .

[48]  A. Dekmezian,et al.  Metallocene-Based Branch−Block Thermoplastic Elastomers , 2000 .

[49]  A. Keller,et al.  Fluid flow: Turbulence splits polymers , 1984, Nature.